Tender For Notice Inviting Tender For The Contract For Construction Of New Office Building (G+02 Storey) At Etp At Rcf Thal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Aug 2026
18 days left
EMD
3 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Notice Inviting Tender For The Contract For Construction Of New Office Building (G+02 Storey) At Etp At Rcf Thal
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5m to 3.0 m) by Mechanical Means.. |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.50 m) by Mechanical Means.. |
| 3 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m) by Mechanical Means. |
| 4 | Providing dry trap rubble stone soling 15cm to 20cm thick including hand packing and compacting complete. |
| 5 | Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etc. complete. Spec. No. : Bd.A. 11/Page No. 262 |
| 6 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-15 of trap/ granite/ quartzite/ gneiss metal for steps including steel centering, plywood/steel formwork, laying/ pumping, compacting, roughening them ifspecial finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), Drum Type mixer/concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). |
| 7 | Providing and laying in situ/ Ready Mix cement concrete M-30 of trap/ granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). |
| 8 | Providing and laying cast in situ/ Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). |
| 9 | Providing and laying Cast in situ/ Ready Mix cement concrete M-30 of trap/ granite/quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). |
| 10 | Providing and laying Cast in situ/ Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). |
| 11 | Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 12 | Providing first class Burnt Brick masonry with conventional /I. S. type bricks in cement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering complete. |
| 13 | Providing internal/ external 12 mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988 and IS 383-1970 in a single coat using cement mortar of proportion 1:4 containing special type of polymer additives about 0.4 percent, to all type of surfaces in all positions including scaffolding and curing complete. |
| 14 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 15 | Providing at all heights 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) to ceiling, etc., as directed, including necessary scaffolding, curing etc. complete. |
| 16 | Providing and applying 8 to 10 mm thick POP wall punning as required to internal walls including scrapping of existing paint or on new surfaces with line & level to make surface smooth. |
| 17 | Providing and applying priming coat over concrete/Masonry/Asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, greese, dirt and other foreign matter and sand papering as required etc. complete. |
| 18 | Providing and applying interior wall finish luster of Asian/ Berger/ Nerolac/ Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian/ Berger/ Nerolac/ Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian/ Berger/ Nerolac/ Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian/ Berger/ Nerolac/ Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian/ Berger/ Nerolac/ Dulux Paints or equivalent interior wall finish luster 1st coat with brush/ rubber/ spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours |
| 19 | Providing and applying two coats of exterior acraylic emulsion paint conforming to corresponding I.S.of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days etc. complete. |
| 20 | Providing and laying vitrified mirror/ glossy finish tiles for Flooring of decorative type having size 590 mm. to 605 mm. x 590 mm. to 605 mm. of 8 to 10 mm. thickness and confirming to I.S. 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 21 | Providing and laying vitrified mirror / glossy finish tiles for Skirting having size 590 mm to 605 mm. x 590 mm. to 605 mm. of 8 to 10 mm. thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 22 | Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 mm. to 20 mm. thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning etc. complete. |
| 23 | Providing 25 millimeter to 30 millimeter thick partition of both side polished black Kadappa stone slab of approved quality including giving required size and shape etc. fixing in cement mortar 1:3 curing and cement complete. |
| 24 | Waterproofing Treatment to new terrace by using Polymeric Cementitious Membrane as approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having anon- toxic, 2-(methoxycarbonyl)-1-propene- Butyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112 mm average thicknes of brick bat coba in cement mortar 1:5 over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50Kilogrambag of cement and finishing with 20 |
| 25 | Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing and filling joints of Nahani trap and any outlet by properly etc. complete. |
| 26 | Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35 mm thick as per detailed drawing consisting panelled vertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and panels 12 mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at juncations of panel inserts and as instructed by the Engieer in chagre including three coats of oil painting etc. complete. |
| 27 | Providing and fixing country cut teak wood single leaf pannelled door shutter without fanlight 35 mm. thick as per drawing consisting of T.W. top rail size 100 mm x 35 mm and bottom rail and lock rail 200 mm x 35 mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally conforming to I.S. 3097) excluding frame, including stainless steel fixtures and fastening and fastening and T.W. beading to junctions of pannelled inserts and as instructed by Engineer in charge including three coats of oil painting etc. complete. |
| 28 | Providing and Fixing 30 MM thick both side Prelaminated Solid Panel P.V.C. Door Shutter consisting of frame made out of M.S. tubes of 19 guage thickness and, size 19 x 19 mm. for styles and 15 x15 mm. for the top and bottom rails, M.S. frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC ' C ' channel made from 5 mm. (+/- 0.25) thick prelaminated sheet of density 600 kg/cbm, of size 30 mm. thickness 70 mm. width out of which 50 mm. shall be flat and 20 mm shall be tapered in 45 degree angle on either side forming stiles and 5 mm. thick, 95 mm. wide P.V.C. sheet out of which 75 mm. shall be falt and 20 mm. shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm. wide P.V.C. sheet out of which 75 mm. shall be falt and 20 mm. shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/- 0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/- 0.25) thick P.V.C. sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm. |
| 29 | Providing and fixing in position (as per 1868:1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm. at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm. at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm. at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm. at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm. at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm. at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm. thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete with colour Anodising with box. |
| 30 | Providing and fixing in position (as per I.S.1868: 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm. at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm. at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm. at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm. at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm. at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm. at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm. at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm. thick plain glass with all required screws and nuts etc, complete with colour Anodising with box. |
| 31 | Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 32 | Providing and fixing mild steel grill work for windows, ventilators, etc.15 kg/sq.m as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 33 | Providing and laying in trenches 40 milimetre diameter CPVC pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary as directed etc. complete. |
| 34 | Providing and laying in trenches 20 milimetre diameter CPVC pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary as directed etc. complete. |
| 35 | Providing and fixing 40 milimetre. Diameter Ball cock medium type with Poly Venyl Chloride float including sockets and necessary fittings and tested as per municipal requirements complete. |
| 36 | Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall, 100 mm diameter G.I. plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete. |
| 37 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 litre capacity with fittings, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall. |
| 38 | Providing and fixing white glazed earthenware Wash Hand Basin of 45 cm. x 30 cm. size including cold water piller tap/cold and hot water piller tap brackets, rubber plugs and brass chain,stop tap and necessary pipe connections including P.V.C. waste pipe and trap upto the outside face of the wall. |
| 39 | Providing and fixing 10 centimeter PVC nahani trap with grating etc. complete. |
| 40 | Providing & constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. cover medium duty 140 kilogram with frame etc. complete. |
| 41 | Providing and fixing hume pipe septic tank 900 mm diameter with vent pipe and cap including necessary (excluding excavation and laying). |
| 42 | Providing and fixing 450 mm.x550 mm. size superior type Belgium mirror with 16 mm diameter nickel plated towel rod etc. complete. |
| 43 | Providing and fixing 20 mm diameter screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 44 | Providing and fixing C.P. Angular stop cock with wall flange of approved make including necessary sockets/ union nut etc. complete. |
| 45 | Providing and fixing C.P. sink cock with raised 'J' shaped swinging casted spout of approved make including necessary sockets/union nut etc. complete. |
| 46 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. |
| 47 | Providing and fixing 40 mm diameter and 1.5 mm thick stainless steel hand railing in S.S. 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete. |
| 48 | Metal Framed Suspended Ceiling (Seamless): Main System:Metal Framed Suspended Ceiling Comprises Of G.I Perimeter Channel Having 0.55mm Thickness, Two Unequal Flanges Of 20 And 30mm And Web Of 27mm Is Fixed To Surrounding Walls / Partition Using Nylon Sleeves And Screws At 450mm Centers. Then Intermediate Channel (0.91mm Thick) Having Two Equal Flanges Of 15 Mm. Each And A Web Of 45mm Is Suspended From The Soffit At 1220 Mm Center With Ceiling Angle Of Width 25mm X 10 Mm X 0.55 Mm Thick, Fixed To Soffit At 1220mm Centre With G.I Cleat And Steel Expansion Fasteners. Ceiling Section Of 0.55mm Thickness Having Knurled Web Of 50.5 Mm And Flanges Of 26mm Each With Lips Of 10.5mm Are Then Fixed To The Intermediate Channel With Connecting Clips Across To The Intermediate Channel, At 457mm Centers. 8mm Thick Square/Tapered Edge Hilux Boards Or Equivalent Are Then Screw Fixed Across The Ceiling Sections With 25mm Long Self Drilling & Tapping Screws Having Phillips Head With Under Head Cutter, For First And Second Layer Respectively, At 200mm Centers. Jointing And Finishing:The Joints Of The Face Boards Are Finished With Specially Formulated Jointing Compound And 48mm Wide Fiber Tape To Provide Seamless Finish. Cement Primer (Oil Based) To Be Provided On Entire Surface Before Putty/ Painting.Note: G.I. Perimeter Channel And Supporting Materials Are To Be Provided To Make Any Opening For Light Fittings, Diffusers Etc. And Should Be Supported Properly To Maintain The Integrity Of The Ceiling, And Should Be Charged Extra. |
| 49 | Providing & Fixing Of Aluminum Lay In Micro Perforated Of Armstrong Or Equivalent Make (1.8mm Diameter-20% Open Area) Metal Ceiling Consisting Of 600 x 600mm Lay In Tiles In 0.7 Mm Thick Aluminum Pre Coated To Global White Color With Acoustical Fleece Hot Pressed On The Back Of The Perforated Tile & 50 Mm Thk. Resin Bonded Glass Wool Backing To Be Laid On Armstrong Grid Systems With 24mm Wide T - Section Flanges Color White Having Rotary Stitching On The Main Runner, 1200 mm & 600 mm Cross Tees. The Tiles Would Have NRC Of 0.50, Fire Performance Of Class A2-S1.D0 As Per En13501 Standard In Module Size Of 600 X 600mm, Suitable For Green Building Application, With Recycled Content Of 50%. The Tile Shall Be Laid On 24 Mm Wide T - Section Flanges Colour White Having Rotary Stitching On All T Sections I.E. The Main Runner, 1200 Mm & 600 Mm Cross Tees With A Web Height Of 38mm And A Load Carrying Capacity Of 15.34kgs/M2& Pull Out Strength Of 100kgs. The T Sections Have A Galvanizing Of 90 Grams Per M2 And Need To Be Installed With Suspension System. |
| 50 | Full Height Partition: Providing & Fixing a Non-Load Bearing, 74mm Thick Metal Framed Partition With 1hour Fire Rating and Sound Insulation of 41 Decibel. Main System: 74mm Thick Metal Stud Partition Comprising Of A 100mm Wide X 12mm Thick Hilux Board Or Equivalent Fillets (Strips) Screw Fixed With 25mm Self Tapping Screws At 200mm Centres To Both Sides Of A Composite Framework Which Includes A 48mm Stud Of 0.55mm Thick And Having Two Unequal Flanges Of 48and 50mm Each Placed At 610mm Center To Center In 50mm Floor And Ceiling Channel With Two Equal Flanges Of 32mm Each Fixed To Floor And Ceiling At 600mm Center, With The Help Of Nylon Sleeves And Wood Screws. 12mm Thick Hilux Boards or Equivalent Are Then Screw Fixed By 35mm Long Self Drilling and Tapping Screws Having Phillips Head With Under Head Cutter, To the Studs and Channels on Both Sides of the Frame Work. The Board’s Joints Are to Be Staggered to Avoid through Passage. Insulation: 50mm Thick (Density-48kg/M3) Mineral Wool Or Rockwool As Directed Is To Be Placed In The Cavity Of The Partition. Jointing And Finishing: Finally Edges Of The Facing Boards Are To Be Jointed And Finished So As To Have A Seamless Finish Which Includes Filling And Finishing With Specially Formulated Jointing Compound And Self-Adhesive Fibre Tape. Cement Primer (Oil Based) To Be Provided On Entire Surface Before Putty/ Painting. Note: A Horizontal Bracing Channel Is To Be Provided If The Partition Height Exceeds The Board Length To Provide Edge Support To The Board. The Necessary Opening Shall Be Provided In the Partition for Electrical/Telephone Conduits & Outlets as Per Design/Instructions. |
| 51 | Full Height Partition Partly Glazed: Same As Full Height Partition Item With Partition With Partly Glazed 8mm Thick Clear Glass With BTC Beading Patties Finished With Polish/Paint As Per Matching Shade Laminate As Per Design/Instructions. Rate Is Including Extra Framework For Fixing Of Glass And No Deduction For Glass Area Shall Be Made For Partition Area Measurement. |
| 52 | Low Height Partition For Cubical : Same As Full Height Partition Item With Partition Provided With 3-1/2\\" Wide X1\\" Thk Moulding Patti In B.T.C On Edges And The Same Shall Be Finished With Matching Polish With 10mm Thk Edge Polished Clear Glass Fixed Over Within Beading Patti 1\\" Deep As Directed. (Rate Is Excluding Glass) |
| 53 | Stability Certification of the Newly Constructed Office, as per RCF Performa and Submission of as Build Drawings after Completion of Construction. |
| 54 | Providing & Fixing In Position Misc. Materials Not Covered In The Schedule Of Rates Mentioned Above Including Transporting, Loading, Unloading At Site Etc. (Cash Receipt To Be Submitted). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender