Tender For special Repair Ors Md Accn Bldg No Eb- 39 At (Old Block Line) Of Demo Bn , anganwadi center Under Ge (Awc)Mhow
Tender Value
43.71 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
17 days left
EMD
87420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Ors Md Accn Bldg No Eb- 39 At (Old Block Line) Of Demo Bn , anganwadi center Under Ge (Awc)Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor) beams, staircase, landing, chajjas and similar suspended work complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Scratch free, double charged, vitrified ceramic tiles 9 to 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 5 | M&L for Coloured Non Skid ceramic joint free tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sq. m but not exceeding 0.18 Sq.m. in floors etc,including 15 thick screed bed set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile complete all as specified and as directed. |
| 6 | S&F Glazed ceramic tiles in vertical surface 450 x 350x 7 mm thick ,including 10 mm thick secreed bed set and jointed in neat cement slurry and pointed in white or cloured cement complete all as specified and as directed. Note : Rate includes for cutting for offsets etc complete all as specified and as directed. |
| 7 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 8 | M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above. |
| 9 | Description same as per item No 8.00 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed. |
| 10 | M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface |
| 11 | M & L for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement complete all as specified and directed. |
| 12 | M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes complete all as specifed and directed. |
| 13 | Material and Labour Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-40 conforming to IS 25658-2006 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 14 | M&L for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in Kitchen platform and Cover slab for manholes etc set in cement mortor 1:4 including use and waste necessary form work (Reinforced shall be measured and paid seprately) all as specefied |
| 15 | M&L for cement concrete Type C2 1:3:6 40 mm graded aggegate as in footings columns ,beams walls CM 1:4 including use and waste necessary form work (Reinforced shall be measured and paid seprately) all as specefied |
| 16 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specifed and directed. |
| 17 | Description all as per ser item No. 16.00 above but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders complete all as specifed and directed. |
| 18 | M&L for granite slabs 20mm thick machine cut bedded laid over cement screed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl grinding moulding rounding chamfering and polishing complete all as specified and directed. |
| 19 | M&L for machine cut Cudappa stone slab flooring 20-25mm thick laid over and including 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing with beeswax polish complete all as specified and as directed. |
| 20 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. |
| 21 | M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 22 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed. |
| 23 | Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed. |
| 24 | M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified . |
| 25 | Supply only integral water proofing compound. |
| 26 | M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts wells, cesspits, manholes, pier holes etc not exc 10sqm on plan and getting out in hard/dense soil |
| 28 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with all kind of soil complete all as specified and directed. |
| 29 | M&L for removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge |
| 30 | M&L for PCC type D2 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass Concrete complete all as specified and directed. |
| 31 | Taking down chowkats with shutters (without taking off shutters from the frame exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit. |
| 32 | Description all as per item No. 31.00 above in before but n exc 1.5 Sqm |
| 33 | S&F Pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied & fixed |
| 34 | S&F pressed steel door frames of size 105 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed. |
| 35 | S&F IInd class hardwood panelled shutters of 40mm thick (any number of panel) with panels of timber flat on both sides (feathered edged or of veneeered particle boad medium density, wood particle board with commercial face veneers, complete all as specified and as directed. |
| 36 | S&F 28 to 30mm thick factory made Solid WPC PVC Moulded Door shutter with 2, 4, or 6 raised panel design with solid core of particle board of 24mm thick (12mm x 2), The particle board shall be lipped with 25mm thick baton made from PVC sheets on the stile where hinges are to be fitted, On the three other sides the lipping shall be of 15mm thick PVC baton, 2mm thick Moulded Prelam PVC sheet shall be stuck on the front face of the particle board suitable prepared to accept the moulded design and 2mm Plain colour PVC sheet shall be stuck on the back face of the particle board with thermosetting adhesive,The 2mm thick PVC sheets shall be stuck with lipping by using solvent cement etc complete all as per manufacturers instructions and as directed. |
| 37 | S&F 30mm thick locally fabricated 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed. |
| 38 | Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification all as directed. |
| 39 | Material and labour Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck insid |
| 40 | S & F Alluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be following specification complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(iv) 4 mm thick tinted glass superior quality.(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(vii) Sliding rollers per shutter - 02 Nos.including satety steel grill(viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. |
| 41 | S & F powder coated Alluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 42 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 43 | S&F 250 mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 44 | S&F 100 mm size of Butt hinges, medium weight cold rolled mild steel complete door etc |
| 45 | S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified . |
| 46 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified . |
| 47 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specifed and directed. |
| 48 | S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as directed and specified and as directed. |
| 49 | M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified & as directed. |
| 50 | S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 75 mm,etc complete all as specified and directed. |
| 51 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and brass polished complete all as specified and directed. |
| 52 | S& F 18 mm thick factory made PVC sheet one side pre laminated sheet kitchen cabinet shutter/cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bodning etc complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F factory made PVC shelf/partition of required size consisting of panel of 12 mm thick celuka PVC ply and for supporting the hold of shelf/partition and shall provide 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the fronth of the self / partition to be edge lipped by 18mm width x 1 mm thick PVC sheet of density 600kg/cum manufactured by ISO 9001-2015 Certified company using solvent cement etc complete all as specified and as directed. |
| 54 | S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed |
| 55 | S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed . |
| 56 | S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed . |
| 57 | S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00 mm) of any shape withside sliding roller clip and silding rails on both side fixed with steel screws incl all fixing arrangements complete all as specified and directed. |
| 58 | Description all as per ser item No. 57.00 above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed. |
| 59 | Description all as per ser item No. 57.00 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed. |
| 60 | Description all as per ser item No. 57.00 above but grain basket size 20 x 17 x 6 inches complete all as specified and directed. |
| 61 | Description all as per ser item No. 57.00 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed. |
| 62 | Description all as per ser item No. 57.00 above but plain basket size 20 x 17 x 8 inches complete all as specified and directed. |
| 63 | S&F Harrison rails ,mild stainless steel curtain rod cromium plated with brackets 25mm dia including necesary SS clamp complete all as specified & as directed. |
| 64 | Taking down 15mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 65 | Taking down 20mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 66 | Supplying and fixing of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified |
| 67 | Supplying and fixing of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified |
| 68 | S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified including dismantling old 500 ltr water tank complete all as specified and directed. |
| 69 | S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed. |
| 70 | S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 71 | S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 72 | S&F Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. (Make : Cat No CON-107KN of Jaquar & equivelent) |
| 73 | S&F Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. (Make : Cat No CON-037 KN of Jaquar or equivelent make in CERA, Hindware, Parryware as approved by GE) |
| 74 | S&F Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Cat No CON-273KN of Jaquar or equivelent make in CERA, Hindware, Parryware as approved by GE) |
| 75 | S&F Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed. (Make : Cat No CON-273KN of Jaquar & equivelent) |
| 76 | S&F chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. (Make : Cat No OHS-1667 of Jaquar or euivelent) |
| 77 | S&F in repairs stainless steel Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary PVC outlet pipe and coupling complete all as specified and directed. |
| 78 | S & F in repair stainless steel plate rack 31\\" X 36\\" X 10\\" made up of 1mm thick sheet (Non magnetic) complete all as specified and directed. |
| 79 | S&F in repairs Vitreous China squatting pan , \\"Orissa\\" pattern size 580 X 440 mm white with integral footrest (excluding flushing cistern & flush pipe) with 110mm dia PVC SWR 'P' or 'S' trap, fixing of cistern, complete including provision of cement concrete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in repairs for vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillar tap, 01 Nos 32mm waste coupling , one pair of MS bracket, cutting for and pinning in ends of brackets complete all as specified and directed. |
| 81 | Supply and fix in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed. |
| 82 | S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and directed. |
| 83 | S&F in repairs 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC / alluminium frame and fixed to wooden plugs with chromum plated brass screws, cup washers, complete all specified and directed. |
| 84 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 85 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down existing pipe complete all as specified and directed. |
| 86 | S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed. |
| 87 | S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed. |
| 88 | S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed. |
| 89 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed. |
| 90 | S&F PVC(SWR) vent cowl 110mm bore complete all specified and directed. |
| 91 | S&F PVC (SWR) bends 75 mm dia complete all specified and directed. |
| 92 | S&F PVC (SWR) bends with access door 75 mm dia complete all specified and directed. |
| 93 | S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all specified and directed. |
| 94 | S & F in repairs PVC (SWR) Floor trap/Nahani trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed. |
| 95 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm complete all specified and directed. |
| 96 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed. |
| 97 | S&F for PVC waste pipe for urinal/WHB with fitting etc 50 mm dia. 60mm long complete all specified and directed. |
| 98 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater,(eves gutter fitted in roof for collecting of rain water).stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof ,welding etc complete all as specified and directed. |
| 99 | Dismantling of old ceilling boarding, wooden sacntling any description fixed in any position with nails complete all as specified and directed by Engr-in-Charge. |
| 100 | Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) False ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The kwork shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. |
| 101 | Dismantling of AC sheets / Galvolume sheet / GI Sheet of corrugated or semicorrugated etc. sheets in roof coverings |
| 102 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 103 | M&L for MS framed structure roof trusses (framed), trussed, purlins, crane gantries and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed. |
| 104 | M & L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 105 | M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified |
| 106 | S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed. |
| 107 | S & F Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet 1.60 mm, etc complete all as specified and directed. |
| 108 | M & L for preparation of newly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 109 | Material and labour for Preparation of new or old painted wooden surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint . |
| 110 | M&L for preparation of newly/old plastered surfaces and applying two coat Acrylic emulsion distemper with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed (Note:-Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means) |
| 111 | Material and Labour for applying Two coats of 100% Premium exterior acrylic emulsion paint over applying 1 mm thick white wall care putty latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of equired shade (Company Depot Tinted) with silicon additives @ 1.43 liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm Note- (i) contractor shall furnished guarantee four years againts service rendered) (ii) primer and emulsion to be carred out through air less spray machine (mechanical means) |
| 112 | Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling rose, pendent, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site. |
| 113 | Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of concerned AGE E/M complete all as specified and as directed. |
| 114 | Taking down water heater any size/capacity, by disconnecting all electric and water supply connections and deposit to MES store yard of AGE E/M complete all as specified and as directed. |
| 115 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 116 | Taking down old / unserviceable distribution board/meter single phase by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 117 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC FRLS concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 118 | (a) One light point controlled by one, one way switch 5 Amps |
| 119 | (b) One fan point/ wall fan/exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 120 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 121 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 122 | (e) One bell point controlled by one, bell switch 5 Amps |
| 123 | Description all as per item No. 117.00 here in before but using 2.5 sq. mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq. mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 124 | S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 125 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 126 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 127 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 128 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 129 | S & F for Bell push modular 6 Amps single module complete all as specified. |
| 130 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified |
| 131 | S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 132 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq. mm nominal area and drawing into suitable size of PVC FRLS non metallic rigid heavy duty conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 Sqmm cable, one run of 6 Sqmm cable and one run of PVC conduit will be measured as one unit |
| 133 | S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq. mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. . |
| 134 | S & F for TPN phase segregated distribution board double door vertical type 4 way 415 volts, 50Hz suitable for MCCB incomer IP 43, IK 09 protection on wall/ floor with necessary cement work and electrical connections complete all as specified. |
| 135 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system, IP 43, IK 09 protection including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. |
| 136 | S & F MCCB TPN 415 volts, Icu=100% Ics with rupturing capacity 25 KA suitable for fixing on DB of capacity 63 to 100 Amps with extended terminals and of the same make as above item complete all as specified. |
| 137 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve, and of the same make as above item complete all as specified and as directed. |
| 138 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve, and of the same make as above item complete all as specified and as directed. |
| 139 | S&F water heater storage type (Geyser) 2 kW with inner container 25 ltrs, electrically operated, AC 230 V, 50 Hz, BEE 5 star rated. The inner tank should have a min 07 years warranty from the manufacturer including stainless steel hot water PTMT connections 15 mm size with nuts and length 450 mm, 3 core copper connecting wire with plug top connections complete all as specified and as directed. (Additional warranty on models having less than 07 years will not be accepted). The weight of the geyser (without box) shall be greater than 10 kgs. |
| 140 | S & F for ceiling fan, 230 Volts, 50Hz, 1200 mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than equal to 7.1 (without remote) as per BIS with necessary accessories and electrical connections from ceiling rose to fan terminal including writing the MES Number with synthetic enamel paint complete all as specified and as directed. |
| 141 | S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writing the MES Number with synthetic enamel paint complete all as specified and directed. Note :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). |
| 142 | S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 143 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe up to 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 144 | S&F PVC exhaust fan 200 mm AC 230 volt single phase including electrical connection and cutting of suitable hole for fitting of exhaust fan all as specified and directed by Engr-in-Charge |
| 145 | S & F single phase electric meter 10-30A including all electrical connection at site all as specified and directed by Engr-in-Charge |
| 146 | Supplying, testing and laying of XLPE insulated armoured, heave duty, aluminium conductor screened, PVC bedded UG cable 1100 volts grade of size 35 sqmm 2 core all as specified and directed by engr in charge |
| 147 | S&F in repairs angle holder modular type with cord grip cap, ISI marked complete all as specified and directed. |
| 148 | S&F in repairs 20 W LED batten 4 feet long, wall mounted, with integrated electronic driver, ISI marked complete all as specified and directed. |
| 149 | Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed. |
| 150 | M&L fine sand cushioning for cable protection in layers incl punning all as specified and directed. Note : Punned down thickness shall only be measured. |
| 151 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed. |
| 152 | Returning, filling in, trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed. |
| 153 | Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc1.5m above the starting point all as specified and as directed. |
| 154 | S & F tubes, 'light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender