Tender For Provision Of Concertina Fencing Over The Boundary Wall Extending From Piyala Gate To The Wet Ash Disposal Lines, Including A Part Chain-Link Fencing [Job No. 961 /Dpps]
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Jul 2026
4 days left
EMD
47900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Concertina Fencing Over The Boundary Wall Extending From Piyala Gate To The Wet Ash Disposal Lines, Including A Part Chain-Link Fencing [Job No. 961 /Dpps]
BOQ
| Sl. No. | Item Description |
| 1 | Supplying fitting and fixing 600 mm (±30mm) dia. meter R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx. 6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.) (The rate is exclusive of the cost of posts). |
| 2 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rates includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental charges such as electricity charges, labour insurance charges etc. II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m. [M.S structural member to be supplied by the agency]. |
| 3 | Labour for taking out (from fencing) line of wire (galvanised, strand or barbed) including the cost of taking out staples (by cutting or otherwise, as necessary). (Payment to be made on the length of the wire taken out). |
| 4 | Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75m. Including stacking of steel bars. (a) In ground floor including roof. |
| 5 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety. |
| 7 | Hire and labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (up to roof of ground floor).(f) 25 mm to 30 mm shuttering without staging in foundation Engineer-In-Charge. |
| 8 | Making one set of scaffolding only for painting and other repairing works for external works only with 10 cm. dia. bamboo as main posts at the rate of 1 meter center to center and 7.5 cm. dia. bamboo ties @ 0.75 meter apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in-charge.(b) Up to 3.9 meter height. |
| 9 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 10 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface: With super gloss (hi-gloss) iv) Two coats (with any shade except white). |
| 11 | Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 12 | Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc. complete as directed. (a) From 1st floor level. |
| 13 | Loading, unloading and stacking by Manual Means.A. Loading in to trucks at the lifting point, unloading at destination, stacking properly in go downs or yard etc. as directed including carriage by head load up to a lead of 50.00 m at each of the two points.(h) Steel. |
| 14 | Carriage of Steel materials over pucca road. Up to 5 KM. |
| 15 | Engagement of Excavator (JCB) for Land development works including cutting of wild trees, leveling, dressing, scraping of existing road surface, dismantling of brick drain etc. as per direction of EIC. |
| 16 | Cutting of jungles/wild growths by Brush cutters/manually including cutting grass, jungles, shrubs, plants up to 10 cm dia. and trimming of branches up to boundary wall height for clear view of the walls as directed. Cutting must be done at the top surface of the ground, i.e. maximum of 5cm from the ground level. The cut refuse must be collected and disposed- off at suitable locations as directed. The cost includes all charges for bush cutters, labour, fuel and maintenance charges of bush cutter, collection, transportation and disposal of the refuse. All cutting and disposal charges are included in the scope and unless the contractor removes the cut refuse within stipulated period, no payment will be made for the work may be stopped and the Deptt. will not be held responsible for stoppage of work and idle labour/ machinery on this issue. |
| 17 | Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised \\"C\\" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc. (The rate is exclusive of the cost of posts) (IV) 75 mm. x 75 mm. x 8 g. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender