Tender For Under Nagar Panchayat Budhana, Roofing And Commercial Repair And Painting Work Of Shops And Commercial Areas On Muzaffarnagar - Kandhla Road.
Tender Value
4.74 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
9 days left
EMD
47467
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Muzaffarnagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Under Nagar Panchayat Budhana, Roofing And Commercial Repair And Painting Work Of Shops And Commercial Areas On Muzaffarnagar - Kandhla Road.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old damage existing plaster including disposel of refuse as directed by engineer-in-charge within a distance of 60 meter.In side of office...Asper S.I.No. 706 |
| 2 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 metre (200 feet). S.I. No. 708 |
| 3 | Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). S.I. No. 692 |
| 4 | Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge with in a distance of 60 metre (200 feet). Asper S.I. No.- 694 |
| 5 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). S.I. No.- 697 |
| 6 | Excavation in foundation in ordinary soil(Loam,clay or sand)including lift upto 1.50 M.and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenchs or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenche.(Where machine can not move). S.I.No. 251(a) |
| 7 | M-150 brick work in 1:4 one cement & four Coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work. S.I.No.305 a |
| 8 | Cement Concrete with 4 cm gauge approved stone Ballast,coarse sand & cement in the proportion of (8:4:1) including supply of all materials,labour,Tools & plants etc.required for proper completion of the work. Asper S.I. No. 279 |
| 9 | R.C.C. work with 2 cm gauge stone grit,coarse sand and cement in proprtion of 3:1.5:1 in Beam & Roof slabs including supply of all materials, labour, T&P etc. required for proper completion of the work. S.I.No. 284a. |
| 10 | M.S. (tor steel or plain) in plain work such as R.C.C. or R.B. work includeing handling for proper shape and including supply all the material, labour, T&P etc. S.I.No. 504.As per Analysis with SAIL TOR STEEL ATES |
| 11 | 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not be less than 1 cm including supply of all materials, labour, tools & plants etc. required for proper completion of the work. S.I.No. 584 |
| 12 | 2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Asper S.I. No. 661 |
| 13 | Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3\\"x5\\") cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. S.I. No. 520 |
| 14 | Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. S.I. No. 521 |
| 15 | Providing and fixing top cover for rolling shutters 2.50 meter wide S.I. No. 522 |
| 16 | Providing and fixing ball bearing for rolling shutters. S.I. No. 523 |
| 17 | Providing wall putty on new surface with approved quality material of Berger/J.K.Birla or similar make 2 coats. S.I.NO. New item./Ch-15. |
| 18 | Finishing wall with one coat of weather coat of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour,Tools & plant etc. required for proper completion of the work. S.I. No. 662 N.I. |
| 19 | Paintting or varnishing work in small areas or new wood work with one coat (upto one squre meter) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, T&P etc. required for proper completion of the work. S.I.No. (641+642) |
| 20 | Wiring point for Light with 1.5 sqmm PVC insulated single core cable including pvc conduit pipe S.I. No. 131c |
| 21 | Wiring point for plug with 1.5 sqmm PVC insulated single core cable including pvc conduit pipe S.I. No. 134c |
| 22 | Supply and fixing of switch box made up of 16 swg 250x200x65 thick S.I. No. 162 |
| 23 | Supply/Wiring of submain with two number 4 sqmm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit ... |
| 24 | S/F of 63 Amp 4 pole Isolator of Asper S.I. No. 1007 (B) categery B |
| 25 | S/F of 25 bat led with approved quality As per direction E/I (Market rate) |
| 26 | Supply and Fixing Inauguration stone with all completion. (L.S.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender