Tender For Repair Work Of Type-4 And Type-3 Houses Located In Officers Colony, Jagdishpur Colony And Near Rajkiya Beach Bhandar Naugarh Under The Public Works Department In Siddharthnagar District.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
0 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Siddharth Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Work Of Type-4 And Type-3 Houses Located In Officers Colony, Jagdishpur Colony And Near Rajkiya Beach Bhandar Naugarh Under The Public Works Department In Siddharthnagar District.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jul-2026 | Date2 | Date | 28-Jul-2026 |
| 2 | 20-Jul-2026 | Date | Date | 25-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meter (200fl) As per SI No.706 |
| 2 | 12mm thick plaster with cement mortar in proportion of 1;3 cement and sand of 1.25 F.M. over brick work minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. SI no. 583 |
| 3 | Scraping old white or colour wash including disposal of refuse as directed by the directed by Engineer-in-charge within a distance of 60 meters (200 feet). As per SI No.708 |
| 4 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth copmlete. DSR 13.80 |
| 5 | M 150 class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.As per S.I No.305 |
| 6 | 2.5cm. (I\\") thick 1:2:4 cement concrete floor with cement, approved coarse sand and 2cm. Graded approved stone ballast laid in planels finished with 3mm (1/8\\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm. (3\\") local sand and brick ballast 4 cm. Gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any giving them a uniform finish, including supply of all materials, labour, T&P etc. required for proper completion of the work. .as per S.I No.601 B |
| 7 | Distemper one coat with oil bound distemper of approved brand manufacture and required shade on decoreted wall surfaces to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as of british, shalimar, asian paints after throughly brushing surface free from mortar droppings and other foreign matter and also including preparing the surface even also sand prepared smooth including cost of all materials.As per S.I no.649+650 |
| 8 | Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give as even shade, including supply of all materials, labour and T&P etc. required for proper completion of the work.As per S.I No.660+661 |
| 9 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work As Per DSR 13.60.1 |
| 10 | One priming coat and one coat of dry distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work.As per S.I No.681+682 |
| 11 | Supplying and fixing mosquito proof jali with sheesham wood batten around the jali, including the cost of jali, bottom, Nails, screws etc. required for proper completion of the work...As per SI No-456 |
| 12 | Painting or varnishing new iron work in smallareas or new wood with one coat (up to one sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mix paint (2nd quality synthetic cnamel paint of approved brand such as British paint. Shalimar, Asian or equivalent supply of all materials, labour, T&P etc. required for proper completion of work. Paint to be used should confirm the..As per SI No 641 |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.As per D.S.R. 11.41 |
| 14 | Supply and fixing 6 mm.(1/4'') China white glazed tiles in flooring or in skirting or Dado laid with 1;3 cement and approved coarse sand mortar finished with white cement slurrry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required of proper completion of the work. As per SI no 628 |
| 15 | Additional cost of fixing glass panes with C.P. Teak wood beading and felt as desired by the Engineer Incharge instead of with putty and bard including cost of all material T&P etc. required for proper completion of the work.. As per SI no 410 |
| 16 | Supply and fixing of 4.5cm (1.3/4\\") thick C.P. teak wood part panelled and part glazed door and window shutters including supply and fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts locks, handles spring and / or other fittings but excluding their supply and including painting with two coats of Black Japan on all Iron fittings if necessary & including fixing the glass panes with putty & bard. Glass to be 0.64kg (21 oz fittings with necessary screews to be supplied departmeutally..As per SI no 470 |
| 17 | R.C.C. work with cement approved coarse sand and 20mm. gauge approved stone grit in the proportion of 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including S/o all materials required for proper completion of the work...As per SI no 283 |
| 18 | Mild Steel or iron work in plain work such as in reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shapes as necessary and bending for the proper completion of work and including supply of steel and its wastage etc. and Supply of all labour T & P required for proper completion of work si. no 504 |
| 19 | Mild steel or iron work of small sizes and sections such as shading down bolts, hold fast, tie rods, gratings etc. (when not included in an over all rates) wrought to required form including supply of steel and its wastage including cost of bolts, nuts if required and welding, grinding and making holes as required for proper completion of work Fabrication of holes, Doors chaukhats and nosing..si. no 502 |
| 20 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. AS Per DSR 10.29.1 |
| 21 | Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:AS Per DSR No. 9.96.1. size 300x16 mm |
| 22 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm. AS Per DSR No. 9.74.1 |
| 23 | Providing and fixing bright finished brass handles with screws etc. complete :125 mm. AS Per DSR No. 9.81.1 |
| 24 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete AS Per DSR No. 9.82 |
| 25 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.(a) 110mm diameter As Per DSR 12.41.2 |
| 26 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.a) 110mm As Per DSR 12.43.2 |
| 27 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. As Per DSR 12.44 |
| 28 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity-coloured-White |
| 29 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 30 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Semi rigid pipe a) 32mm dia As Per DSR 17.28.1.1 |
| 31 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall :25 mm dia. nominal bore |
| 32 | Providing and fixing brass bib cock of approved quality: 20 mm nominal bore |
| 33 | Providing and fixing brass stop cock of approved quality: 20 mm nominal bore |
| 34 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests As Per DSR 17.1.1 |
| 35 | Same as above but for European type W.C. pan with white plastic seat and lid.Make- Cera,Hindware. As Per DSR 17.2.1 |
| 36 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.a) Circular Tank As Per DSR 18.48A |
| 37 | Supply and Fixing of Boaring Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 25, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender