Tender For Upgradation Of Road At Friends Colony To House Of Prahlad Singh Bwo Wet Mix, 50Mm Bm, 25Mm Sd And Seal Coat. (Adv. Cost Rs.11.00 Lacs)
Tender Value
11 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
16 days left
EMD
22000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Road At Friends Colony To House Of Prahlad Singh Bwo Wet Mix, 50Mm Bm, 25Mm Sd And Seal Coat. (Adv. Cost Rs.11.00 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Taking out of GEOTAGGED photographs of size 150mm x 100mm at site before execution of work, during execution and after completion of work including submitting the same to the engineer incharge. |
| 2 | Preparation of sub grade by excavating earth to an average of 22.5cm depth, dressing to camber and consolidation with road roller 8-12 tonne capacity including making good the undulation etc. with earth or quarry spoils etc. and disposal of surplus material upto dumping site as directed by engineer incharge including all costs and carriages complete. |
| 3 | Providing and laying of Nallahmuck/ khak bajri including sorting, spreading to template, watering, dressing, ramming and consolidating with (80-100) KN road roller all inclusive leads, lifts, loading, unloading, head load (if any) and carriage of materials from nearest approved source to site of work complete. |
| 4 | Providing, Laying, Spreading & Compacting graded stone aggregate (size range 53mm to 0.075mm) to wet mix macadam (WMM) specifications including mixing the material with water at OMC mechanical mixer plant carriage of mixed material by Tipper at site with all leads and lifts laying in uniform layers in sub base/ base course on a well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density complete as per technical specification of clause 406.(75mm thick compacted). |
| 5 | Providing and applying tack coat using hot straight run bitumen of VG 10 grade including heating the bitumen and spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface to remove all dirt, dust, mud etc and finally brooming the surface as per required specification. (Including cost & carriage of all materials involved upto site of work complete). |
| 6 | On WBM surface using tar @0.75kg/sqm. |
| 7 | Providing/ laying 50mm thick compacted bituminousmacadam base course with stone aggregate of quality, size and grading as per specified in most specification and straight run bitumen of VG 10 @ 3.3% by weight of total mix including hot mixing of stone aggrt. and bitumen in hot mix plant transporting and laying mixed material with paver finisher to the required level and grade. rolling with road roller of 8 to 10 ton capacity to achieve the required compaction and density (including cost & carriage of all materials involved upto site of work complete). |
| 8 | Providing/ laying 25mm thick semidense Bituminous concrete using material agg. satisfying the gradation set out in most specification with 5% binder content (by way of total mix) bitumen VG 10 @2.88 kgs/ sqm with the aid of hot mix plant and paver finisher including rolling with 8 to 10 ton capacity road roller to achieve the required compaction and density with 8/100 including rolling and finishing complete including cost and carriage of material involved. |
| 9 | Providing/ laying 6mm thick seal coat premix fine agg. (Passing 2.36mm and retained on 180 micronsieve) with bitumen 128 kg of grade 80/100 bitumen per cum of fine agg. (0.768kg of bitumen per sqm) and 0.60 cum of fine agg. per 100 sqm of road surface including rolling and finishing complete as per most specification (including cost and carriage of all materials involved upto the site of work) |
| 10 | Providing and laying stone soling duly hand packed in trenches including proper ramming etc. with all costs and carriages complete. |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including all leads, lifts, loading, unloading costs and carriages complete. |
| 12 | P/L, in position reinforcement cement concrete of specified grade excluding the cost of centering & shuttering. All work up to plinth level in grade 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate of 20 mm Nominal size (Crushed) all inclusive leads, lifts, loading, unloading, head load (if any) costs and carriages complete. |
| 13 | Centering & Shuttering including strutting propping etc. and removal form work for foundation, footings bases of columns blocks etc. complete. |
| 14 | Steel Reinforcement for RCC works including straightening, cutting, bending placing in position and binding including all costs and carriages complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
TodayJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender