Tender For Dismantling & Shifting Of Electrical Items From Old Bldg. To New Bldg. In Other Premises & Providing Necessary Electrical Infrastructure At New Bldg. At T.E Bhogaon, Oa Mainpuri.
Tender Value
3.25 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
0 days left
EMD
6505
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mainpuri → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dismantling & Shifting Of Electrical Items From Old Bldg. To New Bldg. In Other Premises & Providing Necessary Electrical Infrastructure At New Bldg. At T.E Bhogaon, Oa Mainpuri.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling / Disconnection of existing LT Panel, changeover switch and 40 KVA DEA Set Open type/ silent canopy i/c control panel with Power and control cable , Silencer and exhaust pipe , diesel tank , and associated fuel line and all other electrical accessories etc i/c placing the same in same bldg/ loading vehicle as per direction of Eng-In-charge i/c making good the damage etc. as reqd. |
| 2 | Shifting & transportation of existing 40 KVA dismantled DG Set i/c all accessories i/c loading with Crane /hydra/chain pully and safe transportation from Old Bldg. to New Bldg. Room at Bhogaon, Agra i/c unloading with Crane /chain pully on existing CC Foundation /space as per direction of Eng-In-charge at new location etc etc. as required. |
| 3 | Installation, testing , commissioning of 40 KVA DEA set on existing foundation/surface with all accessories like Cubical type manual /AMF control panel i/c fixing of Silencer ,exhaust pipe , fuel tank , fuel line connections, control wiring from panel to engine i/c cutting, jointing, welding of flanges (if reqd) , nuts, bolts , i/c loading and assembling ,fixing the the DG Set i/c making good the damage etc. i/c One hour testing of DG set on exchange load etc as required. |
| 4 | Providing & Making of General Servicing of the 40 KVA E/A set, KOEL make i/c replacement of Lube oil, lube oil filter and diesel filter and cleaning of all parts of DG set like fuel line ,cooling system ,checking of all DG control wiring ,belt and drives for proper working as per manufacturer recommendations complete i/c Fare and labour charge i/c complete as reqd. - Note: (1) 1. Diesel for initial testing of DG set will be arranged by the contractor 2. The recovered black oil shall be given to contractor) |
| 5 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. a) Group A |
| 6 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 7 | b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 8 | c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 9 | d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 10 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 11 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 12 | Supplying & Laying of 4 x 16 Sqmm PVC insulated PVC sheathed Al. Conductor armoured power cable of 1.1 KV grade on surface / wall etc. complete as required. |
| 13 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required |
| 14 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade upto 35 Sqmm size on wall surface as required. |
| 15 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade upto 35 Sqmm size in the existing masonry open duct as required. |
| 16 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 X 16 sq. mm (32 mm) |
| 17 | Providing of P.C.C foundation for 1 : 2 : 4 Cement concrete ration (1 Cement : 2 Coarse sand : 4 graded stone aggtt.) 25 mm nominal size and making suitable for required size i/c plastering centering and shuttering and angle Iron of 40 mm x 40mm x 5mm thick around the edge of foundation etc. Complete as required. |
| 18 | Supplying and fixing of 63 Amp, 415 Volt TPN Switch Disconnector Fuse Unit with sheet steel enclosure, HRC fuses and all accessories i/c connection etc. complete as required. (M/s L&T make FN-63 or SS make) |
| 19 | Supplying & fixing of following LED lights suitable for single phase, 230 Volts AC supply connection etc. complete as required. a) 30 Watt 1200 mm LED tube light fitting (Philips/Bajaj/Crompton Make) |
| 20 | b) Brass batten holder |
| 21 | c) 12 Watt LED Bulb |
| 22 | Supply, Installation, Testing and Commissioning of 1200 mm ceiling fan, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, copper winding, i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. (M/s Crompton HSRiviera 48 1S/SS make) |
| 23 | Supplying and Installation of 300 mm, 1400 RPM Domestic Metal Exhaust Fan, suitable for operation on 230 volts 50 Hz A.C supply and installation in the existing opening including making good the damage, connection, testing, commissioning etc. as required. (M/s Crompton TRANS AIR / SS make) |
| 24 | Supplying and fixing of following way distribution board made of sheet steel on surface / recess having IP-42 & 43 protection double metal door Complete with all standard accessories, Inter connection i/c painting earthing etc. complete as required. (a) 4 Way TPN DB (M/s Legrand Cat No. 5076 70 make or SS make) |
| 25 | Supplying and fixing of following rating MCBs / Isolators in the existing MCB DBs Complete with connections, testing and commissioning etc. complete as required. (a) 6-32 Amp SP MCB (M/s Legrand make or SS make) |
| 26 | b) 63 Amp Four Pole MCB |
| 27 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. |
| 28 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 29 | Supplying & Fixing of Powder coated Free Cooling unit made out of 18 gauge M.S Sheet box with locking door in front & Jali in back side i/c Supplying & Fixing 300 mm sweep Heavy Duty Exhaust Fan 1400 rpm suitable for 230V 50 HZ AC supply i/c making opening in brick wall / window for fixing of unit, connection, testing etc. complete as reqd. (Exhaust fan Make - Crompton / Havells / Bajaj or SS make) (a) Out door unit (For Exhaust of Hot Air) |
| 30 | Supplying & Fixing of Timer unit constituting of 01 No. Digital type thermostat / Temp Controller with LED display & sensor with lead and 01 No. Analog Time Switch / Electronic timer (1 second to 10 hrs.) in suitable size MS box with hinged door, connection etc. as required. (Timer make BCH/L&T/GIC-J648B1 & Analog Time Switch make- SELEC-TC513/TC533BX or Similar superior make) Note: Time will run Exhaust fan for 2 hrs and keep in off position for 15 minutes. |
| 31 | Supplying & Fixing of M.s Jali (Net) for protection of insect entry on existing Window / inlet air opening fixed on MS Patti / nut bolts / fastners for Air Inlet i/c cutting welding & Painting etc. as reqd. (Existing opening available for window) - For Inlet air |
| 32 | Providing and fixing of 4.5 Kg Co2 type first filling fire extinguishers with 1.0 mtr long high pressure hose and dischage horn and standard accessories, clamp and bend etc. complete as required (M/s Minimax, Cease Fire) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender