Tender For Creation Of 02 No Lecture Halls In The Stilt Floor Of Ipd Block At Skims Mch Bemina (Mechanical Component- Supply Installation Testing and Commissioning of Vrv/Vrf System) Work At Serial No 01
Tender Value
61.80 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
7 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Creation Of 02 No Lecture Halls In The Stilt Floor Of Ipd Block At Skims Mch Bemina (Mechanical Component- Supply Installation Testing and Commissioning of Vrv/Vrf System) Work At Serial No 01
BOQ
| Sl. No. | Item Description |
| 1 | VRV/ VRF Outdoor Units as per the Techncial Specifications of Annexure A |
| 2 | Outdoor Unit- 32HP (Hot And Cold) Top Discharge |
| 3 | VRV/ VRF Indoor Units as per the Techncial Specifications of Annexure A |
| 4 | 4.1 TR |
| 5 | Copper Refrigerant Piping alongwith insulation as per the Techncial Specifications of Annexure A |
| 6 | 9.5 mm dia (OD) with 13mm thick insulation |
| 7 | 15.88 mm dia (OD) with 13mm thick insulation |
| 8 | 19 mm dia (OD) with 13mm thick insulation |
| 9 | 22.2 mm dia (OD) with 19mm thick insulation |
| 10 | 28.58 mm dia (OD) with 19mm thick insulation |
| 11 | 31.8 mm dia (OD) with 19mm thick insulation |
| 12 | 34.9 mm dia (OD) with 19mm thick insulation |
| 13 | Supply, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same Original Equipment Manufacturer (OEM) make as of ODUs and IDUsIndoor/ Out door Multi Joints |
| 14 | Interconnecting Power/Control CablesProviding and laying of Power/Control Cables/communication wire of Copper conductor, XLPE Insulated conforming to IS 7098 in PVC Conduits between indoor and outdoor units, distribution board to indoor unit, machine control panel to machine, main panel to sub panel of the following sizes as required. |
| 15 | 3core x 1.5 sqmm copper |
| 16 | 4core x 35 sqmm Armoured copper |
| 17 | DSITC of Electrical Control Panel for VRV/ VRF System as per Technical Specfications of Annexure A |
| 18 | Chemical Earthing as per Techncial Specifications of Annexure A |
| 19 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : |
| 20 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 21 | Supply, installation, balancing and commissioning of factory fabricated/ site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.0.8 MM (22 gauge) Galvanized Sheet Steel Ducting |
| 22 | GI Cable TraySupplying and installing following size of perforated Hot Dipped Galvanised Iron Cable Tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from ceiling with GI suspenders including GI Bolts & nuts, etc. as required |
| 23 | 150 mm width x 50mm depth x 1.6mm thickness |
| 24 | Providing and fitting of 40mm dia ISI Marked medium class PVC Conduit duly insulated for condensate drain line. The job includes providing and fitting of necessary bends, tees, clamps, washers, collars/socket, unions, other required accessories etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
TodayJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender