Tender For Construction Work For Smooth Movement Of Traffic At Talab Intersection (Police Station Side).
Tender Value
1.39 Crore
Estimated cost
Bid Submission
01 Aug 2026
9 days left
EMD
2.78 Lakhs
Bank guarantee accepted
Document Fee
16520
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work For Smooth Movement Of Traffic At Talab Intersection (Police Station Side).
BOQ
| Sl. No. | Item Description |
| 1 | excavation in soil mixed with moorum in foundation Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth by Hydraulic excavator/ manual means. as pwd si.no. 252 |
| 2 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Chargewithin a distance of 60 meters (200 feet). Sor 692 |
| 3 | Sand filling in plinth including supply of necessary quantity of sand from any distance at site of work and including water dressing etc required proper completion of work PWD S.I.No. 255 |
| 4 | Providing and laying of cement concrete in foundation including supply of all materials ,labours and T&Petc required for proper completion of the work 1:4:8 (1 Cement : 4 Coarse sand: 8 Graded stone aggregate 40 mm nominal size) .(SOR -275a) |
| 5 | Providing and laying in position specified grade of reinforcement cement concrete including the cost of centering, shuttering finishing and excluding reinforcement including supply pf all materials ,labours and T&Petc required for proper completion of the work 1:1.5:3 (1 Cement : 1.5 Coarse sand: 3 Graded stone aggregate 20 mm nominal size) .(SOR -5.1.2a) |
| 6 | Steel reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete TMT bar as DSR no.- 5.22.6 |
| 7 | Providing and laying cement concrete in 4:2:1 of not less than strength of M-15 stone Ballast (20mm nominal size) approved coarse sand and cement, curing complete, including cost of form work. In Foundation and floors. S.I.No. 279 Page No. 28 |
| 8 | Dewatering of nala water between two bandha by 5 HP diesel pump incl. hire charges and its fuel etc. as irrigation sor item no. 10a |
| 9 | Disposal of surplus excavated earth rubbish, Malba etc. by mechenical transport complete as per direction of E/I up to any lead and lift.S.I.No. 10 new |
| 10 | Steel wok in built up tubular (round,square or rectangular hollow tubes etc.) truses etc. including cutting. Hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Hot finised welded type tubes. as DSR no. 10.16.1 |
| 11 | Painting on Steel/G.S. sheet with synthetic enamel paint .as DSR no. 13.53.1 |
| 12 | Pigment for nala cover |
| 13 | Dismantling of B.O.E soling/Inter locking tiles Including Stacking of serviceable material and disposal of unserviceable materials within a lead of 50m as per direction of EI/C (Labour only) S.I.No. 19 new |
| 14 | Shifting of statue |
| 15 | Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing thesurface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30 mtr. distance as directed by the Engineer-in-Charge. S.I.No.253 |
| 16 | M-100 Brick work in 1:4 (One cement & Four Coarse sand) mortar i/c all material labour T&P etc. complete. DSR Sp No. 6.1.1 Ch. 6 |
| 17 | 12mm thick Plaster in 1:4 (One cement & four coarse sand sand) mortar i/c all material labour T&P etc. complete.S.I.No. 584 |
| 18 | Construction of gravel/soil aggregate base by providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel 80-100 KN static roller to achieve the desired density, complete as per Technical Specification Clause 402 |
| 19 | WBM Grading -3 -Providing laying , spreding and compacting stone aggregate of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness ,hand packing . Rolling with smooth whell roller 80-100 kn in stage to proper grade and camber ,applying and brooming ,stone screening to fill up the interstices of coarse aggregate ,watering and compacting to required density as per technical specification Clause 405. |
| 20 | Providing and laying Interlocking C.C. Tiles 100mm thick of approved quality over 25mm thick local sand. (Rubber Moulded). |
| 21 | CEMENT CONCRETE PAVEMENT (C.C ROAD) construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS 383 maximun size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side from work (steel channel laying and fixing of 125 micron thick plastic sheet, wedges steel plates including levelling the form work as per drawing) spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous opration including provision of contraction and expansion construction joints applying debonding strips primer, sealant admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. |
| 22 | Road marking with Hot applied thermoplastic compond with reflectoristising Glass beads on bituminous surface .Providing and laying of hot applid thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per Sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35-2015 the finished surface to be level, Uniform and free from streaks and holes .MORTH 803 PWS. SOR SI NO 2 |
| 23 | Disposal of old tiles from site |
| 24 | P/F of inaguration signboard with brick work and Plaster in 1:4 Cement mortar with black granite stone including engraving of proper language all complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender