Tender For Repair And Painting And Polishing Of Steel And Wooden Furniture And Renewal Of Furniture Against Ber In Otm Areas At installation Shivaji, Lonavla (8465/E8)
Tender Value
40 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
23 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting And Polishing Of Steel And Wooden Furniture And Renewal Of Furniture Against Ber In Otm Areas At installation Shivaji, Lonavla (8465/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Removing old and unserviceable parts / components of ALMIRAH LARGE and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD- 67, 67 (M),1031)(a) New lock (brass) 6 levers with duplicate key including fixing with suitable machine screws complete all as per drg. |
| 2 | All as per item No. 1 here-in-before but new chromium plated handle 100 mm long including fixing with suitable nut / pins all as per drg. |
| 3 | All as per item No. 1 here-in-before but new 3 way locking assembly (size of MS rod is 10 mm) including shackles and fixing with suitable screws / rivets for Almirah large all as per drg. |
| 4 | All as per item No. 1 here-in-before but new legs made out 1mm thick MS sheet bend to shape fix with suitable size rivets and gas welding as reqd all as specified and shown on drg. |
| 5 | All as per item No. 1 here-in-before but new shelves including fixing with suitable screws all as specified and shown on drg. |
| 6 | All as per item No. 1 here-in-before but removal of complete dents to get the surfaces smooth by applying of putty wherever necessary and two coat of spray painting manadatory in dual/single shade of synthetic enamel paint , colour as approved complete for internal & external surfaces all as directed by Engr-in-charge. |
| 7 | Removing old and unserviceable parts / components of ALMIRAH MEDIUM and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD- 67 (M),1032, 1034)(a) All as per item No. 1 here-in-before but lock of Almirah med steel |
| 8 | All as per Item No 2 but handle of Almirah med steel |
| 9 | All as per Item No 3 but 3 way locking assembly of Almirah med steel |
| 10 | All as per Item No 4 but legs of Almirah med steel |
| 11 | All as per Item No 5 but shelves of Almirah med steel |
| 12 | All as per Item No 6 but painting of Almirah med steel |
| 13 | Removing the existing U/S plywood from BED HARD STEEL & supply and fix 12 mm thick 7 ply commercial plywood BWR grade ISI Marked of same size with nut & bolt, including shoes etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/08 (R). Make of ply :Century ply/Archid ply/Green ply/Kit ply |
| 14 | Removing the existing U/S pre-laminted particle board from head rest of Bed Hard Steel, and S & F 18/19 mm pre laminated paticle board of same size, existing pattern with beading, screw etc complete all as shown on drawing. |
| 15 | Removing the existing U/S pre-laminted particle board from foot rest of Bed Hard Steel, and S & F 18/19 mm pre- laminated paticle board of same size, existing pattern with beading, screw etc complete all as shown on drawing. |
| 16 | Removal of complete dents to get the surfaces smooth by applying of putty wherever necessary and painting with two coat of spray painting of synthetic enamel black paint complete all as shown on drawing. |
| 17 | Removing the existing U/S plywood from \\"CHARPOY GI PIPE WITH PLYTOP\\" supply and fix 12 mm thick 7 ply commercial plywood BWR grade ISI Marked of same size with semi circular nut & bolt complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No: FD-220) Make of ply :Century ply/Archid ply/Green ply/Kit ply |
| 18 | M&L for two coat of synthetic enamel black paint where ever required all as specified & directed by Engr-in-charge. |
| 19 | Removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI pipe 32mm bore (ISI marked) medium grade including threading both sides all as specified in drg & directed by Engr-in-charge. |
| 20 | Removing of old damaged/broken short rail from charpoy and making of short rail from u/s long rail retreived from ser No. 19 above incl threading both sides & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge. |
| 21 | Removing of old damaged/broken legs from charpoy and making leg from u/s short rail retreived from ser No.20 above incl threading one side, S&F 3mm thick MS plate in bottom to be welded with legs & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge. |
| 22 | Removing old broken/damaged GI elbow and S&F new GI elbow 3way 32mm bore (ISI marked) to charpoy GI pipe all as specified in drg & directed by Engr-in-charge. |
| 23 | Removing old and unserviceable parts / components of “ CHAIR TUBULAR OFFICE STEEL WITH / WITHOUT ARMS” and S&F new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-75 (M)(a) Remove the existing unserviceable seat frame and replace the second class HW seat frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per godrej pattern complete. |
| 24 | All as per item No. 23 here-in-before but back of chair CB steel with/without arms. |
| 25 | Remove the existing unserviceable hand rest and replace the second class HW hand rest including black enamel painting. |
| 26 | Replacement of rubber shoe with S&F new hard rubber shoe of superior quality completed as approved and all as shown on drawing. |
| 27 | Removal of complete dents of the pipe to get the surfaces smooth by applying of putty wherever necessary and painting with one coat of spray painting of synthetic enamel paint as approved shade complete all as shown on drawing. |
| 28 | Removing following old and unserviceable parts / components of “VARIOUS TYPES OF CHAIR REVOLVING” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -FD/E6/MAP/01, TP) (a) Removing the existing old foam & tapestry of seat and S&F new seat of chair made of PU Foam of 40 density foam cushion 75 mm duly fixed on hot pressed plywood commercial BWR grade upholstered with tapestry as approved By GE . (Make of cushion :Sleepwell/ kurlon/Godrej interio) |
| 29 | All as per item No. 28 here-in-before but back of chair revolving. |
| 30 | Removing the existing U/S arm and S&F new arm of chair revolving. |
| 31 | Removing the existing U/S castor wheel and S&F new castor wheel. |
| 32 | Replacement of lever system (hydraulic) for adjustment of height including all necessary fitting etc. |
| 33 | Replacement of complete base stand assembly including all necessary fitting etc. |
| 34 | Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-84, 381, 1004, TP) (a) Removing old u/s tops from table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with teak wood beading all around all as specified in drg as directed by Engr-in-charge.(Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 35 | Removing of unserviceable/broken/Damaged/Rusted drawers from existing table office clk steel and S&F new drawers made out 1mm thick MS sheet all as specified in drg & directed by Eng-in-charge. |
| 36 | M&L for removal of existing unserviceable lock of any description in any position, S& F new lock of 6 levers (Make:Godrej/Link/Harrison) with duplicate key including fixing with suitable machine screws complete all as specified and directed by Engineer-in-charge. |
| 37 | Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings. |
| 38 | M&L for two coat of synthetic enamel paint after preparation of old painted surfaces by applying sand paper and filling with putty where ever required all as specified & directed by Engr-in-charge. |
| 39 | Removing following old and unserviceable parts / components of “TABLE OFFICE OFFICER STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-84,1002, 1003, TP) (a) Removing old u/s tops and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with teak wood beading all around all as specified in drg as directed by Engr-in-charge.(Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 40 | All as per item No. 39 here-in-before but drawers of Table Office Offr steel |
| 41 | All as per item No. 39 here-in-before but lock of Table Office Offr steel |
| 42 | Replacement of rubber shoe with S&F new hard rubber shoe of superior quality completed as approved and all as shown on drawing. |
| 43 | M&L for two coat of synthetic enamel paint after preparation of old painted surfaces by applying sand paper and filling with putty where ever required all as specified & directed by Engr-in-charge. |
| 44 | Removing following old and unserviceable parts / components of “LOCKER BED SIDE STEEL” and S&F new parts / components of same size, existing pattern with welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-127, 257, 1029, TP)(a) M&L for removal of existing unserviceable handle, S&F new chromium plated handle 100mm long including fixing with suitable nut/pins as specified and directed by Eng-in-charge. |
| 45 | Removing of old unserviceable Hasp & staple and S&F new Hasp & staple chromium plated all as per drg. |
| 46 | M&L for replacement of existing unserviceable hanging rod and S&F new hanging rod all as per drg. |
| 47 | New legs made out 1mm thick MS sheet bend to shape fix with suitable size rivets and gas welding as reqd all as specified and shown on drg. |
| 48 | New shelves including fixing with suitable screws all as specificed and shown on drg. |
| 49 | Removal of complete dents to get the surfaces smooth by applying of putty wherever necessary and two coat of spray painting in single/dual shade of synthetic enamel paint , colour as approved complete for internal & external surfaces all as directed by Engineer-in-charge. |
| 50 | Removing following old and unserviceable parts / components of “TABLE COMPUTER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03, TP) (a) Removing old u/s tops from Table computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with teak wood beading all around all as specified in drg as directed by Engr-in-charge.(Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 51 | Drawer made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with teak wood beading all around as per manufacturer's instructions and other side french polishing with 02 Nos telescopic channel of best quality as approved by Engr-In-Charge. |
| 52 | Pull out tray for mouse made all as per items ser No 51 of size and specification as per drawing. |
| 53 | Pull out tray for Key Board made all as per items ser No 51 of size and specification as per drawing. |
| 54 | Sides made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with teak wood beading all around as per manufacturer's instructions and other side french polishing as approved by Engr-In-charge. |
| 55 | Removing following old and unserviceable parts / components of “CHAIR CBA WITH SPL WRITING ARMS” and S&F new parts / components of same size, existing pattern and same material and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No: FD-120 (M) (a) Remove the existing unserviceable seat frame and replace the second class HW seat frame polished in teakwood colour and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete. |
| 56 | All as per item No. 55 here-in-before but Back of chair writing. |
| 57 | Remove the existing unserviceable hand rest and replace the second class HW hand rest as per drg. |
| 58 | M&L for spot welding (not exceeding one inch) of steel iron frame and match with the existing frame by grinding of the welding portion as per drg. |
| 59 | Removal of complete dents to get the surfaces smooth by applying of putty wherever necessary and painting with one coat of spray painting of approved shade (synthetic enamel paint) complete for internal & external surfaces all as directed by Engineer-in-charge. |
| 60 | Replacement of rubber shoe with &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings. |
| 61 | Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (a) Removing the existing old foam & tapestry of seat and S &F new seat of chair made of PU Foam of 50 density foam cushion 50 mm duly fixed on hot pressed plywood commercial BWR grade upholstered with tapestry as approved By GE . (Drg No: FD/E6/MAP/12, TP) |
| 62 | All as per item No. 61 here-in-before but Back of chair writing. |
| 63 | All as per item No. 61 here-in-before but Arm of chair writing. |
| 64 | Removal of complete dents to get the surfaces smooth by applying of putty wherever necessary and painting with one coat of spray painting of approved shade (synthetic enamel paint) complete for internal & external surfaces all as directed by Engineer-in-charge. |
| 65 | Replacement of u/s PVC stopper with S&F new PVC stopper of superior quality completed as approved and all as shown on drawings. |
| 66 | Removing following old and unserviceable parts / components of “MS COT DOUBLE TIER HARD TOP” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-GE/TD/28/11,TP)(a) Taking out old unserviciable stiffner and S&F new stiffner of MS angel 03 Nos of size 900mmx25mmx25mmx3mm to be welded incl drilling holes 06 Nos as directed by Engr-in-charge. Before fixing stiffner shall be painted with two coat synthetic enamel black paint complete all as specifed and directed. |
| 67 | Taking out old unserviceable top of plywood and S&F new top of plywood 12 mm thick 7 ply commercial BWR grade ISI Marked complete to be fitted with 06 Nos semi circular nut & bolts to stiffner of charpoy all as directed by Engr-in-charge. Make of ply :Century ply/Archid ply/Green ply/Kit ply |
| 68 | M&L for two coat of synthetic enamel black paint after preparation of old painted surfaces by applying sand paper and filling with putty where ever required all as specified & directed by Engr-in-charge. |
| 69 | Removing following old and unserviceable parts / components of “BED PLYWOOD TOP” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No: FD- 246, 247)(a) Head rest complete of size and specification as per drawing. |
| 70 | Foot rest complete of size and specification as per drawing. |
| 71 | Plywood top with 12 mm thick BWR commercial as per drawing.(Make of ply :Century Ply/Archid ply/Green Ply/Kit Ply) |
| 72 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 73 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 74 | Both side veneered of Head Rest of size and specification as per drawing. |
| 75 | Both side veneered of Foot Rest of size and specification as per drawing. |
| 76 | M&L for preparation of old polished surface of bed plywood top by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 77 | Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-223, 224, 283, 284)(a) Removing of old u/s top of table 3' x 2' and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white face with teak wood beading all around all as specified in drg & directed by Engr-in-charge.(Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 78 | Leg made of first class hard wood (teak wood) of size and specification as per drawing. |
| 79 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 80 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 81 | Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 82 | Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 83 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 84 | M&L for preparation of old polished surface of table 3' x 2' with & without drawer by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 85 | Removing following old and unserviceable parts / components of “TABLE WRITING” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and olishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-249,275)(a) Top made out of 18mm thick pre-laminated particle board with exterior grade (ISI marked) one side teak face & other side white face with teak wood beading all around all as specified in drg & directed by Engr-in-charge.(Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 86 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 87 | Complete drawer made out of 12mm thick plywood of size and specification as per drawing. |
| 88 | Shutters made out of 18mm thick pre-laminated particle board with exterior grade (ISI marked) one side teak face & other side white face with teak wood beading all around all as specified in drg & directed by Engr-in-charge.(Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 89 | Replacement of existing handle anf fixed with handle complete as approved and directed by Engineer-in-charge. |
| 90 | M&L for preparation of old polished surface of table writing by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 91 | Removing following old and unserviceable parts / components of “PEG TABLE” and S&F new parts / components of same size, existing pattern with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No : FD-236, 277,384) (a) Removing old u/s tops from peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white face with teak wood beading all around all as specified in drg as directed by Engr-in-charge.(Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 92 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 93 | Short rail/ short stifffner of first class hard wood (teak wood) of size and specification as per drawing. |
| 94 | Long rail/long stiffner of first class hard wood (teak wood) of size and specification as per drawing. |
| 95 | M&L for preparation of old polished surface of peg table by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 96 | Removing following old and unserviceable parts / components of “TABLE CENTRE” and S & F new parts / components of same size, existing pattern , same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-235, 274)(a) Removing old u/s tops from Table centre and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with teak wood beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 97 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 98 | Short rail/short stiffner of first class hard wood (teak wood) of size and specification as per drawing. |
| 99 | Long rail/long stiffner of first class hard wood (teak wood) of size and specification as per drawing. |
| 100 | M&L for preparation of old polished surface of table centre by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 101 | Removing following old and unserviceable parts / components of “TABLE DINING 06/08 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No: FD-239, 273,FD/MAP-II/03)(a) Removing old u/s tops from Table dining 06 persons and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white face with teak wood beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 102 | Removing old u/s tops from Table dining 08 persons and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white face with teak wood beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 103 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 104 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 105 | Long rail for table dining 06 persons made of first class hard wood (teak wood) of size and specification as per drawing. |
| 106 | Long rail for table dining 08 persons made of first class hard wood (teak wood) of size and specification as per drawing. |
| 107 | M&L for preparation of old polished surface of table dining 06 person by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 108 | M&L for preparation of old polished surface of table dining 08 person by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 109 | S&F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail veries type of wooden table (Table dining 6/8, table writing, Table 3'x2', Bed plywood top) fixed with 2 Nos screw and duly polishing to match with existing complete as direction by Engr-in-charge. |
| 110 | S&F PVC shoe to the bottom of legs of Table 3'x2' ,table writing , table peg, table centre, teapoy, table dining 06/08 person,chair dining , chair easy, chair writing etc as per drg. |
| 111 | Removing following old and unserviceable parts / components of “TABLE DRESSING GENTS WITH MIRROR” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD 230,379)(a) 5 mm thick Looking Mirror with 06 mm thick plywood at the back with complete frame of first class hard wood for mirror and specification as per drawing.(Make of mirror : Modigaurd/Swastik/Saint gobin)Make of ply :Century ply/Archid ply/Green ply/Kit ply |
| 112 | Lower wooden box complete made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) and one side french polishing, 6 mm thick back plywood & knob 40mm dia complete all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 113 | M&L for preparation of old polished surface of table dressing gents with mirror by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 114 | Removing following old and unserviceable parts / components of “TEAPOY WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-232, 278,382)(a) Removing old u/s tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white face with teak wood beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Eco board/Archid lam) |
| 115 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 116 | Short rail/short stiffner of first class hard wood (teak wood) of size and specification as per drawing. |
| 117 | Long rail/long stiffner of first class hard wood (teak wood) of size and specification as per drawing. |
| 118 | M&L for preparation of old polished surface of teapoy wooden by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 119 | Removing following old and unserviceable parts / components of “SOFA 05 SEATER” and S & F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-281,373, 1113, FD/MAP-II/02)(a) Arms made out of teakwood of size and specification as per drawing. |
| 120 | Front leg made out of teakwood of size and specification as per drawing. |
| 121 | Rear leg made out of teakwood of size and specification as per drawing. |
| 122 | Batten for seat and back made out of teak wood of size and specification as per drawing. |
| 123 | S&F for cushion foam of 40 density with fabric cushion cover for seat and back of SOFA SET 05 seater, Superior quality of foam & cover tepesty cloth approved by GE not less than 340/- per R/Mtrs. (Drg No FD-281,373, 1113, FD/MAP-II/02) . (Make of cushion :Sleepwell/ kurlon/Godrej interio) |
| 124 | M&L for preparation of old polished surface of sofa set 05 seater by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 125 | Removing following old and unserviceable parts / components of “CHAIR EASY” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-201,229)(a) Front / rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 126 | Arm rest made of first class hard wood (teak wood) of size and specification as per drawing. |
| 127 | Seat front / rear / side rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 128 | Back upper / bottom rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 129 | M&L for preparation of old polished surface of chair easy by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 130 | Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No : FD-228,279)(a) Front legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 131 | Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 132 | Front/ rear / side rail of seat made of first class hard wood (teak wood) of size and specification as per drawing. |
| 133 | Stiffner of back made of first class hard wood (teak wood) of size and specification as per drawing. |
| 134 | Short & long stiffener of bottom made of first class hard wood (teak wood) of size and specification as per drawing. |
| 135 | M&L for preparation of old polished surface of chair dining by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 136 | Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-250, 280)(a) Front legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 137 | Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 138 | Front/ rear /side rail of seat made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 139 | Stiffner of back made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 140 | Short & long stiffner of bottom made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 141 | M&L for preparation of old polished surface of chair writing by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of french polish to match with existing polish as directed by the Engineer-in-charge. |
| 142 | M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge. |
| 143 | Table dressing gents with mirror (FD-230) : Overall size shall be all as shown on drg. 25x19 mm teakwood frame shall be provided all around of mirror. The entire box shall be made of 18mm thick pre-laminated particle board exterior grade (ISI marked) . Bottom of the drawers shall be of 6mm thick commercial BWR grade plywood .The back shall be of 6mm thick commercial BWR grade plywood. 5 mm thick mirror (Make: Modigaurd/ Swastik/Saint gobin) distortion free shall be provided as per drg.Polish & Finish:-All wood surface exposed to view when placed in position shall be Melamine polished with high gloss finish. Rest all as per drgs and as directed by Engr-in-Charge. |
| 144 | Locker bedside steel (FD-1029) :Overall size shall be all as shown on drawing. Locker shall be made of mild steel sheet of 20 gauge. 20 mm dia conduit pipe shall be chrome plated with wall thickness of 1.6 mm shall be fixed with side sockets.One chromium plated steel handle of size 120mm long and not less than 50 mm wide with duplicate keys shall be provided. The locking device shall be a three way locking device with proper workmanship. All joints and welding, fixing shall be done according standard workmanship.Make of Lock :- Link/Godrej/Harrison.Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated in dual shade (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. |
| 145 | Almirah large steel (FD-1031) :- Overall size shall be all as shown on drawing. It shall be made of 20 gauge thick mild steel sheet. The almirah shall have four shelves equally spaced five compartments. The almirah shall have one normal handle 120 mm long having three way locking system with proper workmanship. All joints and welding, fixing shall be done according standard workmanship.Rest all as per drg.Make of Lock :- Link/Godrej/Harrison.Finish & Paint :- All steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by GE) in seven stages tank process. The test certificate for powder coating is to be submitted through NABL accredited Lab. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender