Tender For Construction Of Way Side Amenities (Wsa) At Auhar Distt-Bilaspur Hp(Sh: Part-1 (Civil Work Including Plumbing Work)(C/O Heritage Heaven & Retail Block I/C Landscaping Etc.),(Electrical Work),(Sh: Electrical Installation Including Fire Figh
Tender Value
67.93 Crore
Estimated cost
Bid Submission
20 Jul 2026
5 days left
EMD
78 Lakhs
Bank guarantee accepted
Document Fee
80000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Way Side Amenities (Wsa) At Auhar Distt-Bilaspur Hp(Sh: Part-1 (Civil Work Including Plumbing Work)(C/O Heritage Heaven & Retail Block I/C Landscaping Etc.),(Electrical Work),(Sh: Electrical Installation Including Fire Fighting System Etc.).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-In-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site ( to be arranged by the contractor) including its stacking leveling dressing including all lead and lifts by head load, mechnical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HP PWD specification. Any loss to the public/ private property during the course of execution and disposal of unserviceble metreial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm (Three hundred milimetre) apart including drilling 12 mm (Twelve millimetre) diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/ Lindane E.C. 20% (twenty percent) with 1% (one percent) concentration. , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm (twenty centemetre) in depth, consolidating each deposited layer by ramming and watering, upto all lead and lifts. , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level all work, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing and laying damp-proof course 40mm ( forty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 12.5mm ( twelve point five milimetre nominal size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 20mm ( twenty millimetre) nominal size graded stone aggregate upto plinth level all work , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Providing and laying in position specified grade of Reinforced cement concrete including pumping of concrete to site of laying but excluding the cost of centering and shuttering finishing all work upto plinth level in machine batched and machine mixed designed mix M-25( M- Twenty Five) grade with minimum cement content not less than 330 Kg/cubic metre (Three Hundred Thirty kilogram per cubic metre), including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per design and technical specifications, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Providing and laying in position specified grade of Reinforced cement concrete including pumping of concrete to site of laying but excluding the cost of centering and shuttering finishing all Work above to plinth level upto any floor level in machine batched and machine mixed designed mix M-25( M- Twenty Five) grade with minimum cement content not less than 330 Kg/cubic metre (Three Hundred Thirty kilogram per cubic metre), including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per design and technical specifications, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 10 | Steel reinforcement of approved brand for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level TMT of grade Fe-500D or more steel bars , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 13 | Columns, Pillars, Piers, Abutments, Posts and Struts. (Square and Circuler) |
| 14 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.. |
| 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 16 | Suspended floors, roofs, landings, balconies and access platform |
| 17 | Edges of slabs and breaks in floors and walls. Under 20 cm (Twenty centimetre) wide. |
| 18 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m (three point five metre ), for every additional height of 1 metre (one metre) or part thereof (Plan area to be measured): Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (one cement : six coarse sand) , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 21 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one Cement : Four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 22 | Extra for providing and placing in position 2 Nos.(two numbers) 6mm (six millimetre) dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks),including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 23 | Making plinth protection 50 mm (fifty milimetre) thick of cement concrete 1 :3:6 (one cement : three coarse sand : six graded stone aggregate) over 75 mm (seventy five millimetre) thick bed of dry brick ballast 40 mm (forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth and ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 24 | Providing Brick edging of 7cm (seven centimetre) wide 11.4cm.( eleven point four centimetre) deep to plinth protection with bricks of class designation 7.5 (seven point five) including grouting with cement mortar 1:4 (one cement : four fine sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 25 | Providing and laying15 mm( fifteen millimeter) cement plaster on rough side of single or half brick wall of mix 1:5 (one cement: five coarse sand) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 26 | Providing and laying15 mm( fifteen millimeter) cement plaster on rough side of single or half brick wall of mix 1:6 (one cement: six coarse sand) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 27 | Providing and laying12 mm ( Twelve millimeter) cement plaster of mix 1:4 (one cement: four fine sand) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 28 | Providing and laying Cement plaster 1:3 (one cement: three coarse sand) finished with a floating coat of neat cement 12 mm (twelve millimetre) cement plaster ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 29 | Providing and laying vitrified floor tiles in different sizes (minimum thickness 10 mm ( ten millimetre)) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera complete in pattern finish and the tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 30 | Vitrified tiles Matt/Antiskid finish of size Size of Tile 1200 x 1800 mm (One Thousand Two Hundred into One Thousand Eight Hundred millimetre) |
| 31 | Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm (Six Hundred into One Thousand Two Hundred millimetre) |
| 32 | Providing and fixing 25 mm (twenty five milimetre) thick wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with: Second class teak wood ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 33 | Providing and fixing first quality ceramic glazed wall tiles of size (300mm X 300mm) (three hundred into three hundred) conforming to IS : 15622 (minimum thickness 10 mm ( ten millimetre)) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimetre) thick bed of cement Mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per squaremetre) including pointing in white cement mixed with pigment of matching shade complete ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 34 | Providing and laying cement concrete flooring in 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm (forty millimetre) wide and 4 mm (four millimetre) thick ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 36 | Providing and laying machine cut, mirror polished Italian Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm (eighteen millimetre) thick stone slab laid over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm (four point four kilogram per square metre), including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. 18 mm (eighteen millimetre) thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 37 | Kota stone slab flooring over 20 mm( twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : 25mm( twenty five millimeter) thick including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 38 | Kota stone slabs 20 mm (twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 39 | Providing & Fixing Vinyl Sports Flooring Over Commercial Base Tiles including all material, Labour & T&P complete ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 40 | Providing & Fixing Carpet Flooring including all material, Labour & T&P complete ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 41 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimetre) thick stone slab over 20 mm (twenty millimetre) (average) thick base of cement mortar 1 :4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 42 | Providing and laying Leather finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm( egihteen millimeter) thick stone slab over 20 mm( twenty millimeter) (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified , Polished Granite stone siab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 43 | Providing and laying Ashlar Stone work for wall lining etc. (veneer work) upto any height, backing filled with a grout of average 12 mm (twelve milimetre) thick cement mortar 1:3 (one cement: three coarse sand) including pointing in white cement mortar 1 :2 (one white cement : two stone dust) with an admixture of pigment matching the stone shade, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | Providing and fixing 18 mm (Eighteen milimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty milimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm (zero point five square metre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 45 | Providing edge moulding to 18 mm (eighteen milimetre) thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 46 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 47 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of First class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm (thirty five milimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws complete in all respect ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 48 | Providing and fixing fire resistant door frame of section 143 x 57 mm (one hundred forty three into fifty seven millimetre) having built in rebate made out of 16 (sixteen)SWG G.I. sheet (zinc coating not less than 120 gm/sqm (one hundred twenty gram per square metre)) duly filled with vermuculite based concrete mix, suitable for mounting 60 (sixty) minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (ten into four millimetre) (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 49 | Providing and fixing 50 mm (fifty milimetre) thick glazed fire resistant door shutters of 60 (sixty) minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm (one hundred millimetre) wide, bottom rail 200 mm (two hundred millimetre) wide, made out of 16 (sixteen) SWG G.I.sheet (zinc coating not less than 120 gm/m2 (one hundred twenty gram per square metre) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. including applying a coat of approved brand fire resistant primer etc. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 50 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285,of polyester powder coating 50 micron) Jindal or equivalent make, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws,(Glazing, paneling and dash fasteners to be paid for separately) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 51 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (fifty) micron)) including applying a coat of approved brand fire resistant primer etc. |
| 52 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 53 | Providing and fixing 12 mm (twelve millimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge:- Pre-laminated particle board with decorative lamination on both sides.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing 12mm (twelve millimetre) thick toughened reflective Glass of saint gobian with EPDM rubber / neoprene gasket etc. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Providing and fixing 12mm (twelve millimetre) thick frameless toughened glass door shutter of approved brand and manufacture, including Providing and fixing top & bottom pivot & spring type fixing arrangement, Door handle, lock and stopper and making necessary holes etc. for fixing required door fittings all complete ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60mm ± 0.2mm (one point six zero plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, (Single / double glass panes and silicon sealant shall be paid separately) For uPVC frame, sash and mullion extruded profiles minus 5%(five percentage) tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made, Fixed window / ventilator made of (small series) frame 47 x 50 mm (forty seven into fifty millimetre) & mullion 47 x 68 mm (forty seven into sixty eight millimetre) both having wall thickness of 1.90 ± 0.2 mm(one point nine zero plus minus zero point two millimetre) and single glazing bead of appropriate dimension. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | 125 mm (one hundred twenty five millimetre) size |
| 60 | 75mm (seventy five millimetre) size |
| 61 | Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | 150X10mm (one hundred fifty into ten millimetre) size |
| 63 | 100X10mm (one hundred into ten millimetre) size |
| 64 | Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 65 | 300x16 mm (Three hundred into sixteen millimetre) size |
| 66 | 250X16mm (Two hundred fifty into sixteen millimetre) size |
| 67 | Providing and fixing bright finished brass 100 mm (one hundred millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles of approved quality with necessary screws etc. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etc.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | 100x75x4 mm (one hundred into seventy five into four millimetre) size |
| 70 | 75x63x4 mm (Seventy five into Sixty three into four millimetre) size |
| 71 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing and fixing stainless Steel concealed Hydraulic Door Closer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 74 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm (fifteen into three millimetre)and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm (zero point six three millimetre) dia wire and 1.4 mm (one point four milimetre) aperture on both sides ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 75 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg (one hundred twenty five kilogram) , for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. with stainless steel cover plate minimum 1.25 mm (one point two five millimetre) thickness,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15 (fifteen)) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm (two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete (only weight of grill to be measured for payment) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 77 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. , Electric resistance or induction butt welded tubes ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 78 | Providing and fixing stainless steel (Grade 304)(Grade three hundred four) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 79 | Providing and applying white cement based putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 80 | Providing and applying Wall painting with Emulsion Paint, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 81 | Finishing walls with textured exterior paint of required shade New work (Two or more coat applied @ 3.28 ltr/10 sqm ( at the rate of Three point two eight litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ( at the rate two point two zero kilogram per ten square metre) (ASAIN/NEROLAC/IBerger paints or of approved brand ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 82 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 83 | Painting with Deco paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 84 | Providing 10 mm (ten millimetre) thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m (five millimetre) above floor level, over first class kail wood strips 25x6 mm (twenty five into six millimetre) with 10 mm (ten millimetre) gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 85 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm (five hundred ninety five into five hundred ninety five millimetre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm(one hundred twenty gram per square metre), both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm( twenty four into thirty eight millimetre) made from 0.30 mm (zero ponit three zero millimetre) thick (minimum) sheet, spaced at 1200 mm (one thousand two hundred millimetre) center to center and cross \\"T\\" of size 24x25 mm (twenty four into twenty five millimetre) made of 0.30 mm (zero ponit three zero millimetre) thick (minimum) sheet, 1200 mm (one thousand two hundred millimetre) long spaced between main \\"T\\" at 600 mm (six hundred millimetre) center to center to form a grid of 1200x600 mm (one thousand two hundred into six hundred millimetre) and secondary cross \\"T\\" of length 600 mm (six hundred millimetre) and size 24x25 mm (twenty four into twenty five millimetre) made of 0.30 mm (zero ponit three zero millimetre) thick (minimum) sheet to be interlocked at middle of the 1200x600 mm (one thousand two hundred into six hundred millimetre) panel to form grids of 600x600 mm (six hundred into six hundred millimetre) and wall angle of size 24x24x0.3 mm(twenty four into twenty four into zero ponit three zero millimetre) and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.60 mm (twenty seven into thirty seven into twenty five into one ponit six zero millimetre) fixed to ceiling with 12.5 mm (twelve point five millimetre) dia and 50 mm (fifty millimetre) long dash fasteners, 4 mm (four millimetre)GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm (eighty five into thirty into zero point eight millimetre) spaced at 1200 mm (one thousand two hundred millimetre) center to center along main T, bottom exposed width of 24 mm (twenty four millimetre) of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm (twelve point five milimetre) thick square edge PVC Laminated Gypsum Tile of size 595x595 mm (five hundred ninety five into five hundred ninety five millimetre), made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm (zero point one six millimetre) thick fire retardant PVC film on the face side and 12micron (twelve micron) metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 86 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (zero point five zero millimetre) (+ 0.05 %(plus zero point zero five percentage)) total coated thickness with zinc coating 120 gm/sqm (one hundred twenty gram per square metre) as per IS: 277, in 240 mpa (two hundred forty mega pascal) steel grade, 5-7 (five dash seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen dash eighteen) microns. Sheet should have protective guard film of 25 (twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 (twelve) metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)(five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 87 | Providing and fixing MS Hanging False Ceiling of size 25X100mm & 75 X200 mm (twenty five into one hundred millimetre and seventy five into two hundred millimetre) including all material, labour T & P ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 88 | Providing and fixing Laminated Rafter False Ceiling of Size 150X35mm (one hundred fifty into thirty five millimetre) including all material, labour T & P ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 89 | Providing and fixing Metal grid False Ceiling including all material, labour T & P ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 90 | Providing and fixing Open Cell G.I. Traingular False Ceiling including all material, labour T & P ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 91 | Providing and fixing G.I. Open Cell False Ceiling ofsize 150X150mm (one hundred fifty into one hundred fifty millimetre) including all material, labour T & P ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 92 | Providing and fixing 18 mm (Eighteen millimetre) multipurpose Cement fiber board as per IS: 14862 (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc.complete (frame work to be paid seperatately) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 93 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm( zero point fifty millimeter) (+0.05% (zero point zero five percentage)) total coated thickness, Zinc coating 120 gm/sqm ( one hundred twenty gram per square metre) as per IS: 277, in in 240 mpa (two hundred forty mega pascal) steel grade, 5-7 (five dash seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen dash eighteen) microns using self drilling/ self tapping screws complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 94 | Ridges plain 500-600mm( five hundred to six hundred millimeter) |
| 95 | Gutter (600 mm (six hundred millimeter) over all girth) |
| 96 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap etc. complete for thermal expansion, (i) Single socketed pipes. 110 mm (one hundred ten millimetre) diameter. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 97 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Bend 87.5°(eighty seven point five degree), 110 mm(one hundred ten millimetre) bend,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 98 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories 110 mm (one hundred ten millimetre) Shoe (Plain),including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 99 | Providing and fixing specified wood frame work consisting of battens 50x25 mm (fifty into twenty five millimetre) fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 100 | Providing and fixing plywood 4 mm (four millimetre) thick, one side decorative veneer conforming to IS: 1328 (type-I), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 101 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class teak wood 50 x 20 mm (fifty into twenty millimetre) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 102 | Providing and fixing specified wood work including all material , Labour T&P complete in ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 103 | Providing and applying french spirit polishing : Two or more coats on new works including a coat of wood filler,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 104 | Providing and fixing WPC Panel at Walls including supply all metarial T & P complete in all respect as per Engineer in charge,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.same. |
| 105 | Providing and fixing PVC Fluted Panel at Walls including supply all metarial T & P complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 106 | Supplying and fixing Roof Finished in Shingles With 5 mm (five millimetre) Membrane Base of Saint-Gobain On Base Cement Board Over Ms Frame Work ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 107 | Suppying and fixing Bison Board including all material, labour T & P ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 108 | Suppying and fixing MS Sheet including all material, labour T & P complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 109 | Suppying and fixing HPL Sheet including all material, labour T & P complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 110 | Suppying and fixing FRP made Bracket including all material, labour T & P (Smaller Size),including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 111 | Suppying and fixing FRP made Bracket including all material, labour T & P, (Larger Size)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 112 | Suppying and fixing FRP made Hanging Item including all material, labour T & P complete in all respect ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 113 | Suppying and fixing Aluminum Louvers panel size 6 inch (six inches) power coated including all material, labour T & P complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 114 | Providing and fixing Corain Slab Counter top including all material, labour T & P complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 115 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm (at the rate zero point four eight eight kilogram per square metre) mixed with water proofing cement compound @ 0.253 kg/ sqm(at the rate zero point two five three kilogram per square metre). This layer will be allowed to air cure for 4 hours(four hours). (b) Second layer of slurry of cement @ 0.242 kg/sqm (at the rate zero point two four two kilogram per square metre) mixed with water proofing cement compound @ 0.126 kg/sqm (at the rate zero point one two six kilogram per square metre). This layer will be allowed to air cure for 4 hours (four hours) followed with water curing for 48 hours (forty eight hours). The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 116 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm (at the rate zero point four eight eight kilogram per square metre) mixed with water proofing cement compound @ 0.253 kg/sqm. (at the rate zero point two five three kilogram per square metre) (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm (ten centimetre). (c) third layer of 1.5 mm (one point five millimetre) thickness consisting of slurry of cement @ 1.289 kg/sqm ( at the rate one point two eight nine kilogram per square metre) mixed with water proofing cement compound @ 0.670 kg/sqm (at the rate zero point six seven zero kilogram per square metre) and coarse sand @ 1.289 kg/sqm.(at the rate one point two eight nine kilogram per square metre) This will be allowed to air cure for 4 hours (four hours) followed by water curing for 48 hours (forty eight hours). The entire treatment will be taken upto 30 cm (thirty centimetre) on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar ((which will be paid for separately), for the purpose of measurement the entire treated surface will be measured).,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 117 | Providing & fixing Tile brick masonry work 5 cm (five centimetre) thick with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 (ten) in cement mortar 1:3 (one cement : three coarse sand) in superstructure above plinth Including required material, Scaffolding for all height, curing, necessary grooving, grouting /pointing with cement mortar and compound as per manifacturer's specifications, cleaning with water jet and epoxy coating complete in all respect.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 118 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 119 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 120 | Supplying and Laying at site 90 mm to 45 mm ( ninety millimetre to forty five millimetre) size stone aggregate For Filteratioon Tank including s\upply of all materials T & P etc. Complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 121 | Supplying and stacking at site. 63 mm to 45 mm (sixty three millimetre to forty five millimetre) size stone aggregate WBM 2, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 122 | Supplying and stacking at site. 53 mm to 22.4 mm (fifty three millimetre to twenty two point four millimetre) size stone aggregate WBM 3,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 123 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 (three) wheeled road / vibratory roller 8-10 tonne (eight to ten tonne) capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 124 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm (fifty millimeter) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 125 | 80 mm (Eighty millimetre) thick C.C. paver block of M-40 (mix-Forty) grade with approved color design and pattern. |
| 126 | 60mm (Sixty millimetre) thick cement concrete paver block of M-35 (mix- thirty) grade with approved colour, design & pattern |
| 127 | Providing and laying in position specified grade of Reinforced cement concrete including pumping of concrete to site of laying but excluding the cost of centering and shuttering finishing all Work above to plinth level upto any floor level in machine batched and machine mixed designed mix M-30( M- Thirty) grade with minimum cement content not less than 340 Kg/cubic metre (Three Hundred Forty kilogram per cubic metre), including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per design and technical specifications,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 128 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required (In gratings. frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 129 | Providing and laying Flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm( eighteen millimeter) thick stone slab over 20 mm( twenty millimeter) (average) thick base of cement mortar 1:4 (one cement: four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 130 | Applying and Finishing walls with 100% (one hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm (at the rate one point four three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.(at the rate zero point nine zero litre per ten square metre),including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 131 | Providing and fixing M.S. foot rests including fixing in manholes with 20x20x10 cm (twenty into twenty into ten centimetre) cement concrete blocks in 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty milimetre) nominal size) as per standard design : With 20x20 mm (twenty into twenty milimetre) square bar, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 132 | Making soak pit 2.5 m (two point five metre) diameter 3.0 metre (three point zero metre) deep with 45 x 45 cm (forty five into forty five centimetre) dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm (hundred millimetre) diameter, 1.8 m (one point eight metre) long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 133 | Supplying & Fixing of FRP Made grating above drain including labour material T & P complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 134 | Trenching in ordinary soil up to a depth of 60cm (Sixty centimetre) including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in any lead and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 135 | Supplying and stacking of good earth at site including royalty and carriage up to any lead (earth measured in stacks will be reduced by 20% (twenty percent) for payment), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 136 | Supplying and stacking sludge at site including royalty and carriage up to any lead (sludge measured in stacks will be reduced by 8% (eight percent) for payment).,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 137 | Uprooting weeds from the trenched area after 10 to 15 days (ten to fifteen days) of its flooding with water including disposal of uprooted vegetation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 138 | Fine dressing the ground.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 139 | Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 140 | Mixing earth and sludge or manure in the required proportion specified or directed ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 141 | Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days (thirty days) or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). In rows 5 cm apart in either direction. In rows 7.5 cm(seven point five centimetre) apart in either direction.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 142 | Preparation of beds for hedging and shrubbery by excavating 60cm (sixty centimetre) deep and trenching the excavated base to a further depth of 30 cm (thirty centimetre), refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (eight parts of stacked volume of earth after reduction by 20% (twenty percent) : one part of stacked volume of sludge or manure after reduction by 8%(eight percent)), flooding with water,filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a any lead and lift (cost of sludge, manure or extra earth to be paid for separately)., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 143 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (two parts of stacked volume of earth after reduction by 20% (twenty percent) : one part of stacked volume of manure after reduction by 8%(eight percent)) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm (sixty centimetre) dia, and 60 cm (sixty centimetre) deep, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 144 | Providing and fixing M.S. flat iron tree guard 60 cm (sixty centimetre) dia and 2 m (two metre) high, above ground consisting 4 nos (four numbers) 25 x 6 mm, 2.25 m (twenty five into six into two point two five millimetre) long and 8 nos (eight numbers) 25 x 3 mm 2 m (twenty five into three into two millimetre) long verticals M.S. flats, riveted to 3 nos (three numbers) 25 x 6 mm (twenty five into six millimetre) M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm (eight millimetre) dia. and 30 mm (thirty millimetre) long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm (one millimetre) thick M.S. sheet of size 250x100 mm (two hundred fifty into one hundred millimetre) shall be welded to the tree guard near the middle height and lettered HPPWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm (twenty five millimetre), refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 145 | Supplying and Fixing Outdoor Slide with straight design surface made up of HDPE Material including Labour T & P complete in all respect as per site incharge.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rate includes, octroi, Malkhana , Toll tax , Goods and Service Tax, building and other construction work, welfare cess royalty or any other tax, levy or cess in respect of input for or output by this contract shall be payable by the contractor and Government shall not entertain any claim whatsoever in this respect of the same |
| 146 | Supplying and Fixing Outdoor Slide with sprial design surface made up of FRP Material including Labour T & P complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 147 | Supplying and Fixing Swing made up of Virgin Polylethene and frame material CRC pipe of 25 mm (twenty five millimetre) dia with wall thickness of 20 (twenty) gauge including Labour T & P complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 148 | Supplying and Fixing Garden Swing with seat without Roof (2 (two)Seater) including Labour T & P complete in all respect as per site incharge., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 149 | PLUMBING WORK:-Supply, installation and commissioning of Counter top wash basin of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 150 | Supply, installation and commissioning of 'WALL HUNG WC, CISTERN of approved makes and as approved by Engineer Incharge.. Item includes all hardware required for installation,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 151 | Supply, installation and commissioning of ''SINGLE LEVER BASIN MIXER of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 152 | Supply, installation and commissioning of ''HEALTH FAUCET of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 153 | Supply, installation and commissioning of ''SHOWER HEAD of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 154 | Supply, installation and commissioning of ''DIVERTER of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 155 | Supply, installation and commissioning of ''SPOUT of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 156 | Supply, installation and commissioning of ''SPOUT of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 157 | Supply, installation and commissioning of ''CP WASTE JALI of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 158 | Supply, installation and commissioning of ''Bottle trap (with internal partition) 32 mm (thirty two millimetre) size with 250 mm & 190 mm (two hundred fifty millimetre and one hundred ninety millimetre) long wall connection pipes of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 159 | Supply, installation and commissioning of 450 mm (four hundred fifty millimetre) long braided hose of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 160 | Supply, installation and commissioning of ''Angular stop cock with wall flange of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 161 | Supply, installation and commissioning of ''soap dispenser with glass bottle of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 162 | Supply, installation and commissioning of grab bar of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 163 | Supply, installation and commissioning of ''Tissue paper holder of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 164 | Supply, installation and commissioning of ''Towel ring of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 165 | Supply, installation and commissioning of Towel ring of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation.,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 166 | Supply, installation and commissioning of flush plate of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 167 | Supply, installation and commissioning of coat hook of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 168 | Supply, installation and commissioning of exposed part of floor mounted single lever bath mixer of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 169 | Supply, installation and commissioning of under counter basin of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 170 | Supply, installation and commissioning of Quarter turn piller cock of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 171 | Supply, installation and commissioning of wall hung WC of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 172 | Supply, installation and commissioning of Urinal of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 173 | Supply, installation and commissioning of Urinal partition of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 174 | Supply, installation and commissioning of Urinal partition of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 175 | Supply, installation and commissioning of hand dryer of approved makes and as approved by Engineer Incharge. Item includes all hardware required for installation, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 176 | Providing, fixing, testing & commissioning uPVC SWR pipes (Type-B) for soil, waste and vent conforming to IS 13592-1992 along with all required fittings like tees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 177 | 75 mm (OD) (seventy five millimetre outter diametre) SWR Pipe |
| 178 | 90 mm (OD) (ninety millimetre outter diametre) SWR Pipe |
| 179 | 110 mm (OD) (one hundred ten millimetre outter diametre) SWR Pipe |
| 180 | 160 mm (OD) (one hundred sixty millimetre outter diametre) SWR Pipe |
| 181 | Providing, fixing, testing & commissioning uPVC SWR pipes (Type-B) for soil, waste and vent conforming to IS 13592-1992 along with all required fittings like tees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 182 | 90 mm (OD) ( ninety millimetre outter diametre) SWR Pipe |
| 183 | 110 mm (OD) ( one hundred ten millimetre outter diametre) SWR Pipe |
| 184 | Providing, fixing & testing of UPVC pipes (IS : 4985- latest, class-3(three), 6 Kg/cm2 (six kilogram per centimetre square) pressure) including injection moulded fittings (heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good as required at Site. (For Kitchen), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 185 | 110 mm (OD) (one hundred ten millimetre outter diametre) SWR Pipe |
| 186 | 160 mm (OD) (one hundred sixty millimetre outter diametre) SWR Pipe |
| 187 | Providing and fixing uPVC inlet fitting (Hopper) maximum 3 (three) inlets 32 mm (thirty two millimetre), 40 mm (forty millimetre) or 50 mm (fifty millimetre) size fabricated from 110 OD (one hundred ten millimetre outter diametre) uPVC pipe fixed to uPVC trap jointing with solvent cement joint and set in a cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix complete including cost of cutting and making good the walls and floors wherever required, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 188 | Providing and fixing uPVC inlet fitting (Hopper) maximum 3 (three) inlets 32 mm (thirty two millimetre), 40 mm (forty millimetre) or 50 mm (fifty millimetre) size fabricated from 110 OD (one hundred ten millimetre outter diametre) uPVC pipe fixed to uPVC trap jointing with solvent cement joint and set in a cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix complete including cost of cutting and making good the walls and floors wherever required, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 189 | Providing and fixing UPVC, P or S trap of self cleaning design with / without vent arm setting in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix complete including cost of cutting & making good the wall / floors wherever required, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 190 | 110 mm (one hundred ten millimetre) inlet & 75 mm (seventy five millimetre) outlet |
| 191 | 110 mm (one hundred ten millimetre) inlet & 110 mm (one hundred ten millimetre) outlet |
| 192 | Providing and fixing UPVC, P or S trap of self cleaning design with / without vent arm setting in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix complete including cost of cutting & making good the wall / floors wherever required, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 193 | 110 mm (one hundred ten millimetre) inlet & 75 mm (seventy five millimetre) outlet |
| 194 | 110 mm (one hundred ten millimetre) inlet & 110 mm (one hundred ten millimetre) outlet |
| 195 | Providing, fixing, testing and commissioning of uPVC cleanout plug conforming to IS:14735 – 1999 complete with all fitting, accessories and civil works,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 196 | 110 mm OD (one hundred ten millimetre outter diametre) |
| 197 | 160 mm OD (one hundred sixty millimetre outter diametre) |
| 198 | 210 mm OD (two hundred ten millimetre outter diametre) |
| 199 | Providing, fixing, testing and commissioning of uPVC cleanout plug conforming to IS:14735 – 1999 complete with all fitting, accessories and civil works, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 200 | 110 mm OD (one hundred ten millimetre outter diametre) |
| 201 | 160 mm OD (one hundred sixty millimetre outter diametre) |
| 202 | Providing, fixing & testing uPVC pipes, conforming to IS 4985 class 5 (10 kg/cm2) (ten kilogram per centimetre square) including injection moulded fittings, jointing with solvent cement, cutting and making good the floors and walls and jointing to trap/waste pipe, complete of outer dia , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 203 | 32 mm dia. (thirty two millimetre diametre) |
| 204 | 40 mm dia. (forty millimetre diametre) |
| 205 | 50 mm dia. (fifty millimetre diametre) |
| 206 | 63 mm dia. (sixty three millimetre diametre) |
| 207 | Providing, fixing & testing uPVC pipes, conforming to IS 4985 class 5 (10 kg/cm2) (ten kilogram per centimetresquare ) including injection moulded fittings, jointing with solvent cement, cutting and making good the floors and walls and jointing to trap/waste pipe, complete of outer dia, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 208 | 50 mm dia. (fifty millimetre diametre) |
| 209 | 63 mm dia. (sixty three millimetre diametre) |
| 210 | Providing and fixing uPVC floor drain with uPVC reducing elbow including all fitting and accessories fixed in cement mortar complete in all respect, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 211 | 75 mm x 63 mm (Seventy five millimetre into sixty three millimetre) |
| 212 | 110 mm x 63 mm (one hundred ten millimetre into sixty three millimetre) |
| 213 | Providing and fixing uPVC floor drain with uPVC reducing elbow including all fitting and accessories fixed in cement mortar complete in all respect of size 110 mm x 63 mm (one hundred ten millimetre into sixty three millimetre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 214 | Providing & fixing 1 mm (one millimetre) thick stainless steel grating with rim of approved design including setting in floor with cement mortar. (For Trap and Floor Drain), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 215 | 125 mm dia (one hundred twenty five millimetre diametre) |
| 216 | 100 mm dia (one hundred millimetre diametre) |
| 217 | Providing & fixing 1 mm (one millimetre) thick stainless steel grating with rim of approved design including setting in floor with cement mortar. (For Trap and Floor Drain), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 218 | 125 mm dia (one hundred twenty five millimetre diametre) |
| 219 | 100 mm dia (one hundred millimetre diametre) |
| 220 | Providing and fixing in position stainless steel cockroch trap consisting of 0.45 mm (zero point forty five millimetre) thick inner and outer cup and 1.00 mm (one millimetre) thick top grating (Jali) with ring to be fixed inside C.I. or uPVC ‘P’ traps with cement concrete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 221 | Providing and laying cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix 75 mm (seventy five millimetre) in bed and alround uPVC soil & waste pipes including excavation, refilling where required complete in all respect as per standard design, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 222 | Pipe 90 to 160 mm OD (ninety to one hundred sixty millimetre outter diametre) |
| 223 | Pipe 32 to 63 mm OD (thirty two to sixty three millimetre outter diametre) |
| 224 | Providing and laying cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix 75 mm in bed and alround uPVC soil & waste pipes including excavation, refilling where required complete in all respect as per standard design, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 225 | Pipe 90 to 160 mm OD (ninety to one hundred sixty millimetre outter diametre) |
| 226 | Pipe 32 to 63 mm OD (thirty two to sixty three millimetre outter diametre) |
| 227 | Providing and fixing straight/offset type Macfit single body push fit type WC Pan Connector with factory supplied spring loaded seal guard with integrated single mould sealing fins made of flexible EVA Body, including bush/adaptor for use with CI Pipe as supplied with Pan Connector (For European water closet), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 228 | Providing and fixing straight/offset type Macfit single body push fit type WC Pan Connector with factory supplied spring loaded seal guard with integrated single mould sealing fins made of flexible EVA Body, including bush/adaptor for use with CI Pipe as supplied with Pan Connector (For European water closet), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 229 | Providing, fixing & testing of UPVC rain water pipes (IS : 4985-1983 class-3, 6 Kg/cm2 (six kilogram per centimetre square) pressure) including injection moulded fittings (heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good as required at Site.(RAIN WATER PIPES), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 230 | 110 mm OD (one hundred ten millimetre outter diametre) |
| 231 | 110 mm OD (one hundred ten millimetre outter diametre) (with excavation) |
| 232 | 160 mm OD (one hundred sixty millimetre outter diametre) |
| 233 | 160 mm OD (one hundred sixty millimetre outter diametre) (with excavation) |
| 234 | Providing, fixing & testing of UPVC rain water pipes (IS : 4985-1983 class-3, 6 Kg/cm2 (six kilogram per centimetre square) pressure) including injection moulded fittings (heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good as required at Site.(RAIN WATER PIPES), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 235 | 160 mm OD (one hundred sixty millimetre outter diametre) |
| 236 | 160 mm OD (one hundred sixty millimetre outter diametre) (with excavation) |
| 237 | Providing and fixing of C.I. Grating including all fitting and accessories and cutting and making good the walls, floor and R.C.C. work complete (For Balcony & Terrace Rain Water Pipes),of size 150 mm x 150 mm (one hundred fifty into one hundred fifty millimetre), 10 mm (ten millimetre) thick, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 238 | Providing and laying cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix 75 mm (seventy five millimetre) thick in bed and all around UPVC Rain water pipes burried under floor, including shuttering and centering for complete in all respects (For Burried Rain Water Pipes/Connection to CB), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 239 | 110 mm OD (one hundred ten millimetre outter diametre) |
| 240 | 160 mm OD (one hundred sixty millimetre outter diametre) |
| 241 | Providing and laying cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix 75 mm (seventy five millimetre) thick thick in bed and all around UPVC Rain water pipes burried under floor, including shuttering and centering for complete in all respects (For Burried Rain Water Pipes/Connection to CB), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 242 | 110 mm OD (one hundred ten millimetre outter diametre) |
| 243 | 160 mm OD (one hundred sixty millimetre outter diametre) |
| 244 | Making khurras with average minimum thickness of 5 cm cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix over PVC sheet 1m x 1m x 400 micron (one metre into one metre into four hundred micron), finished with 12 mm (twelve millimetre) cement plaster 1 : 3 (one cement : three coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete of size Khurras with CI grating, Size :300 x 300 mm (three hundred into three hundred millimetre), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 245 | Making khurras with average minimum thickness of 5 cm cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix over PVC sheet 1m x 1m x 400 micron (one metre into one metre into four hundred micron), finished with 12 mm (twelve millimetre) cement plaster 1 : 3 (one cement : three coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete of size Khurras with CI grating, Size :300 x 300 mm (three hundred into three hundred millimetre), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 246 | Supply, installation, testing & commissioning of GI pipes and fittings conforming to IS : 1239 (heavy class) with fittings, union, makes chases in wall and making good the same in cement mortar 1 : 2 (one cement : two coarse sand) as directed by Project manager, complete in all respects including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work. (Drainage/Sewage Sump Riser), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 247 | 80 mm (Eighty millimetre) |
| 248 | 100 mm (one hundred millimetre) |
| 249 | Providing and constructing oil and grease separator chamber 1500x 900mm (one thousand five hundred into nine hundred millimetre) with required depth inside with 7.5 (seven point five) class designated brick work in cement mortar 1:6 (one cement : six fine sand) with 560 mm (five hundred sixty millimetre) dia C.I double seal medium duty manhole cover (2 Nos.) (two numbers) top slab 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix with minimum 1.5%(one point five percent) reinforcement foundation concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 20 mm (twenty millimetre) nominal size) mix including two brick masonry baffle walls, with necessary excavation, back filling and disposal of surface earth compete with inlet, outlet, PVC coated foot rest. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 250 | Providing and constructing oil and grease separator chamber 1500x 900mm (one thousand five hundred into nine hundred millimetre) with required depth inside with 7.5 (seven point five) class designated brick work in cement mortar 1:6 (one cement : six fine sand) with 560 mm (five hundred sixty millimetre) dia C.I double seal medium duty manhole cover (2 Nos.) (two numbers) top slab 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) mix with minimum 1.5%(one point five percent) reinforcement foundation concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 20 mm (twenty millimetre) nominal size) mix including two brick masonry baffle walls, with necessary excavation, back filling and disposal of surface earth compete with inlet, outlet, PVC coated foot rest. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 251 | Supply, installation, testing and commissioning of HDPE Pipe PE-100 Material grade, PN 6 Kg/cm2 (six kilogram per centimetre square) pressure) rating conforming to IS : 4984 - 1995/ISO : 4427-1996 (E) including heavy duty Electro welded fitting such as reducers, tees, bends, flange, clamps including sand Bed of 150 mm thick laid as per manufacturer recommendation etc.(STP Bypass to authority Sewer)., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 252 | 125 mm OD (one hundred twenty five millimetre outter diametre) |
| 253 | 160 mm OD (one hundred sixty millimetre outter diametre) |
| 254 | Providing and fixing CPVC (Chlorinated Poly Vinyl Chloride) pipes conforming to CTS-SDR 11.0 OR SCHEDULE 80 complete with CPVC fittings e.g., couplings, elbows, tees, crosses, union, transition union,reducers, SCREWED metal end fittings/adopters, powder coated metal strap claps etc. including necessary cutting of pipes, jointing with CPVC solvent cement conforming to ASTM-493 including cutting and making good the walls, floor etc. complete with testing, commissoining and disinfection of pipe lines., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 255 | 15 mm (fifteen millimetre) nominal bore |
| 256 | 20 mm (twenty millimetre) nominal bore |
| 257 | 25 mm (twenty five millimetre) nominal bore |
| 258 | 32 mm (thirty two millimetre) nominal bore |
| 259 | 40 mm ( forty millimetre) nominal bore |
| 260 | 50 mm (fifty millimetre) nominal bore |
| 261 | 65 mm (sixty five millimetre) nominal bore (Schedule 80) |
| 262 | 80 mm (eighty millimetre) nominal bore (Schedule 80) |
| 263 | 100 mm (one hundred millimetre) nominal bore (Schedule 80) |
| 264 | Providing & fixing thermal insulation on hot water pipes a flexible elastomeric foam of closed cells structure having thermal conductivity of 0.038 W/M.K (zero point zero three eight watt per metre kelvin) at 40°C (forty degree celcius), water vapour permeability fire propagation including all accessories e.g. adhesive and ape on joint complete as per specification. All joints shall be sealed with adhesive & cotton tape., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 265 | Concealed Piping in Toilet & Kitchen. 15 mm (fifteen millimetre) (6mm (six millimetre) thick insulation) |
| 266 | 20 mm (twenty millimetre) (6mm (six millimetre) thick insulation) |
| 267 | 25 mm (twenty five millimetre) (6mm (six millimetre) thick insulation) |
| 268 | Providing & fixing thermal insulation on hot water pipes a flexible elastomeric foam of closed cells structure having thermal conductivity of 0.038 W/M.K (zero point zero three eight watt per metre kelvin) at 40°C (forty degree celcius), water vapour permeability fire propagation including all accessories e.g. adhesive and ape on joint complete as per specification. Thermal Insulation (Exposed) all joints shall be sealed with adhesive & cotton tape., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 269 | Expose Piping in Shaft 15 mm (fifteen millimetre) (9 mm (nine millimetre) thick insulation) |
| 270 | 20 mm (twenty millimetre) (9 mm (nine millimetre) thick insulation) |
| 271 | 25 mm (twenty five millimetre) (9 mm (nine millimetre) thick insulation) |
| 272 | 32 mm (thirty two millimetre) (9 mm (nine millimetre) thick insulation) |
| 273 | 40 mm (forty millimetre) (9 mm (nine millimetre) thick insulation) |
| 274 | 50 mm (fifty millimetre) (9 mm (nine millimetre) thick insulation) |
| 275 | 65 mm (sixty five millimetre) (9 mm (nine millimetre) thick insulation) |
| 276 | Expose Piping at Terrace:-20 mm (twenty millimetre) (13 mm (thirteen millimetre) thick insulation) |
| 277 | 25 mm (twenty five millimetre) (13 mm (thirteen millimetre) thick insulation) |
| 278 | 32 mm (thirty two millimetre) (13 mm (thirteen millimetre) thick insulation) |
| 279 | 80 mm (eighty millimetre) (13 mm (thirteen millimetre) thick insulation) |
| 280 | Providing and fixing forged brass nickel plated lever operated ball valve PN 10 (ten) of full flow with forged brass hard chrome plated ball. Lever should be anti rust coating, complete in all respects (For Domestic, HWS/ROWS Application), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 281 | 15 mm dia (fifteen millimetre diametre) |
| 282 | 20 mm dia (twenty millimetre diametre) |
| 283 | 25 mm dia (twenty five millimetre diametre) |
| 284 | 32 mm dia (thirty two millimetre diametre) |
| 285 | 40 mm dia (forty millimetre diametre) |
| 286 | 50 mm dia (fifty millimetre diametre) |
| 287 | Providing and fixing forged brass nickel plated lever operated ball valve PN 10 (ten) of full flow with forged brass hard chrome plated ball. Lever should be anti rust coating, complete in all respects (For Domestic, HWS/ROWS Application), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 288 | 15 mm dia (fifteen millimetre diametre) |
| 289 | 20 mm dia (twenty millimetre diametre) |
| 290 | 25 mm dia (twenty five millimetre diametre) |
| 291 | 32 mm dia (thirty two millimetre diametre) |
| 292 | 40 mm dia (forty millimetre diametre) |
| 293 | 50 mm dia (fifty millimetre diametre) |
| 294 | Providing and fixing cast iron double flanged butterfly valve PN 10 (ten) complete with 2 nos.(two numbers) matching flanges, bolts, nuts, 3.0 mm (three point zero millimetre) thick compressed asbestos gasket, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 295 | 50 mm dia (fifty millimetre diametre) |
| 296 | 65 mm dia (sixty five millimetre diametre) |
| 297 | 80 mm dia (eighty millimetre diametre) |
| 298 | 100 mm dia (one hundred millimetre diametre) |
| 299 | Disinfecting water mains by domestic & Flushing with water containing Bleaching Powder at 0.5 gm (zero point five gram) per liter of water and cleaning the same with fresh water, operation to be repeated three times including getting the samples of water from disinfected main tested in the municipal laboratory, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 300 | Providing and fixing dual plate wafer type C.I. non-return valve conforming to IS: 5312 rated to PN 1.6 (one point six). with bolts, nuts, 3mm thick gasket and matching flanges as per table 'E' complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 301 | 40 mm dia (forty millimetre diametre) |
| 302 | 50 mm dia (fifty millimetre diametre) |
| 303 | 65 mm dia (sixty five millimetre diametre) |
| 304 | 80 mm dia (eighty millimetre diametre) |
| 305 | Providing and fixing gunmetal non-return valves vertical or horizontal tested to 15 Kg/cm2 (fifteen kilogram per centimetre square) as per IS:778, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 306 | 20 mm dia (twenty millimetre diametre) |
| 307 | 25 mm dia (twenty five millimetre diametre) |
| 308 | 32 mm dia (thirty two millimetre diametre) |
| 309 | 40 mm dia (forty millimetre diametre) |
| 310 | Providing and fixing gunmetal non-return valves vertical or horizontal tested to 15 Kg/cm2 (fifteen kilogram per centimetre square) as per IS:778, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 311 | 25 mm dia (twenty five millimetre diametre) |
| 312 | 32 mm dia (thirty two millimetre diametre) |
| 313 | 40 mm dia (forty millimetre diametre) |
| 314 | 50 mm dia (fifty millimetre diametre) |
| 315 | Providing and fixing 15 mm dia (fifteen millimetre diametre) forged brass auto air vent valve PN 10 (ten) rating including all fitting & accessories, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 316 | Providing and fixing 15 mm dia (fifteen millimetre diametre) forged brass auto air vent valve PN 10 (ten) rating including all fitting & accessories, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 317 | Providing, fixing testing & commissioning of IP 67 (Weather Proof /Aluminum casing with positioner to indicate the valve position with key type manual overdrive) motorized Butterfly/ Ball valve (with by pass line) with float type sencors suitable for 240 volt (two hundred forty voltage) with working pressure rating not less than 5 Kg/cm2 (five kilogram per centimetre square) with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables,conduits upto junction box,pipe butterfly/ball valves etc. complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 318 | Size of valve 40 mm dia (forty millimetre diametre) |
| 319 | Size of valve 50 mm dia (fifty millimetre diametre) |
| 320 | Size of valve 65 mm dia (sixty five millimetre diametre) |
| 321 | Providing & fixing digital type water meter with direct reading dial in KL all internal parts in gunmetal or brass, butterfly valve, strainer, flanged distance piece for easy removal in future, Bourden type pressure guage and isolation cock including necessary test certificate for the meter from local municipal authorities, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 322 | 25 mm dia (twenty five millimetre diametre) |
| 323 | 32 mm dia (thirty two millimetre diametre) |
| 324 | 40 mm dia (forty millimetre diametre) |
| 325 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets also including for cement concrete cradles, and dressing of sides, ramming of bottoms, up to any depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetre) in depth including consolidating each deposited layer with minimum 95% (ninety five percent) by ramming, watering etc. and disposing off surplus excavated soil as directed, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 326 | Providing and fixing cast iron double flanged butterfly valve (PN 16 (Sixteent)) complete with 2 nos. (two numbers) matching flanges, bolts, nuts, 3.0 mm (three millimere) thick compressed asbestos gasket, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 327 | 65 mm dia (sixty five millimetre diametre) |
| 328 | 80 mm dia (eighty millimetre diametre) |
| 329 | 100 mm dia (one hundred millimetre diametre) |
| 330 | Providing, fixing, testing and commissioning of cast iron dual plate type check valve PN 16 rating (sixteen rating) conforming to IS :5312 complete with 2 nos.(two numbers) matching flanges, bolts, nuts, washers 3 mm (three millimere) thick insertion neoprene gasket, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 331 | 80 mm dia (eighty millimetre diametre) |
| 332 | 100 mm dia (one hundred millimetre diametre) |
| 333 | Making connection to existing city water main including excavation, bailing out water and filling back the excavated earth & C.I. water meter chamber cover, cutting & threading the pipe etc. getting approval from concerned authorities, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 334 | Providing and fixing Hydro dynamically balance Flow meter/multi-jet magnetic drive (turbine type) water meter conforming to IS : 2373/ECC/ISO Standard with direct reading dia in Kilo-liter with all internal part in Gun metal or brass, strainer, flanged distance pieces for easy removal, 100 mm dia burden type pressure gauge with isolation cock complete including necessary test certificate for the meter from local municipal authorities, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 335 | 65 mm dia (sixty five millimetre diametre) |
| 336 | 80 mm dia (eighty millimetre diametre) |
| 337 | Constructing brick masonry chamber (for housing valves, meters etc.) 600x600x900 mm (six hundred into six hundred into nine hundred millimetre) size chamber with D.I. cover size 300x300 mm (three hundred into three hundred millimetre) inside with D.I. frame fixed in cement conc. slab. with 7.5 (seven point five) class designation brick work in cement mortar 1:5 (one cement :five fine sand) for valves cement conc. top slab 1:2:4 (one cement :two coarse sand :four graded stone aggregate 20 mm nominal size) necessary excavation, foundation conc. 1:5:10 (one cement :five fine sand :ten graded stone aggregate 40 mm nominal size) & inside plastering with cement mortar 1:3 (one cement :three coarse sand) 12 mm (twelve millimetre) thick finished with a floating coat of neat cement complete as per standard design with FPS bricks, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 338 | Providing, fixing, testing & commissioning of 25mm dia (twenty five millimetre diametre) forged Brass air release valve including all fitting & accessories, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 339 | Providing, laying and jointing light duty non-pressure NP2 class S/S R.C.C. pipes with collars jointing with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including curing, testing of joints etc. complete in all respects, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 340 | 150 mm dia (one hundred fifty millimetre diameter) |
| 341 | 200 mm dia (two hundred millimetre diameter) |
| 342 | 250 mm dia (two hundred fifty millimetre diameter) |
| 343 | 300 mm dia (three hundred fifty millimetre diameter) |
| 344 | Providing and laying 150 mm (one hundred fifty millimetre) thick cement concrete 1:5:10 mix (one cement : five coarse Sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) alround RCC pipe including bed concrete 150 mm (one hundred fifty millimetre) as per standard design, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 345 | 150 mm dia (one hundred fifty millimetre diameter) |
| 346 | 200 mm dia (two hundred millimetre diameter) |
| 347 | 260 mm dia (two hundred sixty millimetre diameter) |
| 348 | 300 mm dia (three hundred fifty millimetre diameter) |
| 349 | Constructing brick masonry rectangular type manhole with sewer bricks conforming to IS 4885 in cement mortar 1 : 5 (one cement : five coarse sand) inside cement plastering 12 mm (twelve millimetre) thick with cement mortar 1 : 3 (one cement : three coarse sand) finished with a floating coat of neat cement, outside plastering with cement mortar 1 : 3 (one cement : three coarse sand) foundation concrete 1 : 4 : 8 mix (one cement : four coarse sand : eight graded stone aggregare 40mm (forty millimetre) nominal size). RCC top slab with 1 : 2 : 4 (one is to four ) mix and making necessary channels in cement concrete 1 : 2 : 4 (one cement : two coarse sand : four graded stone aggregate 20mm (twenty millimetre) nominal size), inside finished with a floating coat ot neat cement including excavation, refilling and disposal of surplus earth as directed by Engineer-incharge complete as per standard design,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 350 | 600 x 600mm (Six hundred into six hundred millimetre) and 600mm (six millimetre) deep with ISI marked Perforated steel fiber reinforced concrete (SFRC) manhole cover and frame having hold fasts (medium duty) 600 x 450 mm (Six hundred into four hundred fifty millimetre) internal . |
| 351 | 900x800mm (nine hundred into eight hundred millimetre) and 900mm (ine hundred millimetre ) deep with ISI marked steel fiber reinforced concrete (SFRC) manhole cover and frame having hold fasts (medium duty). 560 mm (five hundred sixty millimetre) internal diameter. |
| 352 | 1200x900mm (one thousand two hundred into nine hundred millimetre) and 1500mm (one thousand five hundred millimetre )deep with ISI marked steel fiber reinforced concrete (SFRC) manhole cover and frame having hold fasts (medium duty). 560 mm (five hundred sixty millimetre )internal diameter. |
| 353 | Providing Extra depth for rectangular manhole with F.P.S Bricks,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 354 | 600 x 600mm (Six hundred into six hundred millimetre) |
| 355 | 900 x 800mm (Nine hundred into eight hundred millimetre) |
| 356 | 1200 x 900mm (one thousand two hundred into nine hundred millimetre) |
| 357 | Providing orange colour safety foot rest of minimum 6 mm (six millimetre) thick plastic encapsulated as per IS : 10910 on 12 mm (Twelve millimetre) dia steel bar conforming to IS : 1786 having minimum cross section as 23 mm x 25 mm (twenty three into twenty five millimetre) and over all minimum length 263 mm (two hundred sixty three milllimetre)and width as 165 mm (one hundred sixty five milllimetre) with minimum 112 mm (one hundred twelve milllimetre) space between protruded legs having 2 mm (two milllimetre) tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm (one hundred thirty eight milllimetre) as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15 cm (thirty into twenty into fifteen centimetre) cement concrete block 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size) complete as per design, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 358 | Constructing rain water harvesting well of 3000mm dia (three thousand milllimetre) and 5.0m (five metre) (3.0 m ( three metre) effective depth) depth with de-silting chamber of internal size of 2000mm x 1200mm (two thousand milllimetre into one thousand two hundred milllimetre) and 1.5m (one point five metre) depth, with 560 mm dia (five hundred sixty milllimetre) (medium duty) SFRC manhole cover, 01 no. (one number) manhole cover for recharge pit & 01 no. (one number) for desilting chamber, with the operation of earth work in excavation and drilling with RC/DC/ Calyx rig having 200 mm dia (two hundred milllimetre diametre) bore size in all kind of starta except hard rock, back filling with available exavated earth, with necessary compaction and shifting of surplus earth outside by mechanical means as directed by the Project Incharge, PCC 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate), 200mm (two hundred milllimetre) thick foundation concrete, brick work in cement mortar 1:4, (one cement: four coarse sand), PVC coated safty steel foot rest of 12mm dia (twelve millimetre diametre) MS bars grouted rigidly in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 20mm ( twenty millimetre) nominal size graded stone aggregate) @300mm (three hundred milllimetre) c/c & providing 100mm dia (one hundred millimetre diametre) weep holes @ 2.5m (two point five metre) c/c, 150/200 mm (one hundred fifty/two hundred milllimetre) thick RCC tank cover slab in cement concrete M-20 (mix-twenty) i/c providing and placing necessary steel raft. bars, filling in recharge pit 300mm (three hundred milllimetre) thick of 40-65mm (forty to sixty five millimetre) nominal size graded stone aggregate, 300mm (three hundred milllimetre) thick small stone 5-10mm (five to ten millimetre) and 300mm (three hundred milllimetre) thick sand layer respectively as mention in detail drawing, 160mm dia (one hundred sixty millimetre diametre) uPVC slotted pipes 6kg/sq cm (six kilogram per centimetre square) working pressure i/c fittings with a minimum depth as mensioned in recharge pit standard detail drawing. fillling around the slotted pipes and packing 3mm to 6mm (three millimetre to six millimetre) sized graded and screened rounded pea gravel duly washed fabricating and placing grating at the mouth of pipes, 300mm (three hundred milllimetre) thick brick bat layer at bottom of desilting chamber, placing 560mm dia (five hundred sixty millimetre) SFRC manhole cover with frame etc. i/c all necessary materials and equipments required for all relevent operations as shown in the drawing, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 359 | Making connection of storm water line with external (Trunk line) manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (one cement :two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) cement plastered on both sides with cement mortar 1:3 (one cement: three Coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 360 | Providing & laying UPVC pressure pipes of 10 Kg/Sq.cm (ten kilogram per centimetre square) pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth within all leads and lifts complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 361 | 32 mm OD (thirty two millimetre outter diametre) |
| 362 | 40 mm OD (forty millimetre outter diametre) |
| 363 | 50 mm OD (fifty millimetre outter diametre) |
| 364 | 63 mm OD (sixty three millimetre outter diametre) |
| 365 | Providing and fixing cast iron double flanged butterfly valve (PN 16 (Sixteent)) complete with 2 nos. (two numbers) matching flanges, bolts, nuts, 3.0 mm (three millimere) thick compressed asbestos gasket, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 366 | 40 mm dia (forty millimetre diametre) |
| 367 | 50 mm dia (fifty millimetre diametre) |
| 368 | Providing and fixing 25 mm (twenty five millimetre) nominal bore forged brass body quarter turn lever operated ball valve with forged brass hard chrome plated ball, disc & gland packing shall be PTEF tested to 25 Kg/Sq.cm (twenty five kilogram per centimetre square) pressure including GI nipple and threaded hose receiver complete as required, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 369 | Constructing brick masonry chamber (for housing valves, meters etc.) 300x300x600 mm (three hundred into three hundred into six hundred millimetre) size (inside) chamber with D.I. cover size 250x250 mm (two hundred fifty into two hundred fifty millimetre) (inside) with DI frame fixed in cement conc. Slab. with 75 class designation brick work in cement mortar 1:5 (one cement :five fine sand) for valves cement conc. top slab 1:2:4 (one cement :two coarse sand :four graded stone aggregate 20 mm (twenty millimetre) nominal size) necessary excavation, foundation conc. 1:5:10 (one cement :five fine sand :ten graded stone aggregate 40 mm (forty millimetre) nominal size) & inside plastering with cement mortar 1:3 (one cement :three coarse sand) 12 mm ( twelve millimetre) thick finished with a floating coat of neat cement complete as per standard design with FPS bricks, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 370 | Providing and fixing 15 mm dia (fifteen millimetre diametre) forged brass auto air vent valve 10 (ten) PN rating including all fitting & accessories, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 371 | Supply, installation, testing and commissioning of DWC HDPE SN-4 Pipe (Nominal size) IS:16098 part-2 for Storm water Drainage jointed by click ring & sealing ring/ solvent cement joint including testing of joints, setting right the leaking of joints etc. complete as per instructions of the Engineer-In-Charge, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 372 | 150 mm dia (one hundred fifty millimetre diameter) |
| 373 | 200 mm dia (two hundred millimetre diameter) |
| 374 | 250 mm dia (two hundred fifty millimetre diameter) |
| 375 | Providing and laying 150 mm (one hundred fifty millimetre) thick cement concrete 1:5:10 mix ( one cement : five coarse Sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) alround RCC pipe including bed concrete 150 mm (one hundred fifty millimetre) as per standard design, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 376 | 150 mm dia (one hundred fifty millimetre diameter) |
| 377 | 200 mm dia (two hundred millimetre diameter) |
| 378 | 260 mm dia (two hundred sixty millimetre diameter) |
| 379 | Making connection of Sewer water line with external (Trunk line) manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (one cement :two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) cement plastered on both sides with cement mortar 1:3 (one cement: three Coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 380 | Providing orange colour safety foot rest of minimum 6 mm (six millimetre) thick plastic encapsulated as per IS : 10910 on 12 mm dia (twelve millimetre diameter) steel bar conforming to IS : 1786 having minimum cross section as 23 mm x 25 mm (twenty three millimetre into twenty five millimetre) and over all minimum length 263 mm (two hundred sixty three millimetre) and width as 165 mm (one hundred sixty five millimetre) with minimum 112 mm (one hundred twelve millimetre) space between protruded legs having 2 mm (two millimetre) tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm (one hundred thirty eight millimetre) as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15 cm (thirty into twenty into fifteen centimetre) cement concrete block 1:3:6 (one cement :three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size) complete as per design,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 381 | Providing and placing on terrace polyethylene double layer water Storage Tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, out let and overflow pipes but without fittings and the base support for tankincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 382 | ELECTRICAL INSTALLATION PART-II -Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. (One point five square millimetre) PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed heavy clas PVC conduit with modular switch, modular plate, suitable GI box and earthing the light point with 1.5 Sq.mm. (One point five square millimetre) HRFRLS/PVC insulated single core copper conductor cable as required.(Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena & WIres Make: Finolex,Plaza Anchor,Polycab make) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Group C |
| 383 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm (One point five square millimetre) FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit heavy duty ISI marked, and earthing the point with 1.5 sq. mm (One point five square millimetre) FRLS PVC insulated copper conductor single core cable etc as required. including five year warranty Make: Finolex,Plaza,Anchor,Polycab make) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 384 | Wiring for twin control light point with 1.5 sq.mm (One point five square millimetre) FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, 2 (Two) way modular type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. (One point five square millimetre) FRLS PVC insulated copper conductor single core cable etc as required. (Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena & WIres Make: Finolex,Plaza,Anchor,Polycab make) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 385 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed heavy class PVC conduit along with 1 (one) No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Finolex,Plaza,Anchor,Polycab make) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 386 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire ( two into one point five square millimetre plus one into one pint five square milliampere ) |
| 387 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire ( two into two point five square millimetre plus one into one pint five square milliampere ) |
| 388 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire ( two into ofour square millimetre plus one into four square milliampere ) |
| 389 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (Two into six square millimetre Plus one into six square millimetre) |
| 390 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire (Two into ten square millimetre Plus one into six square millimetre) |
| 391 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire ( four into six square millimetre plus two into six square milli ampere ) |
| 392 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire ( four into ten square millimetre plus two into six square milli ampere ) |
| 393 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire ( four into sixteen square millimetre plus two into six square milli ampere ) |
| 394 | Supplying and fixing 5/6 amp ( five oblique six ampere) Modular switch on the existing modular plate and switch box including connections but excluding modular plate etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 395 | Supplying and fixing 15/16 amp ( fifteen oblique sixteen ampere) Modular switch on the existing modular plate and switch box including connections but excluding modular plate etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 396 | Supplying and fixing 3 pin 5/6 amp ( three pin five oblique six ampere) socket outlet on the existing modular plate and switch box including connections but excluding modular plate etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 397 | Supplying and fixing 6 pin 15/16 amp ( six pin fifteen oblique sixteen ampere) socket outlet on the existing modular plate and switch box including connections but excluding modular plate etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 398 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 399 | Supplying and fixing of modular Blanking plate on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd. .Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 400 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required .Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 401 | 1 or 2 ( one or two) Module (75mmX75mm) ( seventy five millimetre into seventy five millimetre |
| 402 | 3 (three) Module (100mmX75mm) (one hundred millimetre into seventy five millimetre ) |
| 403 | 4 (four) Module (125mmX75mm) (one hundred twenty five millimetre into seventy five millimetre ) |
| 404 | 6 (six) Module (200mmX75mm) (two hundred millimetre into seventy five millimetre ) |
| 405 | 8 (eight) Module (125mmX125mm) (one hundred twenty five millimetre into one hundred twenty five millimetre ) |
| 406 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A ( three pin five oblique six ampere) modular socket outlet and 5/6 A (five oblique six ampere) modular switch, connections etc. as required Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 407 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5/6 & 15/16 ( five oblique six ampere and fifteen oblique sixteen ) amps modular socket outlet and 15/16 (fifteen oblique sixteen ) amps modular switch, connection etc. as required.Including five year warranty Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 408 | Supplying and fixing Ding Dong bell suitable for single phase, 230 (two hundred thirty) volts, complete as required Make :-Anchor (Roma classic ),L&T(Entice), Legrand(Myrius) as approved by Er-In-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 409 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V ( two hundred forty volt) on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. But withoutMCB/RCCB/Isolator)including five year warranty .Make:- L&T, Legrand, Hager, ABB (five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 410 | 6 (six) way , Double door |
| 411 | 8 (eight) way , Double door |
| 412 | 12 (twelve) way , Double door |
| 413 | 16 (sixteen) way , Double door |
| 414 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. But withoutMCB/RCCB/Isolator)including five year warranty .Make:- L&T, Legrand, Hager, ABB (five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 415 | 4 (four) way (4 + 12),( Four plus twelve) Double door |
| 416 | 6 (six) way (4 + 18), ( Four plus eighteen) Double door |
| 417 | 8 ( eight) way (4 + 24),( Four plus twenty four) Double door |
| 418 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . But withoutMCB/RCCB/ Isolator) including five year warranty .Make:- L&T, Legrand, Hager, ABB (five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 419 | 8 (eight) way (4 + 24) ( Four plus twenty four) Double door |
| 420 | 12 (twelve) way (4 + 36) ( foru plus thirty six) Double door |
| 421 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required But withoutMCB/RCCB/ Isolator) including five year warranty .Make:- L&T, Legrand, Hager, ABB (five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 422 | Single pole |
| 423 | Double Pole |
| 424 | Triple pole |
| 425 | Supplying and erection Double pole. 40 Amps (forty ampere ) Cat-A. of following rating, double pole 240 ( two hundred forty ) volts, Isolator in the existing MCB DB complete with connections etc. as required:- Legrand/Hager/ ABB/L&T make) as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 426 | Supplying and erection Double pole. 63 Amps ( sixty three ampere ) Cat-A. of following rating, double pole 240 ( two hundred forty ) volts, Isolator in the existing MCB DB complete with connections etc. as required:- Legrand/Hager/ ABB/L&T make) as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 427 | Supplying and fixing following rating, four pole, 415 V ( four hundred fifteen volt) , isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Legrand/Hager/ ABB/L&T make) as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 428 | 40 A/32 A ( forty ampere oblique thirty two ampere) |
| 429 | 63 A ( sixty three ampere) |
| 430 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:- Legrand/Hager/ ABB/L&T make) as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 431 | 25A ( twenty five ampere) |
| 432 | 40A ( forty ampere) |
| 433 | 63A ( sixty three ampere) |
| 434 | Supplying & Fixing of following rating four pole (three phase and neutral) 415 volts, Residual Current Circuit Breaker (RCCB), having a sensitivity current upto 300(three hundred ) milli-amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make:- Legrand/Hager/ ABB/L&T make) as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 435 | 25A(twenty five ampere ) |
| 436 | 40A ( forty ampere) |
| 437 | 63A ( sixty three ampere) |
| 438 | Supplying and fixing 20 A, 240 V, (twenty ampere , two hundred forty volt) SPN Industrial type socket outlet, with 2 ( two) pole and earth, metal enclosed plug top alongwith 20 A ( twenty ampere) \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. For A/C & Kitchen Sockets) Make:- Legrand/Hager/ ABB/L&T make) as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 439 | Supplying and fixing 32 amps, 240 volts, (thirty two ampere , two hundred forty volt) TPN industrial type, socket outlet, with 3 (three) pole and earth, metal enclosed plug top alongwith 32 amps ( thirty two ampere) “C” curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.Make:- Legrand/Hager/ ABB/L&T make) as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 440 | Providing and fixing M.V. danger notice plate of 200x150mm , ( two hundred into one hundred fifty millimetre) made of mild steel at least 2mm ( two millimetre) thick ,vitreous enameled white on both sides ,and with inscription in single red colour on front side as required Make:- Legrand/Hager/ ABB/L&T make) as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 441 | Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 442 | 100 mm width X 50 mm depth X 1.6 mm ( one hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 443 | 150 mm width X 50 mm depth X 1.6 mm ( one hundred fifty millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 444 | 300 mm width X 50 mm depth X 1.6 mm thickness ( three hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 445 | 450 mm width X 50 mm depth X 2.0 mm ( four hundred fifty millimetre width into fifty millimetre depth into two millimetre) thickness |
| 446 | 600 mm width X 50 mm depth X 2.0 mm ( six hundred fifty millimetre width into fifty millimetre depth into two millimetre) thickness |
| 447 | 750 mm width X 62.5 mm depth X 2.0 mm thickness ( seven hundred fifty millimetre width into sixty two p[oint five millimetre depth into two millimetre) thickness |
| 448 | 900 mm width X 62.5 mm depth X 2.0 mm ( Nine hundred millimetre width into sixty two p[oint five millimetre depth into two millimetre) thickness |
| 449 | Supply of following size of perforated pre painted M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 450 | 100 mm width X 50 mm depth X 1.6 mm ( one hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 451 | 150 mm width X 50 mm depth X 1.6 mm ( one hundred fifty millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 452 | 300 mm width X 50 mm depth X 1.6 mm thickness ( three hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 453 | 450 mm width X 50 mm depth X 2.0 mm ( four hundred fifty millimetre width into fifty millimetre depth into two millimetre) thickness |
| 454 | 600 mm width X 50 mm depth X 2.0 mm ( six hundred fifty millimetre width into fifty millimetre depth into two millimetre) thickness |
| 455 | 750 mm width X 62.5 mm depth X 2.0 mm thickness ( seven hundred fifty millimetre width into sixty two p[oint five millimetre depth into two millimetre) thickness |
| 456 | 900 mm width X 62.5 mm depth X 2.0 mm ( Nine hundred millimetre width into sixty two p[oint five millimetre depth into two millimetre) thickness |
| 457 | Supplying and installing following size of perforated HotDipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 458 | 100 mm width X 50 mm depth X 1.6 mm thickness ( one hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 459 | 150 mm width X 50 mm depth X 1.6 mm thickness ( one hundred fifty millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 460 | 300 mm width X 50 mm depth X 1.6 mm thickness ( three hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 461 | 450 mm width X 50 mm depth X 2.0 mm thickness ( four hundred fifty millimetre width into fifty millimetre depth into two millimetre) thickness |
| 462 | Supply of following size of perforated HotDipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 463 | 100 mm width X 50 mm depth X 1.6 mm thickness ( one hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 464 | 150 mm width X 50 mm depth X 1.6 mm thickness ( one hundred fifty millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 465 | 300 mm width X 50 mm depth X 1.6 mm thickness ( three hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness |
| 466 | 450 mm width X 50 mm depth X 2.0 mm thickness ( four hundred fifty millimetre width into fifty millimetre depth into two millimetre) thickness |
| 467 | Providing and fixing 16 mm (sixteen millimetre) M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 468 | Supply, Installation, Testing and Commissioning of 1200(one thousand two hundred ) mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm (thirty centimeter ) long down rod, 2 (two ) nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9 (point nine ) , Service Value (CMM/W) minimum 6.85 (six point eight five ) , Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019(three hundred seventy four to two thousand ninteen ) , THD less than 10%,(ten percent ) remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75(seventy five ) degree C (max.), insulation resistance more than 2 (two ) mega ohm, suitable for 230(two hundre thirty ) V, 50(fifty ) Hz, single phase AC Supply, earthing etc. complete as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 469 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.Make:- AKG , Polycab , BEC Norpack , or its equivalent as approved by Er-In-Charge as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 470 | 20 mm(twenty millimetre ) |
| 471 | 25 mm (twenty five millimetre ) |
| 472 | 32 mm (thirty two millimetre ) |
| 473 | Supplying and fixing of following sizes of heavy class PVC conduit along with accessories insurface/recess including painting in case of surface conduit, or cutting the walland making good the same in case of recessed conduit as required. Make:- AKG , Polycab , BEC Norpack , or its equivalent as approved by Er-In-Charge as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 474 | 20 mm(twenty millimetre ) |
| 475 | 25 mm (twenty five millimetre ) |
| 476 | 32 mm (thirty two millimetre ) |
| 477 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos (two numbers) 3 pin 5/6 A ( three pin five oblique six ampere) modular socket outlet and 2 nos. ( two numbers) 5/6 A ( five oblique six ampere) modular switch, connections etc. as required. (For light plugs to be used in non residential buildings) Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 478 | Supply, installation, testing and commissioning of Din Rail 20A ( twelve ampwere) DP Contactor in existing DB Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 479 | Supplying and fixing of USB Charging socket on the existing modular plate & switch box including connections but excluding modular plate etc. as require Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 480 | Providing and fixing of lightning conductor finial, made of 25 mm ( twenty five millimetre) dia 300 mm ( three hundred millimetr) long, G.I. tube, having single prong at top, with 85 mm ( eighty five millim etre) dia 6 mm ( six millimetre) thick G.I. base plate including holes etc. complete as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 481 | Providing and fixing G.I. tape 20 mm X 3mm (twenty millimetre into three millimatre) thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) including five year warranty as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 482 | Providing and fixing G.I. tape 20 mm X 3 mm (twenty millimetre into three millimatre) thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) including five year warranty as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 483 | Design, fabrication, assembling, wiring , supply , testing , Installation , commissioning, Delivery to site of MV Panels fabricated out of 2mm thick for structural members (Load bearing members) and 1.6mm thick for door and covers (Non load bearing members) CRCA painted sheet steel in cubicle formation with reinforcement of suitable size angle iron, channels, T irons, flats wherever necessary for large meter boards. Cable gland plates shall be provided at top and bottom both and windows for meter reading, locking arrangement (pad-lock & seal) with wiring upto KWH meter & meter to MCB shall be done by using adequately rated flexible single core copper wire. The boards shall be treated with all anticorrosive process before painting as per standards with final approved shade of powder coated as approved, 2 nos. earthing terminals shall be provided for all panels. The boards shall be suitable for 415 V, 3 phase, 4 wire, 50 Hz supply system. Boards shall be fabricated in length, height, depth etc to match with site conditions. An approval shall be taken for each panel before manufacturing. Galvanised hardwares with zinc passivation shall be used in fabrication of boards. Note: The following provisions shall be required to be made in the switchboard detailed below The Switchboard shall have provision for entry of all PVCA cables/bus duct from the top/bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbar insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.Suitable tinned copper extension links for incoming/outgoing cables shall be provided wherever required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 484 | Control circuits includes breaker control switch, auto manual selector switch, anti pumping relay, spring charging trip indication, TIMER, control wiring, Auxiliary contactors MCB’s as required at site Positive isolation of all breakers. All fault level breaking capacity indicates shall be ICS value at 415 volts (ICS = ICU = ICW = 100%) Space Heater/ light/air filter shall be provided for each vertical compartment Padlocking facility shall be provided on all outgoing feeders. All ACB’s shall have all standard accessories such as CT’s, Arc Chute, Safety Shutters etc.All inter Panel wiring from PLC to DG / Transformer / Bus Couplers as required. Link and drops from ACB/MCCB shall be designed for full rated current of ACB/MCCB ratings at same current density as of Main Bus Bar 2 nos. GI earth strip throughout the panel. Terminal Bocks shall be provided for Each O/G in cable alley. No O/G cable shall directly termonate on MCB/ MCCBs Make of LV switchgear : L&T (Lauritz & Knudsen), Schneider , ABB, Siemens. Panel Manufacturer - SPC Electrotec/Supertech Control / Conquerent/LS Power MAIN LT CUM DG SYNCHRONIZATION PANEL All Incomers and Outgoings shall be provided with provision for BMS integration ( ON-OFF & Trip Status) 1000 KVA PACKAGE SUBSTATION INCOMER 1600 amps 4 pole EDO type air circuit breaker with microprocessor release unit for short circuit, over current and earth fault protection with adjustable setting as per specification and with following accessories: 3 Nos. Cast resin CTs Of ratio 1600 / 5 Amps CL:1 ( For Metering) , 5P20( For protection) , 15 VA. R-Y-B indication Lamp , Trip Circuit Healty and Breaker ON-OFF - Trip Indication Lamp Over Voltage relay (59) And Under Voltage relay (27) with time delay Multi Function meter having 30 Days Memory Digital voltmeter with inbuilt selector switch- 1 set Trip Circuit Supervision Relay Master Trip Relay Shunt trip coil. - 1 Set Under voltage release. - 1 Set 1600/5A CT for APFCR Surge protection device Breaker control switch (TNC) Auxiliary contacts required for necessary interlocking of breakers.( 6 No + 6 NC ) Annunciation with test and reset for fault indication 2 kVAR fixed capacitor with MCCB 1 No. 250 amps 25 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps Suitable to accept 4 Nos. 3.5C-300sq. mm Al Arm Cable |
| 485 | 500KVA DG # 1 INCOMER:-800 amps 4 pole EDO type air circuit breaker with microprocessor release unit for short circuit, over current and earth fault protection with adjustable setting and with following accessories: Controller for parallel genset operation (similar to InteliGen 200 of CompAp or equal) 3 Nos. Cast resin CTs Of ratio 800 / 5 Amps CL:1 ( For Metering) , 5P20( For protection) , 15 VA.R-Y-B indication Lamp , Trip Circuit Healty and Breaker ON-OFF - Trip Indication Lamp Over Voltage relay (59) And Under Voltage relay (27) with time delay 1 Nos. Reverse power relay Underpower Relay with Timer - 1 Set Phase Sequence Relay - 1 Set Multi Function meter having 30 Days Memory Trip Circuit Supervision Relay Master Trip Relay Shunt trip coil. - 1 Set 240 V AC under voltage release. - 1 Set Surge protection device Breaker control switch (TNC) Auxiliary contacts required for necessary interlocking of breakers.( 6 No + 6 NC ) Annunciation with test and reset for fault indication with buzzer Engine cranking relay- 1 Set Microprocessor based engine control automatic failure stand by relay including all accessories Three indicating lamps “load on set’, ‘Load on Mains’ and “ Set fail to start’ One 16 amp automatic Battery charger with inbuilt facility of trickle / boost & consisting of : DC Ammeter (0-30) Amp. DC Voltmeter.(0-30) Volt. Charger ON, OFF indications . DG start / Stop push buttons (Illuminated Type) Emergency Stop Push Button Suitable to accept 3 Nos. 3.5C-240sq. mm Al Arm Cable |
| 486 | 500 KVA DG # 2 INCOMER:- 800 amps 4 pole EDO type air circuit breaker with microprocessor release unit for short circuit, over current and earth fault protection with adjustable setting and with following accessories: Controller for parallel genset operation (similar to InteliGen 200 of CompAp or equal) 3 Nos. Cast resin CTs Of ratio 800 / 5 Amps CL:1 ( For Metering) , 5P20( For protection) , 15 VA. R-Y-B indication Lamp , Trip Circuit Healty and Breaker ON-OFF - Trip Indication Lamp Over Voltage relay (59) And Under Voltage relay (27) with time delay 1 Nos. Reverse power relay Underpower Relay with Timer - 1 Set Phase Sequence Relay - 1 Set Multi Function meter having 30 Days Memory Trip Circuit Supervision Relay Master Trip RelayShunt trip coil. - 1 Set 240 V AC under voltage release. - 1 Set Surge protection device Breaker control switch (TNC) Auxiliary contacts required for necessary interlocking of breakers.( 6 No + 6 NC ) Annunciation with test and reset for fault indication with buzzer Engine cranking relay- 1 Set Microprocessor based engine control automatic failure stand by relay including all accessories Three indicating lamps “load on set’, ‘Load on Mains’ and “ Set fail to start’. One 16 amp automatic Battery charger with inbuilt facility of trickle / boost & consisting of : DC Ammeter (0-30) Amp. |
| 487 | DC Voltmeter.(0-30) Volt. Charger ON, OFF indications . DG start / Stop push buttons (Illuminated Type) Emergency Stop Push Button Suitable to accept 3 Nos. 3.5C-240sq. mm Al Arm Cable BUSCOUPLER#2 1000 amps 4 pole EDO type air circuit breaker with-out releases and with following 6 Nos. NO/NC contacts for remote opening & closing Red/Green / Amber / ON/OFF / Trip indicating lamps with 2A SP MCB as backup protection. Backup MCB and terminal blocks as required. TNC Breaker Control switch Required Interlocking with other incomers & Bus Coupler to be provided as per Schematic Diagram |
| 488 | SOLAR:- INCOMER 1 No. 250 amps 25 kA MCCB with Thermal magnetic release unit for short circuit and over current protections.Bus Bar I: 2000A, TPN copper Bus Bar of suitable length having Current density 1Amp/sq.mm & having high conductivity electrical grade suitable to withstand symmetrical fault level of 25 kA. Outgoings section-I 1 No. 500 amps 25 kA 440 volt TP MCCB with microprocessor based overcurrent , short circuit and Earth Fault releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps , Multi function meter with CTs and Control MCBs 1 No. 400 amps 25 kA 440 volt TP MCCB with microprocessor based overcurrent , short circuit and Earth Fault releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps , Multi function meter with CTs and Control MCBs 3 No. 250 amps 25 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps , Multi function meter with CTs and Control MCBs 1 No. 125 amps 25 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps , Multi function meter with CTs and Control MCBs 1 No. 1000 amps TP MDO ACB with -On-Off and Trip Indication Bus Bar II: 1000A, TPN copper Bar of suitable length having Current density 1Amp/sq.mm & having high conductivity electrical grade suitable to withstand symmetrical fault level of 25 kA. |
| 489 | Outgoings section-II:- 1 No. 500 amps 25 kA 440 volt TP MCCB with microprocessor based overcurrent , short circuit and Earth Fault releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps , Multi function meter with CTs and Control MCBs 1 No. 315 amps 25 kA 440 volt TP MCCB with microprocessor based overcurrent , short circuit and Earth Fault releases with heavy duty solid detachable neutral link and complete with on-off-Trip in dications lamps , Multi function meter with CTs and Control MCBs 1 No. 200 amps 25 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps , Multi function meter with CTs and Control MCBs 2 No. 160 amps 25 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps , Multi function meter with CTs and Control MCBs 1 No. 100 amps 25 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and complete with on-off-Trip indications lamps , Multi function meter with CTs and Control MCBs All incoming and outgoing breakers shall be electrically/ mechanically interlocked through a Load Sharing cum Synchronization PLC comprising suitable nos. digital inputs (24 VDC) and output (Relay) for auto operation of DGs as per load requirement. PLC shall be with HMI 1 KVA UPS with 30 mon back up for PLC shall be provided 25kA fault level continuous Earth Bus shall be part of Panel for full length of panel 1 set of 32 amp 4P MCB with wiring upto compartment of D.C.U.'s along with 1 mm sq wire for all RS-485 communication port of KWH meter to D.C.U.'s compartment.Main LT Cum DG Synchronization Panel as described above and complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 490 | 450KVAR CAPACITOR PANEL Incoming : Microprocessor based 16 Step APFC controller shall continuously monitor all three phases and displays various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232C port. It shall have data logging for minimum 2 months, it shall provide output for minimum 14 stages. Bus Bar : 1000A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 25 kA. Neutral busbar shall be of 100% capacity. Capacitor Bank as per following: (All MCCBs (25 kA) shall be thermal Magnetic type ) Capacitor shall be with thyristor , power fuse and 7% detuned reactors of suitable capacity to carry the current with necessary control and firing card with proper wiring 50 KVAR unit 125 amps TP MCCB heavy duty solid detachable neutral link 50 kVAR Thyristorized switch \\"ON\\" / \\"OFF\\" push buttons and indicating lamps. 125 amps rating TP terminal blocks. 7% detuned 50 KVAR mixed dielectric extra low loss type capacitor unit.Auto Manual Selector Switch 6 Set 25 KVAR unit 63 amps TP MCCB heavy duty solid detachable neutral link 25 kVAR Thyristorized switch \\"ON\\" / \\"OFF\\" push buttons and indicating lamps. 63 amps rating TP terminal blocks. 7% detuned 25 KVAR mixed dielectric extra low loss type capacitor unit. Auto Manual Selector Switch 5 Set 15 KVAR unit 40 amps TP MCCB heavy duty solid detachable neutral link 15 kVAR Thyristorized switch \\"ON\\" / \\"OFF\\" push buttons and indicating lamps. 40 amps rating TP terminal blocks. 7% detuned 15 KVAR mixed dielectric extra low loss type capacitor unit. Auto Manual Selector Switch 1 Set 10 KVAR unit 25 amps TP MCCB heavy duty solid detachable neutral link 10 kVAR Thyristorized switch \\"ON\\" / \\"OFF\\" push buttons and indicating lamps. 25 amps rating TP terminal blocks. 7% detuned 10 KVAR mixed dielectric extra low loss type capacitor unit. Auto Manual Selector Switch 1 Set 450KVAR CAPACITOR PANEL as described above and complete as per enclosed SLD |
| 491 | 450KVAR CAPACITOR PANEL Incoming : 1 Nos. 1000 amps 4 pole MDO type air circuit breaker with Multi function meter , ON-OFF & Trip indication lamp Microprocessor based 16 Step APFC controller shall continuously monitor all three phases and displays various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232C port. It shall have data logging for minimum 2 months, it shall provide output for minimum 14 stages. Bus Bar : 1000A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 25 kA. Neutral busbar shall be of 100% capacity. Capacitor Bank as per following: (All MCCBs (25 kA) shall be thermal Magnetic type ) Capacitor shall be with thyristor , power fuse and 7% detuned reactors of suitable capacity to carry the current with necessary control and firing card with proper wiring 50 KVAR unit 125 amps TP MCCB heavy duty solid detachable neutral link 50 kVAR Thyristorized switch \\"ON\\" / \\"OFF\\" push buttons and indicating lamps. 125 amps rating TP terminal blocks. 7% detuned 50 KVAR mixed dielectric extra low loss type capacitor unit. Auto Manual Selector Switch 6 Set 25 KVAR unit 63 amps TP MCCB heavy duty solid detachable neutral link 25 kVAR Thyristorized switch \\"ON\\" / \\"OFF\\" push buttons and indicating lamps 63 amps rating TP terminal blocks. 7% detuned 25 KVAR mixed dielectric extra low loss type capacitor unit. Auto Manual Selector Switch as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 492 | 5 Set 15 KVAR unit 40 amps TP MCCB heavy duty solid detachable neutral link 15 kVAR Thyristorized switch \\"ON\\" / \\"OFF\\" push buttons and indicating lamps. 40 amps rating TP terminal blocks. 7% detuned 15 KVAR mixed dielectric extra low loss type capacitor unit. Auto Manual Selector Switch 1 Set 25 amps TP MCCB heavy duty solid detachable neutral link 10 kVAR Thyristorized switch \\"ON\\" / \\"OFF\\" push buttons and indicating lamps. 25 amps rating TP terminal blocks. 7% detuned 10 KVAR mixed dielectric extra low loss type capacitor unit. Auto Manual Selector Switch Auto Manual Selector Switch 1 Set 450KVAR CAPACITOR PANEL as described above and complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 493 | Main Block Panel -1 Incoming 1 No. 500 amps 16 kA 440 volt TP+NL MCCB with Micro processor based overcurrent , short circuit & E/F releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Metering, Indication & Protection: 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF-Trip indication Lamps R-Y-B indication lamps with MCBs TVSS with MCB shall be provided Bus Bar: 600 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA Outgoings: 1 No. 200 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link & On-off indication lamp 1 No. 100 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and On-off indication lamp 1 No. 80 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and On-off indication lamp 2 Nos. 100 Amps TP + NL MCCB (16 kA) Thermal Magnetic based O/L and S/C release (Ics=100% Icu) with CT operated dual energy meter,On-off indication lamp and complete with CTs , Control MCBs etc as required 6 Nos. 80 Amps TP + NL MCCB (16 kA) Thermal Magnetic based O/L and S/C release (Ics=100% Icu) with CT operated dual energy meter,On-off indication lamp and complete with CTs , Control MCBs etc as required 4 Nos. 40A FP MCB ( Motor Duty) Main Block Panel -1 as described above complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 494 | Main Block Panel -2 Incoming 1 No. 500 amps 16 kA 440 volt TP+NL MCCB with Micro processor based overcurrent , short circuit & E/F releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Metering, Indication & Protection: 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF-Trip indication Lamps R-Y-B indication lamps with MCBs TVSS with MCB shall be provided Bus Bar: 600 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA Outgoings: 1 No. 250 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link & On-off indication lamp 2 No. 125 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and On-off indication lamp 2 Nos. 100 Amps TP + NL MCCB (16 kA) Thermal Magnetic based O/L and S/C release (Ics=100% Icu) with CT operated dual energy meter,On-off indication lamp and complete with CTs , Control MCBs etc as required 3 Nos. 80 Amps TP + NL MCCB (16 kA) Thermal Magnetic based O/L and S/C release (Ics=100% Icu) with CT operated dual energy meter,On-off indication lamp and complete with CTs , Control MCBs etc as required 5 Nos. 40A FP MCB ( Motor Duty) Main Block Panel -2 as described above complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 495 | Main Block HVAC Panel-1 Incoming: 1 No.200 amps 16 kA 440 volt FP MCCB with Thermal Magnetic based overcurrent and short circuit releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamp R-Y-B indication lamps Transient Voltage surge Supression Bus Bars: 250 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA. Outgoing 3 Nos. 40A FP MCB ( Motor Duty) 5 Nos. 63A FP MCB ( Motor Duty) + 63A FP RCCB 300mA 3 Nos. 40A FP MCB ( Motor Duty) + 40A FP RCCB 300mA 1 Nos. 32A FP MCB ( Motor Duty) + 32A FP RCCB 300mA Main Block HVAC Panel-1 as described above |
| 496 | Main Block HVAC Panel-2 Incoming: 1 No.200 amps 16 kA 440 volt TP + NL MCCB with Thermal Magnetic based overcurrent and short circuit releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamp R-Y-B indication lamps Transient Voltage surge Supression Bus Bars: 250 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA. Outgoing 3 Nos. 40A FP MCB ( Motor Duty) 3 Nos. 32A FP MCB ( Motor Duty) + 32A FP RCCB 300mA Main Block HVAC Panel-2 as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 497 | Games Zone Main Panel Incoming: 1 No.250 amps 16 kA 440 volt TP + NL MCCB with Thermal Magnetic based overcurrent and short circuit releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamp R-Y-B indication lamps Transient Voltage surge Supression Bus Bars: 300 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA. Outgoing 2 No. 160 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and On-off indication lamp 1 No. 125 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link and On-off indication lamp 6 Nos. 32A FP MCB ( Motor Duty) Games Zone Panel as described above and complete with Enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 498 | Games Zone HVAC Panel Incoming: 1 No.160 amps 16 kA 440 volt TP + NL MCCB with Thermal Magnetic based overcurrent and short circuit releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamp R-Y-B indication lamps Transient Voltage surge Supression Bus Bars: 200 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA. Outgoing 6 Nos. 63A FP MCB ( Motor Duty) + 63A FP RCCB 300mA Games Zone HVAC' Panel as described above complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 499 | Retail Block Metering Panel Incoming 1 No.315 amps 16 kA 440 volt TP + NL MCCB with Micro processor based overcurrent , short circuit & E/F Releases Metering, Indication & Protection: 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF-Trip indication Lamps R-Y-B indication lamps with MCBs Transient Voltage surge Supression Bus Bar: 400 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 10 kA. Outgoings: 8 Nos. 63 A FP MCB Type C (10 kA) with CT operated dual energy meter and complete with CTs , Control MCBs etc as required 12 Nos. 40 A FP MCB Type C (10 kA) with CT operated dual energy meter and complete with CTs , Control MCBs etc as required 2 Nos. 63A FP MCB ( Motor Duty) 4 Nos. 40A FP MCB ( Motor Duty) 1 Nos. 32A DP MCB ( Motor Duty) 1 No.63 amps TP + NL MCCB with Thermal Magnetic based overcurrent and short circuit releases Retail Block Metering Panel as described above complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 500 | Mezz-1 Floor panel -1 Incoming: 1 No.100 amps 16 kA 440 volt TP + NL MCCB with Thermal Magnetic based overcurrent and short circuit releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamp R-Y-B indication lamps Transient Voltage surge Supression Bus Bars:125 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA. Outgoings: 6 Nos. 32 A DP MCB Type C (10 kA) with direct Dual typr 1-phase energy meter and complete with Control MCBs etc as required 4 Nos. 40A FP MCB ( Motor Duty) 1 Nos. 32A DP MCB ( Motor Duty) Mezz-1 Floor panel -1 Department as described above complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 501 | Mezz-1 Floor panel -2 Incoming: 1 No.125 amps 16 kA 440 volt TP + NL MCCB with Thermal Magnetic based overcurrent and short circuit releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamp R-Y-B indication lamps Transient Voltage surge Supression Bus Bars: 150 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA. Outgoings: 8 Nos. 32 A DP MCB Type C (10 kA) with direct Dual typr 1-phase energy meter and complete with Control MCBs etc as required 5 Nos. 40A FP MCB ( Motor Duty) 2 Nos. 32A DP MCB ( Motor Duty) Mezz-1 Floor panel -2 Department as described above complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 502 | First Floor Panel Incoming: 1 No.250 amps 16 kA 440 volt TP + NL MCCB with Thermal Magnetic based overcurrent and short circuit releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamp R-Y-B indication lamps Transient Voltage surge Supression Bus Bars: 300 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA Outgoing 1 No. 125 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link 2 No. 63 amps 16 kA 440 volt TP MCCB with Thermal Magnetic overcurrent and short circuit releases with heavy duty solid detachable neutral link 16 Nos. 32A DP MCB ( Motor Duty) 7 Nos. 40A FP MCB ( Motor Duty) 1 Nos. 32A FP MCB ( Motor Duty) First Panel (HPSEBL Departmrnt ) in Outdoor double door Type enclosure as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 503 | First Floor HVAC Panel Incoming: 1 No.125 amps 16 kA 440 volt TP + NL MCCB with Thermal Magnetic based overcurrent and short circuit releases Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamp R-Y-B indication lamps Transient Voltage surge Supression Bus Bars: 150 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA. Outgoing Outgoing 5 Nos. 40A FP MCB ( Motor Duty) + 63A FP RCCB 300mA 2 Nos. 32A FP MCB ( Motor Duty) + 63A FP RCCB 300mA First Floor HVAC panel as described above and complete with Enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 504 | Main Block Emergency Panel Incoming: 2 No. 160 amps 16 kA 440 volt FP MCCB with Thermal Magnetic based overcurrent and short circuit releases All Incomer shall be provided with provision for BMS integration ( ON-OFF & Trip Status) Auto Transfer Switch : 160 A, FP Auto Transfer switch (ATS without display) The ATS shall be provided with Silver alloy main contacts which shall be resistant to welding and sticking Indications : 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF TRIP indication Lamps for each Incomer R-Y-B indication lamps 2 Nos. Supply available indication lamp Transient Voltage surge supressor Bus Bars: 200 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA.Outgoing 2 Nos. 40A FP MCB + 40A FP RCCB (300 mA) 2 Nos. 40A FP MCB ( Motor Duty) 3 Nos. 32A FP MCB ( Motor Duty) 5 Nos. 25A FP MCB ( Motor Duty) 3 Nos. 20A FP MCB ( Motor Duty) 2 Nos. 25A DP MCB ( Motor Duty) Floor Emergency Panel as described above and complete as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 505 | Food Court store MDB Wall mounted complete with 100A MCCB as incomer , copper bus bar and 2 No. 40A FP MCB + 1 No. 63A FP MCB as outgoings as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 506 | HVAC Panel-Type-1 1 No. 20 amps TP MCB ( Motor Duty ) with Multifunction meter and DOL starter for 1.1 KW Motor and complete with TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 507 | HVAC Panel-Type-2(In Outdoor Type Enclosure) 1 No. 20 amps TP MCB ( Motor Duty ) with Multifunction meter and DOL starter for 1.5 KW Motor and complete with TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 508 | HVAC Panel-Type-3(In Outdoor Type Enclosure) (2 x 2.25 KW ) INCOMER 1 No. incoming 25 Amps TP+N MCB 1 No. Multi Function Meter with suitable CTs and MCBs 1 Set of RYB indication lamps with control MCB 1 No. of 50 Amps Cu conductor 16kA bus bar duly sleeved as required. OUTGOING 2 No. DOL starter for 2.25 KW Motor Each DOL starter with be complete with TP MCB (Motor Duty) ,TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. HVAC Panel-Type-3(In Outdoor Type Enclosure) as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 509 | HVAC Panel-Type-04 (STP & Pump Room Ventilation) (2 x 2.25 KW ) INCOMER 1 No. incoming 25 Amps TP+N MCB 1 No. Multi Function Meter with suitable CTs and MCBs 1 Set of RYB indication lamps with control MCB 1 No. of 50 Amps Cu conductor 16kA bus bar duly sleeved as required. OUTGOING 2 No. DOL starter for 2.25 KW Motor Each DOL starter with be complete with TP MCB (Motor Duty) ,TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. HVAC Panel-Type-4 as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 510 | HVAC Panel-Type-05 (Emergency Ventilation) (2 x 5.5 KW ) INCOMER 1 No. incoming 40 Amps TP+N MCB 1 No. Multi Function Meter with suitable CTs and MCBs 1 Set of RYB indication lamps with control MCB 1 No. of 50 Amps Cu conductor 16kA bus bar duly sleeved as required OUTGOING 2 No. DOL starter for 5.5 KW Motor Each DOL starter with be complete with TP MCB (Motor Duty) ,TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. HVAC Panel-Type-5 as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 511 | HVAC Panel-Type-06 (Emergency Ventilation) 1 No. 32 amps TP MCB ( Motor Duty ) with Multifunction meter and DOL starter for 5.5 KW Motor and complete with TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 512 | HVAC Panel-Type-07 (Emergency Ventilation) (2 x 1.5 KW ) INCOMER 1 No. incoming 25 Amps TP+N MCB 1 No. Multi Function Meter with suitable CTs and MCBs 1 Set of RYB indication lamps with control MCB 1 No. of 50 Amps Cu conductor 16kA bus bar duly sleeved as required. OUTGOING 2 No. DOL starter for 1.5 KW / 1.1 KW Motor Each DOL starter with be complete with TP MCB (Motor Duty) ,TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. HVAC Panel-Type-7 as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 513 | HVAC Panel-Type-08 AHU Panel 1 Nos. 40 Amps TP MCB with multi function meter with following - Provisions for Installation of 7.5 KW VFDs , Spare NO / NC Contacts for BMS Integration, Looping with Fire Alarm Panel to trip the Fan in case of Fire. - Fully automatic DOL starter for 7.5KW motor and complete with TP MCB (Motor Duty) ,TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. Note: VFD by pass provision / switch shall be provided to use stater in case VFD not working as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 514 | HVAC Panel-Type-09 AHU Panel 1 Nos.32 Amps TP MCB with multi function meter with following - Provisions for Installation of 3.75 KW VFDs , Spare NO / NC Contacts for BMS Integration, Looping with Fire Alarm Panel to trip the Fan in case of Fire. - Fully automatic DOL starter for 7.5KW motor and complete with TP MCB (Motor Duty) ,TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. Note: VFD by pass provision / switch shall be provided to use stater in case VFD not working as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 515 | HVAC Panel-Type-10 (Stores Ventilation Units) (2 x 3.75 KW ) INCOMER 1 No. incoming 40 Amps TP+N MCB 1 No. Multi Function Meter with suitable CTs and MCBs 1 Set of RYB indication lamps with control MCB 1 No. of 50 Amps Cu conductor 16kA bus bar duly sleeved as required. Outgoings 2 Nos.25 Amps TP MCB with multi function meter each with following - Provisions for Installation of 3.75 KW VFDs , Spare NO / NC Contacts for BMS Integration, Looping with Fire Alarm Panel to trip the Fan in case of Fire. - Fully automatic DOL starter for 7.5KW motor and complete with TP MCB (Motor Duty) ,TP Contactor , ON/OFF push buttons and on/off/Trip indicating lights , A/M selector switch for local/remote operations, CT operated Digital Ammeter, suitable NO & NC Potential free contacts, SMPS , DC Relays as required for Interlocking / On-Off on receiving of fire signal from fire control panel / Control Module , O/L relay with inbuilt single phase preventor , selector switches etc as required. Note: VFD by pass provision / switch shall be provided for each starter to use in case VFD not working HVAC Panel-Type-10 as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 516 | Supply, Installation, testing & commissioning of HVAC dedicated VFDs suitable for the following Fan motor capacity (The integration of the VFD with Motor is included in this item) with IP-21 enclosures with Mains disconnect, complying with the tender specifications and having: 'Built-in dual 5% impedance DC link reactor (harmonic filters) on the positive and negative rails of the DC bus of the VFD. 'Built-in EMC Filters (electromagnetic compatibility filters) for VFDs for restriction of conducted emissions to comply with IEC61800: 3 (unrestricted distribution): 2004 Category C 1, for required length of cable between motor & VFD. 'Three-feedback PID (Propotional integrated derivative) controller having capability to simultaneously accept 3 feedback signals from temperature sensors for process optimization and accordingly regulate the speed of the AHUs. 'Automatic Energy Optimization for maximum energy savings. 'The VFD shall be compatible with BMS. 'Rate shall include installation of VFDs in HVAC panels as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 517 | 3.75 KW (THRRE POINT SEVENTY FIVE KILOWATT) |
| 518 | 7.5 KW (SEVEN POINT FIVE KILOWATT) |
| 519 | Supply, erection, testing and commissioning of the following in polycarbonate IP 65 Enclosure as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 520 | 63A FP RCCB( 300 mA) |
| 521 | 40A FP RCCB( 300 mA) |
| 522 | 25/32A FP RCCB( 300 mA) |
| 523 | Supply, erection, testing and commissioning of the following in MS Enclosure as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 524 | 63A FP MCB |
| 525 | 40A FP MCB |
| 526 | 32A DP MCB |
| 527 | 10A/16A/25A/32A FP MCB |
| 528 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 529 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 530 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 531 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 532 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 533 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 534 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV Make :- Dowells ,Comet as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 535 | 2 X 6 sq. mm (19mm) |
| 536 | 2 X 10 sq. mm (19mm) |
| 537 | 2 X 16 sq. mm (22mm) |
| 538 | 3½ X 35 sq. mm (32mm) |
| 539 | 3½ X 50 sq. mm (35mm) |
| 540 | 3½ X 70 sq. mm (38mm) |
| 541 | 3½ X 95 sq. mm (38mm) |
| 542 | 3½ X 120 sq. mm (45mm) |
| 543 | 3½ X 150 sq. mm (45mm) |
| 544 | 3½ X 185 sq. mm (57mm) |
| 545 | 3½ X 240 sq. mm (62mm) |
| 546 | 3½ X 300 sq. mm (70mm) |
| 547 | 4 X 16 sq. mm (28mm) |
| 548 | 4 X 25 sq. mm (28mm) |
| 549 | 4 X 4 sq. mm |
| 550 | 4 X 6 sq. mm |
| 551 | 3 X 4 sq. mm |
| 552 | 3 X 6 sq. mm |
| 553 | 3 X 10 sq. mm |
| 554 | 3 X 16 sq. mm |
| 555 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 556 | 100 mm dia |
| 557 | 150 mm dia |
| 558 | 250 mm dia |
| 559 | Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 560 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 561 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 562 | 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 563 | Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as per IS 7098 (Part-2) 1985 with the latest ammendments of following sizes as required Make :- 3M ,Raychem 240 sq. mm as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 564 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. Make :- 3M ,Raychem 240 sq. mm as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 565 | Supply,Erection,Installation and commissioning of Uniearth maintenance free chemical earthing system consisting of environment friendly ground enhancing compound 'G.E.C' 50kg or as required at site having anticorrosive and hygroscopic properties to replace excavated soil. It should consist of Uniearth copper bonded electrodes, as per site conditions and soil resistivity at various depth levels and different terrains. The electrodes should have coating of 250 microns of molecularly bonded pure electrolytic copper(99.9%) in 2 meter length,17.2 mm diameter,terminal joint 200X25X6mm Cu Strip with exothermic welds. The electrode should be duly tested and certified by CPRI for 30kA short time current test for 1 sec rms as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 566 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make : - Havells , KEI , Polycab or Equal as approved by Er in charge as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 567 | 4CX 6 SQMM AL ARMOURED CABLE |
| 568 | 4CX10 SQMM AL ARMOURED CABLE |
| 569 | 4CX16 SQMM AL ARMOURED CABLE |
| 570 | 3.5CX25 SQMM AL ARMOURED CABLE |
| 571 | 3.5CX35 SQMM AL ARMOURED CABLE |
| 572 | 3.5CX50 SQMM AL ARMOURED CABLE |
| 573 | 3.5CX70 SQMM AL ARMOURED CABLE |
| 574 | 3.5CX95 SQMM AL ARMOURED CABLE |
| 575 | 3.5CX120 SQMM AL ARMOURED CABLE |
| 576 | 3.5CX150 SQMM AL ARMOURED CABLE |
| 577 | 3.5CX185 SQMM AL ARMOURED CABLE |
| 578 | 3.5CX240 SQMM AL ARMOURED CABLE |
| 579 | 3.5CX300 SQMM AL ARMOURED CABLE |
| 580 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Make - Havells , KEI , Polycab or Equal as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 581 | 4CX 6 SQMM AL ARMOURED CABLE |
| 582 | 4CX10 SQMM AL ARMOURED CABLE |
| 583 | 4CX16 SQMM AL ARMOURED CABLE |
| 584 | 3.5CX25 SQMM AL ARMOURED CABLE |
| 585 | 3.5CX35 SQMM AL ARMOURED CABLE |
| 586 | 3.5CX50 SQMM AL ARMOURED CABLE |
| 587 | 3.5CX70 SQMM AL ARMOURED CABLE |
| 588 | 3.5CX95 SQMM AL ARMOURED CABLE |
| 589 | 3.5CX120 SQMM AL ARMOURED CABLE |
| 590 | 3.5CX150 SQMM AL ARMOURED CABLE |
| 591 | 3.5CX185 SQMM AL ARMOURED CABLE |
| 592 | 3.5CX240 SQMM AL ARMOURED CABLE |
| 593 | 3.5CX300 SQMM AL ARMOURED CABLE |
| 594 | Supply and laying of following sizes of XLPE insulated Copper Armoured cable, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and on wall surface as required.Make - Havells , KEI , Polycab or Equal as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 595 | 2CX 2.5 SQMM Cu ARMOURED CABLE |
| 596 | 2CX 4 SQMM Cu ARMOURED CABLE |
| 597 | 2CX 6 SQMM Cu ARMOURED CABLE |
| 598 | 4CX 4 SQMM Cu ARMOURED CABLE |
| 599 | 4CX 6 SQMM Cu ARMOURED CABLE |
| 600 | 4CX 10 SQMM Cu ARMOURED CABLE |
| 601 | 4CX 16 SQMM Cu ARMOURED CABLE |
| 602 | 4CX 25 SQMM Cu ARMOURED CABLE |
| 603 | 3CX 4 SQMM Cu ARMOURED CABLE |
| 604 | 3CX 6 SQMM Cu ARMOURED CABLE |
| 605 | 3CX 10 SQMM Cu ARMOURED CABLE |
| 606 | 3CX 16 SQMM Cu ARMOURED CABLE |
| 607 | Supplying of following sizes of 3 C x 240 Sq.mm XLPE HT cable, XLPE aluminium conductor, corss linked polythylene, individual core screwed, flat steel strip armoured, PVC sheathed cable of 11KV grade (earthed) comforming to IS: 7098 (Part 2),with uptodate ammendment complete as required.Make- Havells , KEI , Polycab or Equal as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 608 | Supplying & laying 1.1 kv grade ISI marked synthetic rubber mats as per specifications of chief electrical inspectorate as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 609 | Supplying & fixing of shock treatment chart printed in hindi and english fitted in wooden frame and glass at front side and hard board at back side as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 610 | Fabricating supplying to site of installation, installation on ceiling/ surface 1.6 mm thick MS Powder coated receways of height 50 mm and 2.0 mm thick openable cover, totally enclosed, the joints between two lengths of channels or between channel and junction box shall be joined together with 3 mm thick GI. Powder coated coupler plates to make it dust and water proof. The cost shall including all supporting and fixing accessories including dash fasteners. (Blue colour for data and Orange colour for power) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 611 | 300 mm (wide) x 50 mm (height) |
| 612 | 200 mm (wide) x 50 mm (height) |
| 613 | 150 mm (wide) x 50 mm (height) |
| 614 | Supply, Installation, Testing, and Commissioning (SITC) of Recessed LED Downlighter, IP20, back-lit type (not side-lit), made of pressure die-cast aluminum housing with front cover of Polystyrene/Polycarbonate/PMMA, system efficacy ≥120 lm/W, system lumen output ≥1500 lm, 6500K CCT, CRI ≥80, SDCM ≤5, using SMD LED of approved brands (Philips/Signify, Osram, Cree, Nichia, Lumileds, Bridgelux, APT, MLS), LED life ≥50,000 hrs @ L70B50. Fixture shall have minimum cutout dia of 150mm, lip width ≥8mm, overall height ≤40mm, and shall be IK02 compliant. Luminaire shall be Class B serviceable. Driver shall be of same make as luminaire, with efficiency ≥85%, PF ≥0.90, THD ≤20%, output ripple ≤4%, surge protection ≥2kV (CM), and shall include open load, short circuit, and overpower protection. Driver shall be CE marked and metal cased. Luminaire and driver shall be BIS registered. Manufacturer must have in-house NABL accredited lab for LM79 (2019), type testing as per IS10322, and IK testing. Reports required prior to supply: LM79 (2019), LM80, Type Test Certificate, and BIS Certificates for luminaire & driver. Branding must be embossed/engraved/screen-printed (no stickers). Make : - Philips , Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 615 | Supply Installation & commissioning of pendant with beautiful light pattern, Aluminium body. The wattage of Luminaire is 1 X 20W. Dimensions in mm Dia. 300x300x1450. Philips HDL Model no. 800033 Vivid or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 616 | Supply Installation & commissioning of pendant with beautiful light pattern, Shiny gold stainless steel & french gold (lampcup in french gold) with cognac glass and clear crystal. chandlier should be of Stainless steel, crystal and glass body. The Chandelier should be have lamp base G9. Dimensions in mm Dia 520 x H 220. Philips HDL Model no. 800065 CHALICE Gold 6-Head or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 617 | Supply Installation & commissioning of pendant with beautiful light pattern ,French gold body with clear glass. The Chandelier should be have lamp base G9 9*Max 28W. Dimensions in mm Dia 82.4 * H42/57/73/88/103/118/134. Philips HDL Model no. 800011 Regalia 9-head chandelier or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 618 | Supply Installation & commissioning of Wall Light with beautiful light pattern, Metal housing with Bronze color finish The Walllight should be have lamp base E27. Dimensions in mm 150x115x227. Philips HDL Model no. 31425 Muzuris or or Equal Wipro , Havells , Bajaj Make approved by the Engineer-in-Charge. |
| 619 | Supply Installation & commissioning of spike light of 12W & 675lm CCT - 3000Khaving Aluminium housing with Black color finish. The Walllight should be LED Integrated. Dimensions in mm L: 131 mm W: 89 mm H: 83 mm Height with spike : 243 mm. Philips HDL Model no. 800139 or or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 620 | Supply, Installation, Testing, and Commissioning (SITC) of 4ft stanalone Suspended 4ft slim Linear LED made of extruded Aluminium with white/black powder coaed finish with high efficiency polycarbonate/PS diffuser and Option of Prismatic Diffuser for Low UGR Rating. The fixture construction shall be H-section construction with LED compartment to be independent from the Driver compartment, the access to the driver should be from the top of the luminaire and not through the diffuser and LED tray to avoid any damage to the diffuser and light leakage.The luminaire shall have a width of not more than 50mm(± 2mm), and shall be available in multiple lengths. LED Used shall be SMD type with approx system Lumens 2500 @21W & efficacy 120lm/W,Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K/5700K/6500K (SDCM<=5), CRI Ra ≥80, PF ≥0.95, THD≤ 10%, an Operating working temp range - 0°C < Ta < 45°C & operating Voltage Range of 140-270 V AC having Class - I protection & serviceability of Class B. Minimum Internal Surge Protection 3.5kV. Current Ripple necessarily <5%. Luminaire with Ingress & IK protection Rating of of IP20 & IK02.The driver shall be compliant to IEC61347-2-13, IEC62384 & IEC6100-3-2. The driver & Luminaire shall be BIS registered. The driver shall be designed for continuous operation of minimum 12-15Hrs a day. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires and must be EMI/EMC compliant. Luminaire manufacturer must have In- house NABL accredited lab in India to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer. The manufacturer shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer. Similar to Signify (Philips) Cat No. SP780 H LED25S-6500 PSU W5L112 OD S1 WH or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 621 | Supply, Installation, Testing, and Commissioning (SITC)of 8ft stanalone Suspended slim Linear LED made of extruded Aluminium with white/black powder coaed finish with high efficiency polycarbonate/PS diffuser and Option of Prismatic Diffuser for Low UGR Rating. The fixture construction shall be H-section construction with LED compartment to be independent from the Driver compartment, the access to the driver should be from the top of the luminaire and not through the diffuser and LED tray to avoid any damage to the diffuser and light leakage.The luminaire shall have a width of not more than 50mm(± 2mm), and shall be available in multiple lengths. LED Used shall be SMD type with approx system Lumens 5000 @ 40W & efficacy 120lm/W,Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K/5700K/6500K (SDCM<=5), CRI Ra ≥80, PF ≥0.95, THD≤ 10%, an Operating working temp range - 0°C < Ta < 45°C & operating Voltage Range of 140-270 V AC having Class - I protection & serviceability of Class B. Minimum Internal Surge Protection 3.5kV. Current Ripple necessarily <5%. Luminaire with Ingress & IK protection Rating of of IP20 & IK02.The driver shall be compliant to IEC61347-2-13, IEC62384 & IEC6100-3-2. The driver & Luminaire shall be BIS registered. The driver shall be designed for continuous operation of minimum 12- 15Hrs a day. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires and must be EMI/EMC compliant. Luminaire manufacturer must have In-house NABL accredited lab in India to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer. The manufacturer shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer. Similar to Signify (Philips) Cat No. SP780 H LED25S-6500 PSU W5L112 OD S1 WH or or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 622 | Supply, Installation, Testing, and Commissioning (SITC) of of Recess mounted office compliant, modular flexible, low glare LED 600mmX600mm fitting made of CRCA Housing with 16 deep inset pyramid optics in 8 modules. Fixture should have minimum efficacy at System level (Not Chip Level) >=120lumens/watt and a minimum system lumen output of 4000 lumens and maximum system wattage of 32W. The fixture shall have highly efficeient beam shape, shall be able to balance vertical & horizontal brightness. Luminaire should have Life of 50000hrs@L70B50 Lumen maintenance @ 45 degree, CCT 4000K/6500K, CRI ≥80, PF ≥0.95 , THD≤10% (at full load) and an operating Voltage Range of 140 - 270, Internal Surge Protection 3KV. Luminaire should have SDCM<5 and modular pyramid recessed optics with UGR<16. The Luminaire shall have the option of modular flexibility for providing different size options. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009. The Luminaire shall have Class B Serviceability, Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to RC600B M LED40S-6500 PSU W60L60 WH or or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 623 | SITC of Magnetic Track Mounted Grid Light LED Module, 9W, black housing, CCT 4000K, with high CRI ≥90 and R9 >50, SDCM ≤5. Luminaire shall be IP20, IK03 rated, and designed for easy and flexible installation to suit various application requirements. Track lighting system shall support three beam angle options – Narrow (16°), Medium (23°), and Wide (36°). Luminaire shall have a system efficacy of ≥100 lm/W and life ≥50,000 hours @ L70B50. Driver Shall be rated for 220–240V, 50–60Hz, and shall be of same make as luminaire. Driver efficiency ≥85%, PF ≥0.90, THD ≤20% @ full load, output ripple ≤4%, and shall include in-built surge protection of 2kV (CM). Driver shall be in metal casing and include protections for open load, short circuit, and overpower. Luminaire and driver shall both be BIS registered. Manufacturer must have in-house NABL accredited lab capable of conducting LM79 (as per 2019), IS10322 Type Tests, and IK tests. FAT as per IS10322 shall be done before dispatch. Successful bidder must submit: NABL accreditation certificate of manufacturer, LM79 report (2019), LM80 from LED OEM, BIS certificate for both luminaire and driver, and Type Test Certificate from NABL-accredited lab. Branding must be embossed/engraved/screen-printed on product (no stickers). approved by the Engineer-in-Charge.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 624 | SITC of Magnetic Track for LED lighting system, with black housing colour, suitable for surface, suspended, or recessed mounting. Track shall be modular and available in multiple sizes and configurable patterns to meet varied application requirements. System shall be compatible with magnetic-mounted LED modules such as grid lights, spotlights, and linear modules. Track and accessories shall be made of high-quality aluminum with appropriate electrical insulation and safety features. Finish shall be durable, corrosion-resistant, and aesthetically matching the lighting modules. System shall be from reputed make such as Signify (Philips/Ecolink) / iGuzzini / Endo or equivalent as approved by the Engineer-in-Charge. as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 625 | Supply, Installation, Testing and Commissioning of 4ft Linear robust LED IP20 batten with inbuilt microwave sensor having minimum system lumen output of 4000 lumens. The minimum system efficacy should not be less than 120 lm/w @6500K. The inbuilt microwave sensor should be able to dim the luminaire 50% in case there is no movement. PIR Sensor should not be allowed. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70B50. The luminaire should have a color temperature of 6500K and CRI>80, SDCM<=5. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The Luminaire should have 4KV surge for better protection against voltage fluctuation/spikes. The luminaire housing should made of polycarbonate extrusion with a High Transmittance PC Diffuser. The total power consumption should not exceed 34W (including driver). Manufacturer shall have inhouse lab approved by NABL or Ministry of Science of Govt of India. Luminaire manufacture shall provide LM79 and LM80 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approval and the certificates must be submitted for records. Make : - Philips , Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 626 | Supply, Installation, Testing and Commissioning of flexible LED strip light for cove lighting, delivering minimum nominal system lumen output of 2000 lumens per meter @ 16W–17W/m, with system efficacy ≥120 lm/W. Strip shall use SMD LEDs with CCT 4000K, CRI ≥80, R9 ≥0, SDCM ≤3, and LED life ≥30,000 hours @ L70B50. LEDs shall be from approved makes: Signify/Philips, Osram, Nichia, Cree, Lumileds, Bridgelux, APT, MLS. Strip shall have minimum 165 LEDs per meter, IP20, IK03 compliant, and supplied in minimum 5-meter rolls. Driver efficiency ≥85%, PF ≥0.90, THD ≤20%, output ripple ≤4%, in- built surge protection 2kV (CM), CE marked, in metal casing, and life ≥50,000 hrs. Shall include protections against open load, short circuit, and overpower. Luminaire manufacturer shall have in-house NABL accredited lab for LM79 (2019), IS10322 Type Tests, and IK tests. FAT to be conducted as per IS10322 before dispatch. Both luminaire and driver shall be BIS registered. Bidder shall submit: NABL lab accreditation, LM79 (2019) report, LM80 from LED manufacturer, BIS certificates (luminaire & driver), and NABL- issued Type Test Certificate. Branding must be embossed/engraved/screen-printed (no stickers). Make: Equivalent to Signify (Philips/Ecolink), iGuzzini, Endo or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 627 | Supply, Installation, Testing and Commissioning of IP54 Rated Deep Recessed low glare LED Downlighter with cut off angle 38° made up of pressure die cast aluminum housing with high quality glossy facetted Al reflector and PDC Aluminium external Rim. The luminaire shall have minimum efficacy at System level approx 120 lumens/watt with system Lumens 750lm & wattage 6W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 3000K/4000K/5700K/6500K,sdcm<=5, CRI Ra >=80, PF ≥0.95, an Operating working temp range 0°C < Ta < 45°C & operating Voltage Range of 140-270 V AC, 50Hz. Minimum Internal Surge Protection 2.5KV, THD≤ 10%. Dimensions: 125mm cut out, OD137mm x 85mm. The beam angle shall be 36deg/60deg.The product shall be with Class B serviceability and shall be RoHS compliant. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. Similar to Philips Cat No. DN590B M LED6S 6500 PSU WH MB or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 628 | Supply, Installation, Testing and Commissioning of architectural suspended ring-shaped LED luminaire with outer diameter of 600mm, width 55mm, height 75mm, made of extruded aluminum housing with single-piece micro-prismatic diffuser.Luminaire shall deliver ≥1800 lumens at ≤30W system wattage, with SMD LEDs of CCT 4000K, CRI ≥80, SDCM ≤5, life≥50,000 hrs @ L70B50, from approved makes (Philips/Signify, Osram, Nichia, Cree, Lumileds, Bridgelux, APT, MLS). Luminaire shall be IP20, IK02, Class I, Class B serviceable. efficiency ≥85%, PF ≥0.90, THD ≤20%, ripple ≤4%, surge protection 2kV (CM), CE marked, in metal casing, and same make as luminaire. Driver to include open load, short circuit, and overpower protection. Both luminaire and driver shall be BIS registered. Manufacturer shall have in-house NABL accredited lab for LM79 (2019), IS10322 Type Tests, and IK tests. FAT as per IS10322 to be done before dispatch. Bidder to submit LM79, LM80, Type Test, BIS certificates, and NABL accreditation before supply. Branding to be embossed/engraved/screen-printed (no stickers). Equivalent to Signify (Philips/Ecolink)/iGuzzini/Endo. or Equal Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 629 | Supply, Installation, Testing and Commissioning of architectural suspended ring-shaped LED luminaire with outer diameter of 900mm, width 55mm, height 75mm, made of extruded aluminum housing with single-piece micro-prismatic diffuser.Luminaire shall deliver ≥4200 lumens at ≤60W system wattage, with SMD LEDs of CCT 4000K, CRI ≥80, SDCM ≤5, life≥50,000 hrs @ L70B50, from approved makes (Philips/Signify, Osram, Nichia, Cree, Lumileds, Bridgelux, APT, MLS). Luminaire shall be IP20, IK02, Class I, Class B serviceable. efficiency ≥85%, PF ≥0.90, THD ≤20%, ripple ≤4%, surge protection 2kV (CM), CE marked, in metal casing, and same make as luminaire. Driver to include open load, short circuit, and overpower protection. Both luminaire and driver shall be BIS registered. Manufacturer shall have in-house NABL accredited lab for LM79 (2019), IS10322 Type Tests, and IK tests. FAT as per IS10322 to be done before dispatch. Bidder to submit LM79, LM80, Type Test, BIS certificates, and NABL accreditation before supply. Branding to be embossed/engraved/screen-printed (no stickers). Equivalent to Signify (Philips/Ecolink)/iGuzzini/Endo.or Equal Wipro , Havells , Bajaj Make aas approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 630 | Supply, Installation, Testing and Commissioning of SITC of architectural suspended ring-shaped LED luminaire with outer diameter of 1200mm, width 55mm, height 75mm, made of extruded aluminum housing with single-piece micro-prismatic diffuser. Luminaire shall deliver ≥5600 lumens at ≤80W system wattage, with SMD LEDs of CCT 4000K, CRI ≥80, SDCM ≤5, life ≥50,000 hrs @ L70B50, from approved makes (Philips/Signify, Osram, Nichia, Cree, Lumileds, Bridgelux, APT, MLS).Luminaire shall be IP20, IK02, Class I, Class B serviceable. efficiency ≥85%, PF ≥0.90, THD ≤20%, ripple ≤4%, surge protection 2kV (CM), CE marked, in metal casing, and same make as luminaire. Driver to include open load, short circuit, and overpower protection. Both luminaire and driver shall be BIS registered. Manufacturer shall have in-house NABL accredited lab for LM79 (2019), IS10322 Type Tests, and IK tests. FAT as per IS10322 to be done before dispatch. Bidder to submit LM79, LM80, Type Test, BIS certificates, and NABL accreditation before supply. Branding to be embossed/engraved/screen-printed (no stickers). Equivalent to Signify (Philips/Ecolink)/iGuzzini/Endo ,Wipro , Havells , Bajaj Make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 631 | EV Charging Station 3.3kw Supplying, installing,testing and commissioning of Electic Vehicle Charging Station Kazam make Model Kazam 3.3, Product Dimensions 27 x 19 x 13.5 cm; 2.02 Kilograms, Item part number KZ001, Manufacturer Part Number KZ001, Material ABS PLASTIC, Colour White, Special Features Convenient to install, All weather and waterproof, Real time data analytics, IOT enabled charging, Wattage 3.3 KW, IP67 certified, Ip (max) 20 Amp, Vp(max) 280 Volts, Input voltage 1 Phase 230 V AC, Connectivity SIM Based, MCB & Fuse YES, Wire 3 wires ( live, neutral and earthing/ 2.5 sq mm), Output connector type 3 Pin socket, Output current 16A max, Output current 3.3KW, theft proof, B/W EVSE & CMS MQTT/TCP, All weather functionality YES Dust & water proof), Number of Outputs 1, Ambient Temperature -30C to 55C, Cooling: Natural including all civil work. (Kazam or equivalent or as approved by the engineer incharge) |
| 632 | Providing ,fixing , testing and commissioning of DC EV CHARGER 60KW As per Bharat EV Specification Connectors: CCS2 Number of plugs: 2 AC input voltage: AC380V±15% AC input frequency: 45-65Hz DC output power: 60KW DC output voltage range: 150 VDC – 1000 VDC DC output current: 0-250 AmpConnectivity authorization: RFID/NFC, App, VIN IP55 *1 year’s warranty *5m cable *4G/Ethernet/Wi-Fi*OCPP 1.6 *7-inch LCD screen/LED light as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 633 | Annual Maintenance service for following panels(As specified above)(a) DG synchronizuing panel & PLC system (b)HVAC Panel-1and 2 Main Block © Main Block Panel -1&2 (d) Games zone main panel & games zone HVAC Panel(e)Mezz Floor-1 Panel-1&2 (f)Retail Block Panel(g)External feeder pillar -1 &2(Refer external Lighting sub head)(h)1st Floor main panel(i) 1st Floor HVAC panel(j)emergency Panel(k) Capacitor Panel(l) external lighting pillar((Refer external Lighting sub head)(m) HVAC starter panel (type 1 to 9)-22Nos.Total Quantity 39Nos.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year (For 2nd Year) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 634 | Annual Maintenance service for following panels(As specified above)(a) DG synchronizuing panel & PLC system (b)HVAC Panel-1and 2 Main Block © Main Block Panel -1&2 (d) Games zone main panel & games zone HVAC Panel(e)Mezz Floor-1 Panel-1&2 (f)Retail Block Panel(g)External feeder pillar -1 &2(Refer external Lighting sub head)(h)1st Floor main panel(i) 1st Floor HVAC panel(j)emergency Panel(k) Capacitor Panel(l) external lighting pillar((Refer external Lighting sub head)(m) HVAC starter panel (type 1 to 9)-22Nos.Total Quantity 39Nos.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC 3rd Year as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 635 | Annual Maintenance service for following panels(As specified above)(a) DG synchronizuing panel & PLC system (b)HVAC Panel-1and 2 Main Block © Main Block Panel -1&2 (d) Games zone main panel & games zone HVAC Panel(e)Mezz Floor-1 Panel-1&2 (f)Retail Block Panel(g)External feeder pillar -1 &2(Refer external Lighting sub head)(h)1st Floor main panel(i) 1st Floor HVAC panel(j)emergency Panel(k) Capacitor Panel(l) external lighting pillar((Refer external Lighting sub head)(m) HVAC starter panel (type 1 to 9)-22Nos.Total Quantity 39Nos.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC 4th Year as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 636 | Annual Maintenance service for following panels(As specified above)(a) DG synchronizuing panel & PLC system (b)HVAC Panel-1and 2 Main Block © Main Block Panel -1&2 (d) Games zone main panel & games zone HVAC Panel(e)Mezz Floor-1 Panel-1&2 (f)Retail Block Panel(g)External feeder pillar -1 &2(Refer external Lighting sub head)(h)1st Floor main panel(i) 1st Floor HVAC panel(j)emergency Panel(k) Capacitor Panel(l) external lighting pillar((Refer external Lighting sub head)(m) HVAC starter panel (type 1 to 9)-22Nos.Total Quantity 39Nos.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC 5h Year as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 637 | Supply, installation, testing and commissioning of following OF 10.0 kVA UPS system with True Online configuration , double conversion type . STS Module & Independent rectifier, inverter& Control for each modules , 3 phase (415 V + 15%) Volts input & 3 phase output (440 V + 1%), 50 Hz, for balance supply and unbalance loads,true on line with double conversation VFI type, TVSS at incoming of UPS, VFD topology with pure sine wave input , Communication Port , Static By Pass switch , Isolation Transformer , Digital Signal processor (DSP )100% IGBT inverter & converter, 15 min battery backup Sealed Maintenance Free lead acid Batteries complete with intercell connectors & copper cables, battery breaker, battery stand / Cabinet with adequate supports to carry the load of the batteries and complete in all respect Cost to include battery stand/rack, interconnecting cables etc.The Rate shall include supplying, erection, testing & commissioning of VRLA-AGM maintenance free Battery 12V SMF batteries for 15 Minutes back up suitable for UPS (Including Battery rack) as required UPS Make :- APC- Schneider / Vertiv -Emerson/ Eaton/Legrand-Numeric SMF Battey Make Exide, Quanta & Panasonic for SMF Batteries. . Warranty Terms : Three Years on UPS & Batteries both with on site service Support as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 638 | Supply, installation, testing and commissioning of following of 6.0 kVA UPS system with True Online configuration , double conversion type . STS Module & Independent rectifier, inverter& Control for each modules , 1 phase (220 V + 15%) Volts input & 1 phase output (220 V + 1%), 50 Hz, for balance supply and unbalance loads,true on line with double conversation VFI type, TVSS at incoming of UPS, VFD topology with pure sine wave input , Communication Port , Static By Pass switch , Isolation Transformer , Digital Signal processor (DSP )100% IGBT inverter & converter, Input harmonic Current THD 3% typical at 100% load, 6% maximum at 50% load and 15 min battery backup Sealed Maintenance Free lead acid Batteries complete with intercell connectors & copper cables, battery breaker, battery stand / Cabinet with adequate supports to carry the load of the batteries and complete in all respect Cost to include battery stand/rack, interconnecting cables etc. The Rate shall include supplying, erection, testing & commissioning of VRLA-AGM maintenance free Battery 12V SMF batteries for 15 Minutes back up suitable for UPS (Including Battery rack) as required complete in all respects and to the best satisfaction of Engineer-in-Charge Make Numeric , APC , Eaton ,vertiv Warranty Terms : Three Years on UPS & Batteries both with onsite service Support as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 639 | Supplying, Erection, testing & commissioning of VRLA-AGM maintenance free battery 12 volt SMF batteries for 30 min. back up VAH of 18000AH extra lead acid battery with thicker tubes suitable for UPS ( including battery rack) as required complete in all respect and to the best satisfaction of Er. in charge. Make:- Exide, Quanta & Panasonic for SMF Batteries as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 640 | S/F Battery 26Ah, 12v(12vx20no. Of 26Ah)(For 10kva UPS) with rack |
| 641 | S/F Battery 26Ah, 12v(12vx20no. Of 26Ah)(For 6kva UPS) with rack |
| 642 | Package Substation Design, fabrication, assembling, wiring , supply , testing , Installation , commissioning, Delivery to site of 11KV / 415V, 1000 KVA outdoor type Unitized Compact Package Substation with facility for internal lighting, earthing, padlocks, Thermosatat, Exhaust Fan etc. Connection between VCB & Transformer will be by 11kV XLPE copper cable/Busbar and connections from Transformer to LT ACB shall be by busbar connections. Cable Termination kits for VCB and ACB etc. (within enclosure and conforming to latest IEC standards) The Complete Substation should be Factory Assembled with access to the Transformer Compartment from either side of the CSS. The Substation should have facility of Detachable Top for the Transformer Compartment to have access to Transformer, incase of any situation / requirement arising for removing the Transformer from the Top alone without disturbing the HT and LT Compartment. The Substation Enclosure should be Weather Proof made up of 2.0 mm (for load bearing members) thickness and 1.6 mm (for non load bearing members) Enclosure with the Base of 4.0mm thickness Hot Dip Galvanised Iron. The Substation should be adaptable for relocation without removing any of its components in case of any change in the Substation Location arising in the future The Enclosure should be Tested for Internal Arc Withstand Capacity as per IEC Compact Substation to be dust and vermin proof, conforming at least to Ingress Protection degree, (outdoor) IP54 for LV/MV Chambers & IP23 for Transformer Chamber.Dual Earthing Bushes shall be provided for Neutral & Earth on either side of the CSS ( Cooper for Neutral & GI/Al for Body) Package Substation shall be complete with following 1 No. 11 kV VCB for 630 KVA Transformer and with following Static type Self Powered IDMT RELAY for Circuit Breakers. The Circuit Breaker shall be provided with Integrated Earthing Switches with Making Capacity Live Cable Indicator Pressure Indicator Padlocking facility Powerpack ( 1W + 1S) complete with all accessories as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 643 | Transformer : 1000 KVA, 11 /0.415 KV, 3 phase, 50 Hz, delta/star connected, step down Oil Type transformers ( ONAN) vector group Dyn-11. On Load tapp changer , RTCC panel with all accesories as required on HV side shall be provided for variation from (+)5.0% to (-)10% in 12 steps of 1.25% each. Cable end box suitable for 3 core 300 Sqmm XLPE Al. conductor 11 KV grade cable on HT side and 6 Nos. 3.5 core 300 Sqmm XLPE Al. Armoured cables on LT side with all fitting and accessories, OTI , WTI alarm and trip wiring complete as required (The transformer shall be subject to all tests as required and test certificates shall be produced).LT INCOMER CUM OUTGOING 1600 A FP Manual Drawout ACB 35KA with microprocessor O/L , S/C and E/F Releases and complete with Multi function meter , CTs , Control MCBs , indication lamp as required suitable arrangement / Links shall be provided for 6 Nos. 3.5 core 300 Sqmm XLPE Al. Armoured outgoing cables 1000 kVA Package substation as described above as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 644 | Design, fabrication, assembling, wiring , supply , testing , Installation , commissioning, Delivery to site of 11 KV Compact 3 way RMU comprising of 2 No. 12KV, 800 A, 25.0 KA for 3 Sec. Mannual Load break switch module and 1 No. 12 KV, 800 A , 25.0 KA for 3 sec Compact Mannual type VCB as outgoing complete with earthing switch, bus bars, interlocking and earth bar and complete with following:1 No. Multifunction meter having 30 days memory and parameters of KW, KWH, KVAH, KVARH power factor, frequency etc.(shall be provided with RS-485 and other communication ports) 1 No. Multifunction meter having 30 days memory and parameters of KW, KWH, KVAH, KVARH power factor, frequency etc.(shall be provided with RS-485 and other communication ports) 3 Nos. double wound, dual ratio C.T.'s 75/5 A Core 1-15VA burden class 0.5 for metering. Core 2-15VA burden class 5P10 for protection 3 nos. line PT 11KV/ √3, 110V/ √3, 100VA class 0.5 epoxy cast resin type. Static type Self Powered IDMT RELAY ( Over current/earth fault relay 50 / 51 / 50N/51N ) for Circuit Breakers. One(1) No. Snap action mech. for manual operation One(1) No. Cable bushings suitable for 630 A One(1) No. Arc proof cable cover complete include interlocking The Ring Switches and Tee-Off Circuit Breaker are provided with Integrated Earthing Switches with Making Capacity Live Cable Indicator for ring switches Pressure Indicator ( Manometer) Padlocking facility HT Danger Plate Make- ABB, L&T , Scheinder 3 Way 11 KV RMU as described above complete in all respects and as per enclosed SLD as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 645 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 646 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 647 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 648 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as requiredas approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 649 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 650 | Supply,Erection,Installation and commissioning of Uniearth maintenance free chemical earthing system consisting of environment friendly ground enhancing compound 'G.E.C' 50kg or as required at site having anticorrosive and hygroscopic properties to replace excavated soil. It should consist of Uniearth copper bonded electrodes, as per site conditions and soil resistivity at various depth levels and different terrains. The electrodes should have coating of 250 microns of molecularly bonded pure electrolytic copper(99.9%) in 2 meter length,17.2 mm diameter,terminal joint 200X25X6mm Cu Strip with exothermic welds. The electrode should be duly tested and certified by CPRI for 30kA short time current test for 1 sec rms. as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 651 | Annual Maintenance srevice for above 1000 kva,11kv/0.415kv compact substationThe above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year (For 2nd Year) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 652 | Annual Maintenance srevice for above 1000 kva,11kv/0.415kv compact substationThe above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year (For 2nd Year) AMC for Third year as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 653 | Annual Maintenance srevice for above 1000 kva,11kv/0.415kv compact substationThe above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC for Fourth year as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 654 | Annual Maintenance srevice for above 1000 kva,11kv/0.415kv compact substationThe above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC for Fifth year as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 655 | Providing, Installing, Receiving, unloading, shifting to Sub-Station, storing, handling, Testing and Commissiong of 'Silent Type' Diesel Generating set alongwith Prime Power Rating 500 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 433V suitable for 50 Hz, 3 phase system & for 0.80 Load Factor DG set shall be as per latest CPCB norms ( CPCB- IV+) DG Set shall consist of the followings as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 656 | Diesel engine 4 stroke radiator Cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 50 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continous operation. The engine will be fitted complete with electronic Governer and all the required accessories. Engine mounted Instrument Panel fitted with and having digital display for following: (i) Start-stop switch with key (ii) Coolant temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication (vi) RPM indication (vii) Over speed indication (viii) Low lub. Oil trip indication (ix) Engine Hours indication (x) Engine protection unit and sensors for winding & bearing temperature monitoring (xi) Remote Monitoring Module Alternator Synchronous alternator rated at 380 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.80 lagging power factor at 50 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having microprocessor based controller with BMS compatibility, SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class-F/H insulation Cable termination Box suitable for 3 Nos. 3.5C-300 Sq. mm Al Arm Cable. Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and antivibration mountings arrangement as per recommendations of manufacturer as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 657 | Fuel Tank: (External) Daily service fuel tank of suitable (900 Litre) capacity fabricated out of 3 mm thick M.S./CRCA sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C' pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Exhaust System: Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor. Starting System: DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 2 x 65 AH, 12V capacity SMF lead acid type) as required as per specifications. Accoustic for weather and noice proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per CPCB-II Norm & technical specifications. Complete one Set Supply, installation, testing & commissioning of 990 litres capacity day oil storage tank fabricated from 6 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator with duly calibrated scale and flanged connection for inlet, outlet, overflow drain and probe provision for level controller & breather.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 658 | Supplying and fixing Exhaust gas piping of 1x200 mm dia. welded black MS, B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/Rockwool, 50 mm thick wire mesh & aluminum cladding etc., as required as per specifications as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 659 | Providing/ Filling diesel in the Existing Diesel Set of Generator as required complete in all respect as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 660 | EARTHING WORKS: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 661 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 662 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 663 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 664 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 665 | Supply,Erection,Installation and commissioning of Uniearth maintenance free chemical earthing system consisting of environment friendly ground enhancing compound 'G.E.C' 50kg or as required at site having anticorrosive and hygroscopic properties to replace excavated soil. It should consist of Uniearth copper bonded electrodes, as per site conditions and soil resistivity at various depth levels and different terrains. The electrodes should have coating of 250 microns of molecularly bonded pure electrolytic copper(99.9%) in 2 meter length,17.2 mm diameter,terminal joint 200X25X6mm Cu Strip with exothermic welds. The electrode should be duly tested and certified by CPRI for 30kA short time current test for 1 sec rms as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 666 | Annual Maintenance srevice for above 500 kva, DG Sets.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra required and one visit in month & emergency visit during warranty period & after to check the whole system & maintain in running condition by authorired person. Add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year (For 2nd Year) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 667 | Annual Maintenance srevice for above 500 kva, DG Sets.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra required and one visit in month & emergency visit during warranty period & after to check the whole system & maintain in running condition by authorired person. Add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC for Third year as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 668 | Annual Maintenance srevice for above 500 kva, DG Sets.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra required and one visit in month & emergency visit during warranty period & after to check the whole system & maintain in running condition by authorired person. Add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC for Fourth yearas approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 669 | Annual Maintenance srevice for above 500 kva, DG Sets.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra required and one visit in month & emergency visit during warranty period & after to check the whole system & maintain in running condition by authorired person. Add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC for Fifth year as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 670 | FIRE ALARM SYSTEM:- Supplying, installation, testing and commissioning of Six Loop Panel micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete Make :- Notifier, Scheinder , Tyco, EST as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 671 | Supply, installation, testing and commissioning of the Network Repeater panel with 640 character back lit LCD display with complete system function keys for programming and control like system reset, Alarm Acknowledge, Alarm Silence, Trouble Acknowledge etc.. The Repeater panel shall be compatible with the FAS system installed as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 672 | Supply, Installation, Testing and Commissioning of intelligent addressable type optical smoke detector incorporate an LED, clearly visible from the outside, to provide indication of alarm or fault actuation with mounting base complete as required. Smoke detectors shall be capable of detecting visible combustion gases emanating from fires. Detectors shall employ the forward light-scatter principle, using optical components operating at a wavelength of 4.35 nm. as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 673 | Supplying, installation, testing & commissioning of responseindicator on surface/recessed MS Box having two LED,metallic cover complete with all connections etc as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 674 | Supply, Installation, Testing and Commissioning of intelligent addressable type heat detector incorporate an LED, clearly visible from the outside, to provide in-dication of alarm or fault actuation.B24 with mounting base complete as required. Detector shall be capable of detecting rapid rise in temperature and fixed absolute tem-peratures. Detectors shall employ two heat sensing elements with different thermal characteristics to provide a rate of rise dependent response.It should also be able work at 55°CELSIUS & 78 °CELSIUS both temperatures , Detector shall include RFI screening and feed-through connecting components to mini-mise the effect of radiated and conducted electrical interferences as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 675 | Supply, Installation, Testing and Commissioning of addressable manual call point to monitor and signal to the control and indicating equipment the status of a switch operated by a resettable/deforamable assembly be capable of operating by means of thumb pressure and not require a hammer. Incorporate a mechanism to interrupt the normal addressable loop scan to provide an alarm re-sponse within less than 3 seconds. Capable of being tested using a special 'key' without the need for depressing the unit. Provide an integral red LED to indicate activation. Call point to include the use of a yellow led to signal fault condition also to have integral isolator as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 676 | Supply, Installation, Testing and Commissioning of addressable sounder with strobe lighting and incorporate an integral line isolator. Be capable of producing a sound output of 103dB at 1m. 16 selectable tones which can be configured using panel configuration software.Hooter shall stop at alarm \\"Acknowledge\\" and the Strobe shall stop at panel \\"Reset\\"as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 677 | Supply ,installation,testing and commissioning of 2 way communication Fire Fighter's handset complete as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 678 | Fire Fighter's Telephone Supply, installation, testing and commissioning of recess/surface mounting intelligent analogue addressable Fire Fighter's Telephone Module/ jack with stainless steel face plates for connections of Fireman's handsets including mounting accessories and complete as per specifications and as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 679 | Supply & laying of 2C-1.5sq. mm grade with copper conductor armoured FIRE SURVIVAL cable with (EPR) Ethylene Propylene rubber insulation as per IEC-60502:2004 Part-1 (Armoured), Retain circuit integrity as per BS-6387 CWZ, BSEN 50200, BS-8434. (armoured), (Resistance to fire at 950º C for 3 hours), as per specifications in cable trays, clamped including anchor fastners to wall with suitable clamps, saddles fixing bolts,2 MS cable glands for each detector back box, complete in all respect as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 680 | Supply, Installation, Testing and Commissioning of Intelligent Addressable Potential-free, Form-C, SPDT contact based control relay module to trigger 3rd party utilities like AHU shut-off, Pressurization fan activation, Special notification activation etc. The contact shall be rated for 2A@24Vdc (Resistive) & 1A@24Vdc (Inductive).as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 681 | Supply, Installation, Testing and Commissioning of Addressable type fault Isolator for isolating shorted, de-linked and loose circuits between two successive fault isolators with automatic resetting arrangement to be interconnecting to loop cable complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 682 | Supply, Installation, Testing and Commissioning of Intelligent Addressable Multi-Sensor (Optical Smoke + Heat) detector with base. . Multi-sensor detector shall have a configuration mode that gives separate alarms for smoke detection and heat detection and shall indicate the cause of alarm (smoke or heat). Also the multi-sensor shall have combined configuration mode of smoke and heat detection that gives only one evaluated alarm from a multi-sensor detector in case of a fire event. as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 683 | Supply, installation, testing and commissioning of intelligent analogue addressable dry contact Monitor Modules to monitor a single device or a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally-open dry-contact devices. The module may also be used to monitor normally-open supervisory devices with special supervisory indication at the control panel. The item cost shall include the cost of surface mounted backbox for fixing of the module, mounting accessories and complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 684 | Supply, installation, testing and commissioning of plug-in type addressable Detector with sounder base . The item shall also include the cost of base plate, mounting accessories etc. and complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 685 | Supply installation Testing & commissioning of UL Listed Mortised Auto aligning Beam Detector with Reflector (Minimm 100 Meter Range), with 50 Event log and Remote Test Facility for each Beam Detector with all mounting accessories , complete with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.alongwith Power supply complete in all respect as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 686 | Supply and Installation of addressable power supply unit ( PSU ) for powering the hooters as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 687 | Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 688 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 689 | Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 690 | Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 691 | Supplying, installation, testing & commissioning of digital audio amplifier 480 Watt, 25V rms operating at 240 volt AC supply complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 692 | Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 693 | Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 694 | Supply & laying and drawing of 1 Pair X 1.5 sqmm 300/500 V grade Plain stranded Copper , Stranded Circular conductor PVC insulated ,Extruded PVC Type inner sheath , Galvanised Steel armouring , Extruded FR-LSH PVC Type outer sheath(Blue) , Aluminium mylar tape colllective screen material speaker armoured cable exposed on wall / ceiling including terminations all labour and material etc complete as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 695 | SUB HEAD 6 - CCTV SYSTEM: Supplying and fixing of following sizes of heavy class PVC conduit along with accessories insurface/recess including painting in case of surface conduit, or cutting the walland making good the same in case of recessed conduit as required. Make:- AKG , Polycab , BEC Norpack , or its equivalent as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 696 | 20 mm |
| 697 | 25 mm |
| 698 | 32 mm |
| 699 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.Make:- AKG , Polycab , BEC Norpack , as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 700 | 20 mm |
| 701 | 25 mm |
| 702 | 32 mm |
| 703 | Supplying and drawing of 1 run of cable UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. Make:- Molex, Belden, Panduit, Systimax as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 704 | Supply, installation, testing and commissioning 4MP Smart Dome Camera, Resolution up to 4MP(2592X1944@25fps), Built-in humanoid detection algorithm, Support low bit rate and low latency H.265 efficient compression, saving bandwidth and storage space Support POE power supply function, Support 3D digital noise reduction, support WDR, Image Sensor 1/2.7\\", progressive scan ultra-low illuminaon CMOS, 3.6 mm Fixed Lens, H.265 efficient compression, saving bandwidth and storage space, Support Smart IR, prevent infrared overexposure at night 30 Mtr IR range, Support POE power supply function, Support 3D digital noise reduction, support WDR, Support ONVIF, Operang Temperature -20°C ~ 55°C Makes :- Siemens ,Bosch ,Honeywell ,Johnson as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 705 | Supply, installation, testing and commissioning 4MP Smart Bullet Camera, Resolution up to 4MP(2592X1944@25fps), Built-in humanoid detection algorithm, Support low bit rate and low latency H.265 efficient compression, saving bandwidth and storage space Support POE power supply function, Support 3D digital noise reduction, support WDR, Image Sensor 1/2.7\\", progressive scan ultra-low illuminaon CMOS, 3.6 mm Fixed Lens, H.265 efficient compression, saving bandwidth and storage space, Support Smart IR, prevent infrared overexposure at night 30 Mtr IR range, Support POE power supply function, Support 3D digital noise reduction, support WDR, Support ONVIF, Operang Temperature -20°C ~ 55°C Makes :- Siemens ,Bosch ,Honeywell ,Johnson as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 706 | Supply, installation testing and commisioning Standalone IVR 80 Ch IVR with 8HDD : Support corresponding channel of face comparison at the same time, Support on-site photo, batch import, export face database, Support face recognition black and white list classification, H.265/H.264 dual stream decoding, embedded Linux operating system, Support synchronous recording, remote monitoring, backup; up to 213CH 1080P video synchronous playback and multi-channel backwords playback, Standard ONVIF, SLINK, RTSP protocol, Support DDNS, EMAIL, UPNP, NTP, P2P and other functions, Support WEB, mobile phone monitoring, client, VMS monitoring, Support external alarm; Two-way audio intercom, Support our Smart IPC: Target Count,Object Le/Lost, Electric Fence, Line Crossing, Face Grouping List, Face Detection, Humaniod Detection, Retrograde Detection Leave Position Detection, Support IPC centralized management, including IPC parameter configuration, information export and import, real-time information acquision and upgrade, etc., Support network monitoring: network traffic, network delay packet loss test, network packet capture backup. Honey well WD101PURP EQUIVALENT IN OTHER MAKES LIKE SONY/ CP Plus. as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 707 | Supply, Installation, Testing and commisioning of core i7 Destop with 8GB RAM 512GB SSD,windows 11,wireless keyboard mouse,minimum 2GB Graphic card and 43\\" LED monitor,Full HD,HDMI port or as required complete in all respect and the best satisfaction of Er.in charge.as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 708 | Supply, Installation, Testing and commisioning of 40\\" inches LCD monitor Make:- LG/Samsung/Sony as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 709 | Supply of 24 port POE Access Switches : 370 W, 24 X 10/100/1000 POE Port Layer 2 Switch with 2 x 1 G uplinks & Stacking module, cable and all other accessories and 3 year support & warrantyMake:- Cisco/Juniper/Quantum/ATI as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 710 | CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator Factory crimped multistranded copper patch cord with tensile strength of > 50N. Conforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 with tensile strength >50N, Number of Insertion upto 2500 Duty Cycle , Color BLUE /GREEN - Data (USER / RACK SIDE) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 711 | CAT6 UTP 24 AWG Patch Cord - 2 mtr with cross separator Factory crimped multistranded copper patch cord with tensile strength of > 50N. Conforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 with tensile strength >50N, Number of Insertion upto 2500 Duty Cycle , Color GREEN - Data (USER SIDE) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 712 | Supply, Installation, testing and commissioning of 24 Port jack Panel as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 713 | Supply of Cat 6 UTP RJ 45 Connectors for CCTV (USER SIDE) - Pack of 100 ConnectorsMake:- Dlink/Molex/Tplink as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 714 | Supply of 19'' 15 U Wall Mount Rack ( with front Glass Lockable Door with PDU) and all other required accessoriesMake:- Comrack/Netrack/Dlink as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 715 | Supply of 19'' 9 U Wall Mount Rack ( with front Glass Lockable Door with PDU) and all other required accessoriesMake:- Comrack/Netrack/Dlink as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 716 | Supply and fixing of 6 core indoor/outdoor OM3 Multimode Optical Fiber of size 50/125μm. Indoor/outdoor rated with U/V stabilized sheath, Tight buffered construction, Attenuation (of cable with fibers) - IEC 60793-1-40 Maximum value of cable at 850 nm ≤ 3.0 dB/km, IEC 60793-2-10 category A1a.2; EN 60793-2-10: ITU Recommendation G.651 , TIA/EIA-492 AAAB, EN 50 173:2002 category OM3 ISO/IEC 11801:2002 category OM3. IEEE 802.3-2002 incl. amendment 802.3ae - 2002. through existing GI/HDPE/ Hume pipe or on cable trays inside the cable duct including all necessary fixing accessories e.g. cable ties, hardware etc. as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 717 | SUB HEAD 7 (LAN, Tel & TV System ) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make- Legrand(Myrius), Schiender(Livia), Anchor Roma(Plus),L&T as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 718 | Telephone socket outlet |
| 719 | TV socket outlet |
| 720 | Supplying, Installation and fixing of CAT6 information outlet meeting or exceeding the channel specifaction of Amendment 1 to ISO/IEC 11801;2002 class EA and ANSI/TIA-568-C.2catergory 6: Conforming have complete solution in all respct and to required to satisfaction of Er. in charge.Make:- Molex/Belden/Panduit/Coming as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 721 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 722 | 1 or 2 Module (75mmX75mm) |
| 723 | 3 Module (100mmX75mm) |
| 724 | 4 Module (125mmX75mm) |
| 725 | TV cable in existing conduiting: Supply & drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/ recessed steel/ PVC conduit as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 726 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.Make:- AKG , Polycab , BEC Norpack , or its equivalent as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 727 | 20 mm |
| 728 | 25 mm |
| 729 | 32 mm |
| 730 | Supplying and fixing of following sizes of heavy class FRLS PVC conduit having wall thickness 2.0mm along with accessories insurface/recess including painting in case of surface conduit, or cutting the walland making good the same in case of recessed conduit as required.Make:- AKG , Polycab , BEC Norpack , or its equivalent as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 731 | 20 mm |
| 732 | 25 mm |
| 733 | 32 mm |
| 734 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.Make:- Molex, Belden, Panduit, Systimax as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 735 | Providing 7 Drawing LAN cable having TIA/EIA 568-D2 CAT6 UTP, CM/CMR rated LS0H cable with support for up to 1000Base-T/TX. UL listed& ETL verified: 23AWG solid bare copper contect resistance 10ohm max. Dielectric strength of 1000v RMS or better in existing PVC conduit /casing caping as required to have compelete solution in all respect as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 736 | Supplying,installation and fixing 2[air multicore telephone cable 0.5 mm as required to have end to end solution complete in all respect as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 737 | CAT6 UTP AWG Patch Cord -UTP LSZH 0.5mtr. 1 mtr with cross separator Factory crimped multistranded copper patch cord with tensile strength of > 50N. Conforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 with tensile strength >50N, Number of Insertion upto 2500 Duty Cycle , Color BLUE /GREEN - Data (USER / RACK SIDE) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 738 | CAT6 UTP AWG Patch Cord - UTP LSZH 2 mtr with cross separator Factory crimped multistranded copper patch cord with tensile strength of > 50N. Conforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 with tensile strength >50N, Number of Insertion upto 2500 Duty Cycle , Color GREEN - Data (USER SIDE) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 739 | Supply , Installation , testing and Commisioning of of 24 Port jack Panel as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 740 | Rack 19'' 42 U Server Rack 800W/1000D( with front VNTD Glass Lockable Door, Back Fully perforated Door, lockable and removable side panels, Castor ,Tyreman,FT brake & Back STD (set of 4), Fan HSG,90 CFM,4 FAN, Vertical Cable Manager, 12 Socket PDU, Stationery Shelf and all other required stationariesMakes:- Comrack/Dlink/Netrack as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 741 | Supply , Installation , testing and Commisioning of of 19'' 15 U Wall Mount Rack ( with front Glass Lockable Door with PDU) and all other required accessoriesMake:- Comrack/Netrack/Dlink as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 742 | Supply , Installation , testing and Commisioning of of 19'' 9 U Wall Mount Rack ( with front Glass Lockable Door with PDU) and all other required accessoriesMake:- Comrack/Netrack/Dlink as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 743 | Supply , Installation , testing and Commisioning of 10 pair Krone Block as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 744 | Supplying, Installation and fixing of 200pair MDF with Krone as required to have complete solution in all respect and to required to satisfaction of Er. in chargeMakes:- Alcatel/ Matrix/ Avaya/ NEC as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 745 | Supplying, Installation and fixing of 50pair MDF with Krone as required to have complete solution in all respect and to required to satisfaction of Er. in chargeMakes:- Alcatel/ Matrix/ Avaya/ NEC as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 746 | Supplying, Installation testing and commissioning of EPBAX with minimum 12CO+ 156 SLT. Extention or asrequired to have complete solution in all respect and to required to satisfaction of Er. in charge Makes:- Alcatel/ Matrix/ Avaya/ NEC as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 747 | Providing and fixing corded phone or as required to have complete solution in all respect and to required to satisfaction of Er. in charge Makes:- Alcatel/ Matrix/ Avaya/ NEC as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 748 | SITC Dual band 802,1tax wireless access point 2*2 MU MIMO dual ports 802.3at POE support with Secure mounting bracket including lifetime warranty and all other required accessories ( Guest inroom Aeras) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 749 | SITC Dual band 802,1tax wireless access point 4*4 MU MIMO dual ports 802.3at POE support with Secure mounting bracket including lifetime warranty and all other required accessories ( Guest inroom Aeras) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 750 | SUB HEAD 8 (External & Façade Lighting ):- Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired. Make:- KEI/Polycab / Havells / Anchor as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 751 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 752 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 753 | Supplying and fixing of following sizes of heavy class FRLS PVC conduit having wall thickness 2.0mm along with accessories insurface/recess including painting in case of surface conduit, or cutting the walland making good the same in case of recessed conduit as required. Make:- AKG , Polycab , BEC Norpack , or its equivalent as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 754 | 20 mm |
| 755 | 25 mm |
| 756 | 32 mm |
| 757 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVMake :- Dowells ,Comet as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 758 | 2 X 6 sq. mm (19mm) |
| 759 | 2 X 10 sq. mm (19mm) |
| 760 | 2 X 16 sq. mm (22mm) |
| 761 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Make : - Havells , KEI , Polycab or Equal as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 762 | 2CX6 SQMM AL ARMOURED CABLE |
| 763 | 2CX10 SQMM AL ARMOURED CABLE |
| 764 | 2CX16 SQMM AL ARMOURED CABLE |
| 765 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Make - Havells , KEI , Polycab or Equal as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 766 | 2CX6 SQMM AL ARMOURED CABLE |
| 767 | 2CX10 SQMM AL ARMOURED CABLE |
| 768 | 2CX16 SQMM AL ARMOURED CABLE |
| 769 | Supplying and installation of outdoor type junction box in Polycarbonate enclosure ( IP 66 ) suitable for 3 Core 16sq. Mm / 10 sq/ mm Al armoured incoming cable and 3 Runs of 2.5 Sqmm FRLS wire as outgoings Make :- Hensel , Clipsal or Equal as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 770 | Supplying and installation of outdoor type box ( IP 55 ) with terminals for external lighting connections suitable 2.5sq. mm / 1.5 sq. mm incoming & outgoing wires Make : -Hensel , Clipsal or Equal as approved by Er In Charge INCOMER 1 No. 160 amps 16 kA 440 volt TPN MCCB with Thermal based overcurrent and short circuit releases with heavy duty solid detachable neutral link complete with Metering, Indication & Protection: 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF-Trip indication Lamps R-Y-B indication lamps with MCBs Transient Voltage surge Supression Bus Bar: 200 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 10 kA.Outgoings 10 Nos. 32 A DP MCB Type C (10 kA) with direct Dual type 1-phase energy meter and complete with Control MCBs etc as required 1 No. 40 amps 4P MCB (10KA) 1 No.32 amps 4P MCB 1 No. 40 Amps 4P MCB (10KA) with 40A FP contactor, 0-24Hr astronomical timer 1 No. 32 amps 2P MCB (10KA) 1 No. 40 Amps 4P MCB (10KA) with 3 Nos. 40A DP RCCB (100mA), 40A DP contactor, 0-24Hr astronomical timer and 18 No. 10 A SP MCB as outgoings (6 Nos./Phase- Total 18 O/G) and neutral link. 1 No. 80. amps 16 kA 440 volt TPN MCCB with Thermal based overcurrent and short circuit releases with heavy duty solid detachable neutral link complete with Energy meter & On-OFF indication lamps INCOMER 1 No. 125 amps 16 kA 440 volt TPN MCCB with Thermal based overcurrent and short circuit releases with heavy duty solid detachable neutral link complete with Metering, Indication & Protection: 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF-Trip indication Lamps R-Y-B indication lamps with MCBs Transient Voltage surge Supression as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 771 | Bus Bar: 150 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 10 kA. Outgoings 10 Nos. 32 A DP MCB Type C (10 kA) with direct Dual type 1-phase energy meter and complete with Control MCBs etc as required :-1 No. 40 amps 4P MCB (10KA) 2 No.25 amps DP MCB (10KA) 1 No. 40 Amps 4P MCB (10KA) with 40A FP contactor, 0-24Hr astronomical timer 1 No. 32 amps 2P MCB (10KA) 1 No. 40 Amps 4P MCB (10KA) with 3 Nos. 40A DP RCCB (100mA), 40A DP contactor, 0-24Hr astronomical timer and 18 No. 10 A SP MCB as outgoings (6 Nos./Phase- Total 18 O/G) and neutral link. INCOMER 1 No. 63 amps 16 kA 440 volt TPN MCCB with Thermal based overcurrent and short circuit releases with heavy duty solid detachable neutral link complete with Metering, Indication & Protection: 1 Nos. Multi Function Meter with 3 Nos. Cast Resin CTs and MCBs Breaker ON OFF-Trip indication Lamps R-Y-B indication lamps with MCBs Transient Voltage surge Supression Bus Bar: 100 A, TPN Copper Bus Bar of suitable length & having high conductivity electrical grade suitable to withstand symmetrical fault level of 10 kA. Outgoings 1 No. 40 amps 4P MCB (10KA) 2 No.25 amps DP MCB (10KA) 1 No. 40 Amps 4P MCB (10KA) with 3 Nos. 40A DP RCCB (100mA), 40A DP contactor, 0-24Hr astronomical timer and 18 No. 10 A SP MCB as outgoings (6 Nos./Phase- Total 18 O/G) and neutral link. External Lighting Feeder Pillar(Retail Area) as described above complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 772 | Supply of 800 MM Long Decorative type C Type Diffuser IP65 LED Bollard 11 Watt 1100 Lumens 4000 K, PF ≥0.95, THD ≤10%, Housing made of extruded aluminium, Input Voltage Range 140-280 V, 3 KV Inbuilt Surge Protection. Ref Make : Wipro, Philips Color Kinetics, LT. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Similar to LB19-131-XXX-40-08 of Wipro or Equal Philips/Bajaj/Havells as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 773 | Supply of 10 Watt IP65 with IK06 and toughend glass protection, housing made of Extruded aluminum housing duly pure polyester powder coated Dark gray color , Designed and manufactured to comply with IS 10322 part 5/Sec 1 2012 . Ref Make : Wipro, Philips Color Kinetics, LT.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Similar to LF39-131-XXX-30-Xx of Wipro or Equal Philips/Bajaj/Havells as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 774 | Supply of 60 Watt , IP66 Bush Light 4000 K, PF ≥0.95, Housing made of Pressure die cast aluminium with toughend glass protection, Input Voltage Range 140-280 V, 3 KV Inbuilt Surge Protection. Beam Angle is 36 Degree.Ref Make : Wipro, Philips Color Kinetics, LT.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Similar to LP16-931-SYM-XX of Wipro or Equal Philips/Bajaj/Havells as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 775 | Supply of 40Watt LED Linear Washer 1000 MM Long IP66, IK06 Protection with Toughend Glass Protection, Extruded aluminum housing & PDC End cap duly pure polyester powder coated in dark grey (RAL7021), Beam angles – Symmetric & Asymmetric. CCT 3000 K. Ref Make : Wipro, Philips Color Kinetics, LT.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Similar to LF01-361-040-30-G1 of Wipro or Equal Philips/Bajaj/Havells as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 776 | Supply of 250mm Dia X 90 mm Height 3000K LED Inground light with Non- Integral driver & completely made in India luminaire. The luminaire’s shall be made of Aluminum die cast housing duly Powder coated. The complete luminaire has IP67 & IK10 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 36W and shall deliver 1800 lumens. Beam angle of the Luminaire shall be 60 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000 burning hours at L70. Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make. Wipro make - LI20-361-60-30-G2 . Ref Make : Wipro, Philips Color Kinetics, LT.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.LI20-361-030-30-G2 of Wipro or Equal Philips/Bajaj/Havells as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 777 | Supply of Isolated, constant Voltage type 240 W LED Driver enclosure in Extruded Aluminium metal enclosure . Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 140V to 300V AC(nominal rated voltage – 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal Shutdown protection. Ref Make : Wipro, Philips Color Kinetics, LT. as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 778 | Supply of 16mmX16mm of 5 meters length 3000K Flexible strip led light with Non- Integral driver.The luminaire’s shall be made of Silicon extrusion with high-efficiency, high grade appearance, soft bend flexibility & Option of Top bend , the same shall be so designed with completely made in India luminaire. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP67 protection. No need external decoder.The LEDs shall have minimum CRI ≥80 (White Light)& shall have SDCM≤5. The luminaire shall have system wattage of 14 Watt/meter and shall deliver 714 lumens. Fixture shall operating temperature range of 0°C to 45°C. The fixture shall have an Non integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. Bidder shall submit the following reports along with technical bid LM79 report of the family of luminaire issued by NABL accredited lab, LM80 issued by LED manufacturer BIS certificate for LED Luminaire. Brand name shall be embossed / printed on each an every light fixtures.Wipro make - LF27-14-TB16-30-G1 Ref Make : Wipro,Philips Color Kinetics, LT.including carriage of material by mechanically & manual as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 779 | Supply of Isolated, constant Voltage type 120 W LED Driver enclosure in Extruded Aluminium metal enclosure . Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 140V to 300V AC(nominal rated voltage – 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal Shutdown protection. Ref Make : Wipro, Philips Color Kinetics, LT as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 780 | 4meter long having 114mm dia at bottom and 60mm dia at top as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 781 | SOLAR POWER GENERATION SYSTEM Supplying, Installation, Testing and Commissioning of grid interactive roof top solar photo voltaic power generation system confirming to MNRE specifications as amended, consisting of mono-Crystalline silicon Solar cells, Power conditioning unit (PCU), Bi-directional net metering facility as per state DISCOM (Distribution Company) requirement, necessary protections against surge and lighting, array junction box & main junction box with IP 67 protection, connections & interconnections, sufficient number of earthing, mounted on Aluminium/ HDGI (Hot Dipped Galvanised Iron) structure of suitable strength with following components as required. Makes: Anchor panasonic/ Adani/Tata Power A) Solar Panel: Solar Photovoltiac Module manufactured in India, confirming to IS 14286/IEC 61215, IS/IEC 61730 Part-I, IS/IEC 61730 Part-2, Photovoltiac Module conversion efficiency shall not be less than 20%. PV module used in solar power plant/system must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and not less than 84% at the end of 25 years. Solar panel should be of minimum 540 watt power with atleast 12 year of product warranty and total warranty of 25 years. Makes: Anchor panasonic/ Adani/Tata Power B) DC Cables: Solar DC Cable- 4 sqmm , Single core CU Unarmoured - HRFR grade with IS 694:2010 (MPPT Output to IPMS/SMPS) including laying with CU lugs, cable ties, PVC tapes, Clamps, MS L bend and other ancillaries- For 75 Kwp solar solution. Make:Finolex/ Polycab/KEI \\"C) AV cables and accessories: MPPT to IPMS/SMPS- Cables to be of HRFR grade with IS 694:2010 -(Makes: Polycab/ KEI/Finolex). All other cables needs to be HFLS/ 2PFG 1169/08.2007 PVI-F (Makes: Polycab/KEI/ Finolex/)\\" D) DC Distribution Box: As per Inverter specs with SPD, Fuse and seperators. Make: Elmex, Phoenix, 1000V E) AC Distribution Box: As per Inverter specs with MCb. |
| 782 | Makes: L&T, Anchor, Schneider, 1100V with SPD F) Earthing Set: Earthing arrestor along with 250 micron Cu bonded (UL Listed) Electrodes 14 mm dia, 3 meter length and 20 kg backfill compund (GEM- Ground enhancing Material) clamped with Cu bonded clamp (150 mmx50 mmX6 mm) and insulated Copper Earth wire 6Sqmm. Earth resistance of <2 ohm G) PV Inverter: Solar PV ON GRID Inverter 50kW or multiple inverters of total 50kW capacity with 10 years of ON SITE warranty- MPPT Technology. H) Lightning Arrester: Copper LA with 50mtr radius I) Terms & Conditions: 1) Inverter and Panels should be of same make. 2) Minimum on-site replacement warranty of 10 years for inverter. 3) Solar panel should be of minimum 540 watt power with atleast 12 year of product warranty and total warranty of 25 years. 4) The panel performance should not be less than 84% after 25 years 5) Wind load of panels should be atleast 3600 PA (Pascal) as per lab document and certificate should be provided during Installation. 6) Junction box of solar panel should be of IP67. 7) Frame of module should be minimum of 40 mm thickness. 8) Maximum temperature coefficient of power should be 0.33 % / degree celcius. 9) Module mounting structure with minimum 2 mm thickness in section size of 80 mm * 40 mm with SS nut bolts. as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 783 | VRF SYSTEM :- Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%,3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. ALL FLOOR AC as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 784 | Supply, installation, testing and commissioning of 4.0 TR following minimum capacity 4/1-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 785 | Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 786 | 1.3 TR |
| 787 | 1.65 TR |
| 788 | 2.0 TR |
| 789 | Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.Mid Static Ductable units (minimum 45 pascal external static pressure) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 790 | 2.6 TR |
| 791 | 3.4 TR |
| 792 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 793 | 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 794 | 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 795 | 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 796 | 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 797 | 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 798 | 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 799 | 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 800 | 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 801 | 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 802 | 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 803 | 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 804 | 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 805 | Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 806 | Thickness 0.63 mm sheet |
| 807 | Thickness 0.8 mm sheet |
| 808 | Thickness 1.0 mm sheet |
| 809 | Thickness 1.25 mm sheet |
| 810 | Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 811 | Thickness 0.63 mm sheet |
| 812 | Thickness 0.8 mm sheet |
| 813 | Thickness 1.0 mm sheet |
| 814 | Thickness 1.25 mm sheet |
| 815 | Supply, installation, testing and commissioning of Gl volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.Gl volume control duct damper as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 816 | Supplying & fixing of powder coated extruded aluminium Supply / Fresh Air Grills with aluminium volume control dampers as per specifications as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 817 | Supplying & fixing of powder coated extruded aluminium Return / Exhaust Air Grills with louvers but without volume control dampers complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 818 | Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 819 | Supplying, fixing testing commissioning of Return air diffusersof powder coated aluminium without volume control dampers with anti smudge ring & removable core as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 820 | Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 821 | Fire Damper |
| 822 | Actuator |
| 823 | Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 824 | Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 825 | 19 mm |
| 826 | 25 mm |
| 827 | Providing and Fixing Canvas Connection of Fire Retardant and non porous double layer material between each indoor units and ducts, Between Ventilation Units and Ducts as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 828 | Supply Instalaltion, testing & commissioning of Y-joints/ T Joints / refnets as per the machine requirement and manufacturer recommendation as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 829 | Supply , Installation , testing and comissioning of Air Cooled Split airconditioners each comprising an outdoor unit consisting of hermetic scroll compressor, air cooled condensing unit, Condenser fan etc. with outer casing and indoor fan coil unit(s) consisting of centrifugal fans, fan motor, DX cooling coil, outer casing, filter, control and power panel with remote control etc. both inter connected with copper refrigerant pipe and drain pipe of required length as given, cabling and wiring (priced separately in Electrical Tender), insulation with Closed Cell nitrile foam, full charge of refrigerant gas and oil, M.S. base frame, supports etc. complete as per specifications and drawings. The cost shall also include angle iron stands for outdoor units as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 830 | 1.0 TR Unit |
| 831 | 1.5 TR Unit |
| 832 | 1.5 TR Unit ( 1 working + 1 standby with duty timer for duty cycling) |
| 833 | Supply , Installation , Testing And Commissioning of Ceiling Suspended Type air unit double skin type of extruded aluminium section with 0.6 mm preplasticized/precoated GI sheet outside and 0.6 mm plain Galvanized sheet inside, complete with 25 mm thick insulated panels pressure injected with PUF insulation of 40 kg/m3 density, forward curved blower, 6RD cooling coil section with DX coil, filter section with MERV 8 & MERV 13 Filters , fan motor, drive set, mounting base damper etc. suitable for outdoor application as per specifications and drawings.including all necessary fittings and accessories. 6000 CFM Ceiling suspended type AHU with 12.0 Sqft Filter Area at 30 mm Static Pressure (External) - 3.75 KW motor connected with 20 HP ODU (Note: ODU is to be priced separately) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 834 | Supply , Installation , Testing And Commissioning of Floor Mounted Type air unit double skin type of extruded aluminium section with 0.8 mm preplasticized/precoated GI sheet outside and 0.8 mm plain Galvanized sheet inside, complete with 25 mm thick insulated panels pressure injected with PUF insulation of 40 kg/m3 density, forward curved blower, 6RD cooling coil section with DX coil, filter section with MERV 8 & MERV 13 Filters , fan motor, drive set, mounting base damper etc. suitable for outdoor application as per specifications and drawings.including all necessary fittings and accessories.The Unit price shall also include the cost of AHU Controller to link the unit with VRF ODU Air Handling Units (Floor Mounted Type - Vertical) 20400 CMH / 12000 CFM , 6 RD , 30 MM ESP (mm H2O) (Appx 30 TR/ 40 HP). Connected to 40 HP ODU circuit (priced separately) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 835 | Supply, Installation, Testing and Commissioning of Dry Type Scrubber each comprising of extract air intake section, electrostatic precipitation technology, dry type air cleaner to remove oil, smoke and fumes from exhaust air, as per the Specifications. Electrostatic section shall be made of 16 gauge galvanised sheet, high bake epoxy powder coated, washable type aluminium mesh filters, stainless steel spiked ionizers to create high voltage DC field, aluminum collector plates which should be alternatively charged positive and negative with large collecting area with 14\\" deep cell, to work as magnet for charged smoke and oil particles. Average efficiency of 90-95% in single pass as per ASHRAE test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell should be of permanent type and incorporate slide out facility for easy removal for cleaning. Power supplies shall be 100% solid state UL Listed, Module of capacity above 3000 CFM shall be equipped with Pulse width modulating (PWM) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 836 | The system should be fitted with interlock switch for safety . The system should allow connection to a fan section to achieve 500 FPM velocity across the air Operating Voltage : 220V, 50 Hz Ionizing Voltage : 12.5 to 13 KVDC Collector Cell Voltage : 6 to 6.5 KVDC Power Consumption : Not more than 50W per cell. Capacities :5000 CFM min eff : 90% DIDW Blower DIDW Blower, motor, V belt drive, A.V mounting, supports etc. as per Specifications & Drawings Casing Factory fabricated Double Skin construction shall have 25 mm thick PUF injected Panels having density 40Kg/Cum with 0.8 mm pre-plasticized /pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside and fixed on 30x30 mm hollow extruded aluminium section. Casing shall be appropriately housed both Electrostatic Modules and Fan with Drive. Note: The Dry Scrubber shall be a single unit with 1x5000 CFM Dry Scrubber and DIDW Blower (enclosed in a single body) Accessories The cost shall include all accessories like Adjusting motor brackets,base,vee drive belt & pulleys, vibration isolators, internal frame works ,canvas connection, Inlet/Outlet flange connection etc Outdoor Type Floor Mounted With Rain Water Protection Canopy 5000 CFM ( with Backward Curved DIDW Blowers) 3.75 KW Motor ; SP 60 mm(Total) of wg; as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 837 | Supply,Installation,Testing and Commissioning of Double Skin Packaged Type Air Washer with extruded aluminium section with 0.8 mm preplasticized/precoated GI sheet outside and 0.8 mm plain Galvanized sheet inside, 40 mm thick PUF insulation of 40KG/m3 , G.I. blower section, DIDW Blower (Backward Curved) with motors , base , drive arrangement ,Filter, cooling pad section, stainless steel 304 sump tank and housing, 4 bend PVC drift eliminators, water circulation pump (1W+1Standby), valves including isolation valves for pumps, piping & fittings etc. as per specifications and drawings . The complete unit shall be installed on neoprene pad vibration isolators. Outdoor Type Floor Mounted With Rain Water Protection Canopy 5000 CFM (with Backward Curved DIDW Blowers 3.75 KW Motor ; SP 50 mm of wg; as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 838 | Supply , Installation, testing & commissioning of 1377 CFM (connected with 10 HP ODU ) factory fabricated Outdoor Air Proceesing units of following capacities equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, insulation, pipe connections, corded/ cordless remote control etc. of various capacities as per specifications and drawings. Rates of ODU's and interconnecting refrigerant piping to be quoted seperately. The unit shall be installed with Spring vibration isolators of suitable rating as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 839 | Supplying, Installing, Testing and Commissioning of AMCA Certified (Air perfromance) Vane Axial flow fan for exhaust suitable for Horizontal/Vertical installation. The motor shall be suitable for 415±10%, three phase. The SP of the fan should be checked by vendor and motor should be selected accordingly prior to award of contract. The fans shall have GI weldmesh inlet guard, back draft dampers etc. as part of unit prices. Thickness of the casing shall not be less than: For Dia (300 to 650) mm – 2mm, Dia (700 to 1140) mm – 3 mm, Dia (1200 to 1400) mm – 4mm & Dia 1600 – 5 mm. The Fans shall be installed with vibration isolators of suitable rating For all Fire Rated Fans as mentioned, Fan and Motor shall be suitable for operation at minimum 250 deg C for 2 hrs. Certificate of conformity for 250 deg for 2 hours operation as per BSEN 12101-3 : 2015 issued by Internationally recognized Independent Fire Laboratory (TUV SUD Singapore/UL/CE) should be submitted alongwith type test report as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 840 | All the fans shall be AMCA Certified/Equivalent for air. The outlet velocity of normal exhaust/ fresh air fans should not exceed 16m /s The sound level of fans should be within 65 dB for fans <8000 CFM 75 dB for fans between 8000-20000 CFM and within 80 db for fans between 20001-40000 CFM and within 83 db for fans >40000 CFM. Db level to be measured at 3m distance.(unless specified in line item) The motors shall be with IE-2/IE-3 Effeciency and suitable to operate through VFD if required. EFF> 85% for Motor >3HP, EFF>78% for Motor <3HP All Exhaust / Fresh Air fans shall have back draft dampers inbuilt in the cost of the fan The efficiency of all fans should be > 65%.preference to fans with > 70% eff will be given The pole for this fan should be suitably selected to meet all parameters as mentioned above.The RPM, dia. should be selected suitably to match the KW, Efficiency and Noise Requirements. All ceiling suspended fans shall have spring type vibration isolator of suitable ring as part of unit price. All floor mounted fan shall have spring type vibration isolators of suitable rating as part of unit price as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 841 | 5000 CFM; SP 10 mm of wg; Power 1.5 KW for Fresh Air (Axial ) (Fire rated) (Mezannine 01) |
| 842 | 4000 CFM; SP 10 mm of wg; Power 1.1 KW for Smoke Extraction (Axial ) (Fire rated) (Mezannine 01) |
| 843 | 6000 CFM; SP 10 mm of wg; Power 1.5 KW for Liftwell Pressurisation (Axial ) (Non Fire rated) |
| 844 | 17000 CFM; SP 10 mm of wg; Power 5.5 KW for Smoke Extraction Fresh Air (Axial ) (Fire rated) (Game zone) |
| 845 | 6000 CFM; SP 10 mm of wg; Power 1.5 KW for Smoke Extraction Fresh Air (Axial )(Fire rated) (Guest Room Floor) |
| 846 | 6500 CFM; SP 20 mm of wg; Power 2.25 KW for Pump Room Exhaust / Fresh Air (Axial ) (Non Fire rated)(Pump/ Room/ STP) |
| 847 | Supply, Installation, Testing and Commissioning of Double Skin Type AHU Fan section with 0.8 mm preplasticized/precoated GI sheet outside and 0.8 mm plain Galvanized sheet inside with 25mm injected PUF insulation of 40KG/m3 , G.I. blower section, DIDW Blower ,Filters (MERV-8), motor drive suitable for Indoor Application complete as per specifications and drawings AHU Fan Section (Ceiling Suspended Type) 2500 CFM (4250 CMH) @ 20 MM External SP 1.5 KW motor (GF) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 848 | Supply, fabrication and erection of following 16 gauge (1.5 mm thick) gauges of MS ducting complete with welded drip proof seams and having access doors at every change in direction with maximum spacing of 6 meters in horizontal direction and maximun of 3 floors of vertical risers & elbows spliters, supports/suspenders bends, tees, vanes, double canvas connection of the equipment etc all complete as required. Duct shall be insulated 25 MM Thich High Density Rockwool Insulation 48 KG/m3 . The insulation material and its installation shall be in accordance with the specifications as provided. The entire insulation shall be covered with muslin cloth over which 2 coats of Star Bond / approved fire paint is applied to make the insulation hard and fire retardant as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 849 | Supplying, installing, testing and commissioning of double skin construction Duct Mounted Circular Inline Fan upto 800 CFM and cabinet type inline fan (double skin fan section duly insulated as per AHU specs) more than 800 CFM complete with internally mounted motor, fan belt drive, flexible connection, vibrations isolators and complete with following: TEFC Motors suitable for 415 ± 10% volts, 50 Hz, AC supply and IE 3 efficiency. The maximum rating is specified below and contractor can select a lower rating motor incase the desired performance is being met. Forward curved fan inside double skin housing with efficiency not less than 75% Minimum 10-15 mm (WC) external static pressure shall be considered. However, actual total static pressure shall be calculated and confirmed by the vendor at the time of bidding. . 100 CFM at 10 MM ESP (Janitor Room Fresh Air & Exhaust) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 850 | 300 CFM 10 MM ESP (Hand Wash Exhaust GF , Store 01 Fresh Air & Exhaust) |
| 851 | 450 CFM 10 MM ESP (Dry Store Fresh Air & Exhaust Mezzanine Floor 01) |
| 852 | 750 CFM 15 MM ESP (Toiles M & F & Dishwash Exhaust GF / + Dry Store Fresh Air & Exhaust Mezzanine Floor 01) |
| 853 | 1200 CFM at 15 MM ESP (Staff Male & Female Toilet Exhaust) |
| 854 | 1250 CFM at 15 MM ESP (Female Toilet Exhaust) |
| 855 | 2500 CFM at 15 MM ESP (Male Toilet GF Exhaust) |
| 856 | Supplying, installing, testing and commissioning of direct drive industrial propeller fans. Each fan shall be complete with permanent split capacitor or shaded pole motor, mounting plate, accessories like wire guard, bird screen and fixed louvers for weather protection as required. Speed regulator and all other accessories required to complete the installation shall be included. The fan shall be of following rating: 300 dia, Noise level 38 DB at 3m,fan suitable for 220±6% volts 50 cycles, 1 phase AC supply. (LT Panel Room Ventilation) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 857 | Supplying & fixing of 8 Kg/m3 density UPVC pipe (heavy duty) with 9 mm thick closed cell nitrile insulation (tube insulation) with protective coating as per the approved shop drawings and specifications as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 858 | uPVC pipes of 25 mm dia |
| 859 | uPVC pipes of 32 mm dia |
| 860 | uPVC pipes of 40 mm dia |
| 861 | Providing and fixing of powder coated extruded aluminium exhaust air louvers/ fresh air louvers with bird screen and mounting arrangement as per specification and drawings. Free Area shall be more than 60% of gross area Fresh Air / Exhaust Air Louvers with Bird Screen Mesh as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 862 | Annual Maintenance service for following panels(As specified above)(a) DG synchronizuing panel & PLC system (b)HVAC Panel-1and 2 Main Block © Main Block Panel -1&2 (d) Games zone main panel & games zone HVAC Panel(e)Mezz Floor-1 Panel-1&2 (f)Retail Block Panel(g)External feeder pillar -1 &2(Refer external Lighting sub head)(h)1st Floor main panel(i) 1st Floor HVAC panel(j)emergency Panel(k) Capacitor Panel(l) external lighting pillar((Refer external Lighting sub head)(m) HVAC starter panel (type 1 to 9)-22Nos.Total Quantity 39Nos.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year (For 2nd Year) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 863 | Annual Maintenance service for following panels(As specified above)(a) DG synchronizuing panel & PLC system (b)HVAC Panel-1and 2 Main Block © Main Block Panel -1&2 (d) Games zone main panel & games zone HVAC Panel(e)Mezz Floor-1 Panel-1&2 (f)Retail Block Panel(g)External feeder pillar -1 &2(Refer external Lighting sub head)(h)1st Floor main panel(i) 1st Floor HVAC panel(j)emergency Panel(k) Capacitor Panel(l) external lighting pillar((Refer external Lighting sub head)(m) HVAC starter panel (type 1 to 9)-22Nos.Total Quantity 39Nos.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC 3rd Year as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 864 | Annual Maintenance service for following panels(As specified above)(a) DG synchronizuing panel & PLC system (b)HVAC Panel-1and 2 Main Block © Main Block Panel -1&2 (d) Games zone main panel & games zone HVAC Panel(e)Mezz Floor-1 Panel-1&2 (f)Retail Block Panel(g)External feeder pillar -1 &2(Refer external Lighting sub head)(h)1st Floor main panel(i) 1st Floor HVAC panel(j)emergency Panel(k) Capacitor Panel(l) external lighting pillar((Refer external Lighting sub head)(m) HVAC starter panel (type 1 to 9)-22Nos.Total Quantity 39Nos.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC 4th Year as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 865 | Annual Maintenance service for following panels(As specified above)(a) DG synchronizuing panel & PLC system (b)HVAC Panel-1and 2 Main Block © Main Block Panel -1&2 (d) Games zone main panel & games zone HVAC Panel(e)Mezz Floor-1 Panel-1&2 (f)Retail Block Panel(g)External feeder pillar -1 &2(Refer external Lighting sub head)(h)1st Floor main panel(i) 1st Floor HVAC panel(j)emergency Panel(k) Capacitor Panel(l) external lighting pillar((Refer external Lighting sub head)(m) HVAC starter panel (type 1 to 9)-22Nos.Total Quantity 39Nos.The above shall be inclusive of all minor consumable spares like gesket nut bolt thimble extra requird and one visit in month & emergency visit during waranty priod & after to check the whole system & maintain in running condition by authorired add for cpmprehensive maintainace for consecutive year excluding the equipment with free warranted period of one year AMC 5th Year as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 866 | FIRE FIGHTING SYSTEM :- Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc, and fixing the pipe on the wall/ ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 867 | 25 mm dia. |
| 868 | 32 mm dia. |
| 869 | 40 mm dia. |
| 870 | 50 mm dia. |
| 871 | 65 mm dia. |
| 872 | 80 mm dia. |
| 873 | 100 mm dia. |
| 874 | 150 mm dia. |
| 875 | 200 mm dia. (Wall thickness 6.3 mm) |
| 876 | 250 mm dia. (Wall thickness 6.3 mm) |
| 877 | Supplying and fixing Single headed Stainless steel internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type - A) with blank Gunmetal/Stainless Steel cap and chain as required: as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 878 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required: as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 879 | 40 mm dia. |
| 880 | 50 mm dia. |
| 881 | 65 mm dia. |
| 882 | 80 mm dia. |
| 883 | 100 mm dia. |
| 884 | 150 mm dia. |
| 885 | 200 mm dia. |
| 886 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 887 | Providing, installation, testing and commissioning of 150 mm dia. non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 888 | Providing, installation, testing and commissioning of 150 mm dia. stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 889 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required Stainless Steel (Grade 304) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 890 | Supplying and fixing 30 m first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type- 2 as per IS:12585.20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections form riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 891 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. Stainless Steel (Grade 304) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 892 | Supplying and fixing of fire brigade connectiion fo cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 893 | 2 way-100 mm dia M.S. Pipe |
| 894 | 4 way-150 mm dia M.S. Pipe |
| 895 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 896 | Providing, fixing, testing & commissioning of 15 mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories: as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 897 | Pendent Sprinkler |
| 898 | Upright Sprinkler |
| 899 | Horizontal side wall sprinkler |
| 900 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 901 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc. as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 902 | 100 mm dia |
| 903 | 150 mm dia |
| 904 | Providing, fixing, testing & commissioning of 150 mm dia installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. of following sizes as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 905 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 906 | 1000 mm |
| 907 | 1200 mm |
| 908 | 1500 mm |
| 909 | Providing, installation testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 910 | Supply, Installation, Testing & Commissioning double flanged vertical air vessel fabricated from 10mm M.S. plate with dished ends from 10mm M.S. plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality and sufficient number of pressure switches, air release valve, tripod type stand, pressure gauge with ball valve, drain ball valve of 50mm dia with 2.0 meter long GI (Heavy Duty ) piping complete as required and all other required accessories to operate commonly main fire pump, diesel fire pump and Jockey pump at drop of pressure, automatically at required pressure setting; Recommended dia.: 450 mm Height of shell: 2000 mm Working pressure: 8.5 Kg/Sq.cm Test Pressure:15 Kg/Sq.cm as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 911 | Providing and fixing flanged flexible Ruber bellow of rating PN 1.6 or equivalent, to provide stress relief for suction/delivery of pumps, complete with standard flanges, nuts, bolts etc. as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 912 | 200mm dia (min.150 mm length) |
| 913 | 150mm dia (min.150 mm length) |
| 914 | 100mm dia (min.150 mm length) |
| 915 | 80mm dia (min.150 mm length) |
| 916 | 65mm dia (min.150 mm length) |
| 917 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 918 | 80 mm dia |
| 919 | 100 mm dia |
| 920 | Providing, fixing, testing & commissioning of 15 mm dia quartzoid bulb type sprinklers with required accessories: Pendent / Upright Sprinkler 79°C (Quick Response) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 921 | Providing, fixing, testing & commissioning of 100 mm dia ( working pressure 10.00 Kg/cm2) water flow meter with bypass arrangement complete with piping and fittings for flow indication, monitoring & testing of fire pumps as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 922 | Providing, fixing, testing & commissioning of 100 mm dia M.S. class 'C' diesel pump exhaust pipe including all fittings like bends, tee, clamps/structural steel support of suitable dia for the engine. The pipe shall be provided with 12 mm thick Supercera Ceramic Fibre rope as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 923 | Providing and fixing of Standard Fireman's Axe with heavy insulated handle as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 924 | Providing and fixing Weather proof standard fire hose cabinet (750 mm x 600 mm x 300 mm deep) made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with \\" Fire Hose\\" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner (For Terrace Hydrant & External) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 925 | Providing and fixing fire authority approved weather proof M.S. fire hose door (size 900 (L) x 2100 (H)) made out of 16 gauge M.S. sheet Angle frame capable of accommodating fire hose reel, fire hydrant, hose pipe, fittings & accessories. The box shall have a single or double glazed front glass door (with 4 mm thick glass) with lock & key arrangement & shall be painted with Fire red as per IS:5, shade no. 536. Drain arrangement shall be provided by Contractor. (For Internal Hydrant) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 926 | Providing and fixing fire authority approved weather proof M.S. hose cabinet (size 900 (L) x 2100 (H) x 600 mm deep) made out of 16 SWG powder coated M.S. sheet Angle frame capable of accommodating fire hose reel, fire hydrant, hose pipe, fittings & accessories. The box shall have a single or double glazed front glass door (with 4 mm thick glass) with lock & key arrangement & shall be painted with Fire red as per IS:5, shade no. 536. (For Internal Hydrant) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 927 | Providing and fixing 25 mm dia brass/bronze lever operated ball valves of full flow with stainless steel ball (AISI 304 and spindle AISI 401) with settling and gland of superior quality and having minimum working pressure of 15 Kg/cm2 as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 928 | Providing and fixing cast iron air release valve of 25 mm dia including 25 mm dia Ball valve with fittings etc. as per the requirement as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 929 | Providing and fixing Bourdon type Stainless Steel dial type pressure gauge with brass isolation valve and pipe. (For each internal Fire hose cabinet) Dial Diameter : 100 mm Caliberation : 0-15 Kg/cm2 as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 930 | Providing and making drainage provision for the wet riser with 40 mm dia MS (heavy duty) pipe, ball valve, fittings etc. as required maximum length of pipe 6 mtr as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 931 | Providing and fixing 25 mm dia inspection & testing assembly with gun metal Gate valve, gun metal sight glass, drain valve (Ball valve 50mm dia) & connection to drain as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 932 | Providing and fixing heavy duty copper armored cables 1.1 KVA grade including necessary support clamps at ceiling level and connection thimbles and double compression glands,complete in all respects as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 933 | Control cable 6 core 2.5 Sq.mm |
| 934 | Control cable 4 core 1.5 Sq.mm |
| 935 | Control cable 2 core 1.5 Sq.mm |
| 936 | Providing and fixing heavy duty Aluminum armored cables 1.1KVA grade including necessary support clamps at ceiling level, connection thimbles and double compression glands, complete in all respects as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 937 | Power cable 3 core 6 Sq.mm |
| 938 | Power cable 3 core 10 Sq.mm |
| 939 | Power cable 3 core 16 Sq.mm |
| 940 | Power cable 3 core 50 Sq.mm |
| 941 | Power cable 3 core 70 Sq.mm |
| 942 | Providing and Fixing of Dry Chemical Powder based Portable Fire Extinguisher, filled with DCP (ABC) MAP-90% (Mono-Ammonium Phosphate) Powder, Stored Pressure Type, UGTS Pressure Gauge, CE Marked Valve with NRV, fitted with EPDM Rubber Hose, fixed to wall with brackets including all necessary accessorises, Applicable on Class A,B & C and Electrically-Started-Fire, IS 15683:2018 Marked as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 943 | a) Capacity 4 Kg. |
| 944 | b) Capacity 6 Kg. |
| 945 | c) Capacity 9 Kg. |
| 946 | Providing and Fixing of Co2 (Carbon Dioxide) based Portable Fire Extinguisher, Valve shall be to IS 3224 Marked, PESO Approved Cylinder and shall be IS 7285 Marked on Body, fitted with High Pressure Wire Braided Hose & Flat Horn with Diffuser, fixed to wall with brackets including all necessary accessorises, IS 15683:2018 Marked as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 947 | a) Capacity 2 Kg. |
| 948 | b) Capacity 4.5 Kg. |
| 949 | c) Capacity 9 Kg. (IS 16018:2012 Latest Trolley Mounted) |
| 950 | d) Capacity 22.5 Kg. (IS 16018:2012 Latest Trolley Mounted) |
| 951 | Providing and Fixing of Clean Agent FK 5-1-12 (Fluoroketone-UL Listed) Portable Fire Extinguisher, Gas G.W.P. shall be 1 or les, with ZERO O.D.P. (Ozone Depletion Potential), Approved by EPA (Environmental Protection Agency, U.S.A.) & Listing under USA Signification New Alternative Policy (SNAP). CE Marked Valve with NRV, fitted with EPDM Rubber Hose, fixed to wall with brackets, IS 15683:2018 Marked as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 952 | a) Capacity 2 Kg. |
| 953 | b) Capacity 4 Kg. |
| 954 | c) Capacity 6 Kg. |
| 955 | Providing and Fixing of Clean Agent FK 5-1-12 (Fluoroketone-UL Listed) Automatic Modular Fire Extinguisher with Auto-Discharge Mechanism, Gas G.W.P. shall be 1 or les, with ZERO O.D.P. (Ozone Depletion Potential), Approved by EPA (Environmental Protection Agency, U.S.A.) & Listing under USA Signification New Alternative Policy (SNAP). CE Marked Valve with NRV, fitted with EPDM Rubber Hose, fixed to wall with brackets, IS 15683:2018 Marked. Sprinkler with Glass Bulb 68 Degree Celsius as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 956 | a) Capacity 5 Kg. |
| 957 | b) Capacity 10 Kg. |
| 958 | Providing and Fixing of Water Type 9 Ltr Portable Fire Extinguisher Cap. 9 Ltr Filled with DM Water, Stored Pressure Type, UGTS Pressure Gauge, EPDM Rubber Hose, External Coating Pure Polyester (UV Resistant), Controllable discharge mechanism, Jet Range 7 Meters, Average Discharge is 95%, Applicable on Class A Fires, As per IS 15683:2018 Marked as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 959 | Providing and Fixing of Mechanical Foam 9 Ltr Portable Fire Extinguisher Cap. 9 Ltr Filled with AFFF Foam confirms to IS 4989 (Part-II). Stored Pressure Type, UGTS Pressure Gauge, EPDM Rubber Hose, External Pure Polyester (UV Resistant), Controllable Discharge Mechanism, Jet Range 7 Meters, Average Discharge is 95%, Applicable on Class A & B Fires, As per IS 15683:2018 Marked as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 960 | Providing and Fixing of Mechanical Foam Trolley type Fire Extinguisher, filled with AFFF Foam, Applicable Fire Class A & B, Controllable Discharge Mechanism, Fitted with Crack Proof Hose (Not Less than 3 Mtr) & Air Aspirated Nozzle, CO2 Gas Cartridge (IS-4947) of 300 Grams, External Pure polyester (UV Resistant) and Internal Epoxy Polyester Powder Coated, Brass Forged Cap, IS 16018:2012 Marked as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 961 | a) Capacity 45 Ltr. |
| 962 | b) Capacity 60 Ltr. |
| 963 | Providing and Fixing of Wet Chemical (K Type Kitchen) Portable Fire Extinguishers, Capacity 6 Litre, body made of SS 304-L, Squeeze Grip NRV Valve, UGTS Pressure Gauge EPDM Hose with Nozzle, Pressureized with Dry Nitroge and mainted as per IS 2190:2010 Revision Fourth as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 964 | a) Capacity 6 Ltr. |
| 965 | b) Capacity 9 Ltr. |
| 966 | Supply and Fixing of Fire Buckets Stand complete with 4 Nos 9 Ltr Fire Bucket, Buckets shall be painted red from outside and with handle at the bottom for easy operation and handling as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 967 | Providing & Fixing of Floor Mounted SS Stand (MOC:SS-304, Outside Mirror Polished) to accommodate Extinguisher where could not installed on wall / column as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 968 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc. as required. 80 mm dia as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 969 | EFFLUENT TREATMENT PLANT (ETP) 15 KLD:- Design, Supplying, installing, testing & commissioning of Effluent Treatment Plant of 15 KLD for the following duty: Nature of effluent - Effluent from Food Court Kitchen shall be discharged into the ETP. Design to take consideration of same. Location - Inside basement STP Room. The ETP shall be designed based on the following parameters :- Daily average flow 15 KLD Anticipated effluent parameters before treatment: PH 6.5 - 8.5 BOD 200 - 300 mg/l S. Solids 150 - 350 Mg/l COD 800 - 1200 mg/L Oil & Grease 50-100 mg/L Effluent discharge standard after treatment :- PH 6.0 - 8.5 BOD5 Less than 30 mg/l S. Solids Less than 50 mg/l COD Less than 100 mg/l Oil & Grease Less than 5 mg/l Pre-Fab Structure Constructing the following tanks and chambers in 5 mm Thick MS FRP fabrication. The above cost shall include the cost of all the required MS structure for skid platform, walking platform, handrails, staircase, puddle flanges, foot rests, mahole cover etc with painting of desired shade of enamel paint over a coat of primer. Coagulation & Flocculation Tank Capacity : 250-300 Ltr. MOC : MSFRP Settling Tank Capacity : 1000 LTr. MOC : MSFRP Tanks as describe above as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 970 | Supplying, installing, testing & commissioning modular type Oil & Grease Trap, to trap & extract manually kitchen waste, Oil & Grease before effluent flow to ETP collection tank Size : Suitable for 15 KLD ETP MOC : MSFRP as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 971 | Supply, installation, testing & commissioning of Non clogging submersible type Effluent lifting pumps having CI casing & CI impeller complete with all accessories, motor of required capacity. pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. The pump shall be suitable for 220/415±10% volts 3/1 phase AC supply. Pumps shall have following duty: Capacity :1.5 M3/H Head : 8 mtr Solid handling: 15-20mm Make: Kirloskar / Lubi / Crompton as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 972 | Supplying, installing, testing & commissioning of Horizontal centrifugal non clog water pumps with CI casing CI/SS Impeller along with motor, pressure gauge Isolation valve, NRV on delivery line. Mechanical seal, suitable M.S base frame. The pump shall be suitable for 220/415±10% volts 3/1 phase AC supply. Including foundation bolts.Make: Kirloskar / Lubi / CRI / Crompton Filter Feed Pumps Capacity : 2 M3/H Head : 20-25mtr as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 973 | Supplying, installing, testing and commissioning of Tertiary treatment systems comprising of a FRP Media Filter with minimum 1mtr natural media bed dept uPVC Frontal Piping & Multiport Valve. Filters shall be suitable for flow rate of 2m3 at 2.5 Kg/Sqcm working pressure as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 974 | Supplying, installing, testing and commissioning of Tertiary treatment systems comprising of a FRP Media Filter with minimum 1mtr Activated Carbon bed dept uPVC Frontal Piping & Multiport Valve. Filters shall be suitable for flow rate of 2m3 at 2.5 Kg/Sqcm working pressure as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 975 | Supply,Installation,testing and commissioning of Air Blower for Coagulation & Flocculation Tank with following duties. Ring Blower Direct Drive Technology Rating: 0.5 hp as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 976 | Supply, installation, testing & commissioning of Lime dosing system comprising of 50 ltrs HDPE/FRP tank with 0-5 lph electronic metering type diaphragm pump and air line in Dosing tank.Make: UPC / E-Dose/Asia LMI as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 977 | Supply, installation, testing & commissioning of Alum dosing system comprising of 50 ltrs HDPE/FRP tank with 0-5 lph electronic metering type diaphragm pump and air line in Dosing tank.Make: UPC / E-Dose/Asia LMI as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 978 | Supply, installation, testing & commissioning of Poly dosing system comprising of 50 ltrs HDPE/FRP tank with 0-5 lph electronic metering type diaphragm pump and air line in Dosing tank.Make: UPC / E-Dose/Asia LMI as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 979 | Supply, installation, testing & commissioning of Chlorine Dozing system comprising of 50 ltrs HDPE/FRP tank with 0-5 lph electronic metering type diaphragm pump and air line in Dosing tank.Make: UPC / E-Dose/Asia LMI as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 980 | Supply, installation, testing and commissioning of Tubedeck media to be installed in tube setller for better settlement of sludge.Make: Biotech / Bharat/Cooldeck as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 981 | Providing and fixing all piping (as described below) and isolation control valves for making the system complete. u-PVC : Submerged air piping u-PVC : Air piping & pumped effluent riser (non-submerged) u-PVC : Interconnecting pipe line after delivery header of pump u-PVC : Pumped effluent (submerged) & tank overflow pipe line Make: Ajay / Astral / Supreme as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 982 | Providing & fixing level controller for water pumps to start/stop the pumps at set level, Including wiring, cabling from pump to panel & all other accessories as required to operate the system automatically as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 983 | Supply, installation, testing & commissioning of electro-magnetic type flow meter at inlet of reacter tanks 25mm size.Make: UPC / Peltec / Electronet as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 984 | Supply, installation, testing & commissioning of Digital pH meter, pH scale range 0-14 with sensor wire and connector.Make: Aster/Eqv as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 985 | Providing ,fixing, testing and commissioning of electrical Control Panel for all motors & electrical equipment's as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 986 | Providing ,fixing, testing and commissioning of all cable wiring with cable tray, MS support etc. Make Polycab / Havells as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 987 | Providing ,fixing, testing and commissioning of Filter Feed tank of LDPE sintex type. Capacity of tank 1000 Ltr as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 988 | Supply, installation, testing & commissioning of 1 Nos. Stainless Steel SS 304 Perforated Corrugated Bar Screen of size 300mm x 300mm with suitable lifting arrangement as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 989 | Supply, installation, testing and commissioning of Non clogging type submersible pumps capable of handling solids up to 20-30mm having CI. casing & CI impeller complete with all accessories, valves, headers etc motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty: Flow rate (each) = 2.5 m3/hr Head= 08-10 Mtr Qty = 02 Nos (1 Working / 1 Standby) Make- Wilo / KSB / Lubi / Kirloskar as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 990 | Supply, installation, testing and commissioning of Non clogging type centrifugal pumps capable of handling solids up to 8 mm having C.I. casing & CI impeller complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty: (1w+1s) Flow rate (each) = 4000 lph Head= 10 Mtr Qty= 02 Nos (1 Working / 1 Standby) Make- Wilo / KSB / Lubi / Kirloskar as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 991 | Supply, installation, testing and commissioning of Sludge de-watering system Centrifuge Machine of suitable size, with feed pump of suitable flow. Complete in all respect. Make: Fabtech, Universal as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 992 | Supply, installation, testing and commissioning of 2 Nos. air blower (one working & one standby) capable of delivering 60 m3 of free air each at 4000 MMWG driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP suitable for 415 ± 10% volts, 3 phase, 50 cycles A.C. supply, Air for ETP chemical mixing tank will supply by STP air blower.(Make: Omikon / Akash / Beta) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 993 | Supply, installation, testing and commissioning of CPVC & MS Pipeline Air Grid (heavy Class) complete with fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, 1 Set. (Make Jindal, Tata, Ajay, Supreme) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 994 | Supply, installation, testing and commissioning of Non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced/ repaired easily from platform at the top. Air dispersion system shall be provided for sewage sump, Aerobic digester cum Thickener & Aeration Tank.Flexible pipes complete with stainless steel fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good for submerged air piping.Make : Biotech / PP Aqua / Febtech as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 995 | Supplying, installing, testing & commissioning of Horizontal multistage centrifugal pumps with CI casing & SS impeller, SS shaft & sleeve along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, Mechanical seal, base frame, Suction and discharge header level controler etc.complete in all respect. Flow rate (each) = 10 m3/hr Head= 40 - 45 Mtr Quantity= 02 Nos (1 Working / 1 Standby) Make- Wilo / Kirloskar / Lubi as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 996 | Supplying, installing, testing & commissioning of Centrifugal pumps having C.I. casing & CI impeller complete with all accessories, valves, headers motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) Pumps shall have following duty: Flow rate (each) = 4 m3/hr Head = 25-30 Mtr Quantity= 02 Nos (1 Working / 1 Standby) Make- Wilo / Kirloskar / Lubi as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 997 | Supplying, installing, testing & commissioning of Non Clog type Vertical/Horizontal multistage flushing water transfer pumps having C.I./SS casing & CI/SS impeller complete with all accessories, valves, headers motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) Pumps shall have following duty: Make- Wilo / Kirloskar / Lubi as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 998 | Retail Block Flow rate (each) = 4 m3/hr Head = 40 Mtr Quantity= 02 Nos (1 Working / 1 Standby) |
| 999 | Main Building Block Flow rate (each) = 5 m3/hr Head= 40 Mtr Quantity= 02 Nos (1 Working / 1 Standby) Make- Wilo / Kirloskar / Lubi |
| 1000 | Supplying, installing, testing and commissioning of Tertiary treatment systems comprising of a FRP / MSEP Media Filter with minimum 1mtr natural media bed dept Frontal Piping, & Butterfly / Multiport Valve. Filters shall be suitable for flow rate of 4m3 at 2.5 Kg/Sqcm working pressure Flow rate : 4m3/hr Output Filtration Velocity :- 18m3/hr/m2 Working pressure : 2.5kg/m2 Hydro Test pressure : 4.5kg/m2 Natural Media : pebbles, gravels, core silex , sand as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1001 | Supplying, installing, testing and commissioning of Tertiary treatment systems comprising of a MSEP Activated Carbon filter with minimum 1mtr media and activated carbon bed dept with Frontal Piping, & Butterfly Valve. Filters shall be suitable for flow rate of 5m3 at 3.5 Kg/Sqcm working pressure Flow rate : 4m3/hr Output Filtration Velocity :- 18m3/hr/m2 Working pressure : 2.5kg/m2 Hydro Test pressure : 4.5kg/m2 as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1002 | Plumbing & Interconnecting Pipeline of all the equipments with UPVC fittings Sch40/80 & make the plant running with tees, crosses, plugs, sockets, elbows, including flow direction with desired shade of colour coding - 1 Set. (Make Ajay / Supreme / Astral) as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1003 | MBBR Media Make : Biotech / PP Aqua / Febtech as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1004 | Tube Settler Media PVC Tube Media of 650 mm heightMake : Biotech / PP Aqua / Febtech as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1005 | Supply, installation, testing and commissioning of ultraviolet dis-infection unit. The unit shall have over 99% bacterial reduction from inlet to outlet. The Disinfection chamber shall be constructed of SS316L on all wetted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight & vibration resistant. The lamp life shall be rated for 6000 hours. UV system shall be designed for treatment of domestic water of 5 M3/Hr Make: Alfa/Trozan/Wedico/Infilco as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1006 | Supply, installation, testing & commissioning of chlorine dosing system consisting of one FRP/ HDPE tank of 50 liters capacity with a positive displacement diaphragm Dosing pump with a variable flow rate of 0-5 LPH. The motor shall be suitable for operation at 240 V /one phase/ 50 Hertz supply. The pump shall be supplied complete with necessary poly propylene piping, valves, strainers & injection fittings for system to dose solution to the feed line. Make: Dropx/Edose as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1007 | Supply, installation, testing & commissioning of Non clogging type submersible pumps capable of handling solids up to 10-15mm having CI. casing & CI impeller complete with all accessories, valves, headers etc motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty: as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1008 | STP Room Sump Pump Flow rate (each) = 8 m3/hr Head = 8 Mtr Qty = 02 Nos (1 Working / 1 Standby) Make- Wilo / Kirloskar / Lubi |
| 1009 | STP Bypass Pump Flow rate (each) = 10 m3/hr Head = 10 Mtr Qty = 01 Nos Make- Wilo / Kirloskar / Lubi |
| 1010 | Sewage flow Measurement - Magnetic Flow Meter outlet of Activated Carbon filter -1 No. Level Controler Switch - Sump Pit tank, Equalisation tank, filter feed tank treated water tank, UF tank. Anoxic mixture of suitable capacity for anoxic tank Y Strainer 05 Nos for Filter feed, Sludge Transfer Pump, Irrigation pump and flushing water transfer pumps. Pressure Switch for Flushing water transfer pipe line- 2 Nos.. Instruments Items as described above as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 1011 | Ultra Filtration UF Module (Hollow Fibre -outside in type porocity 0.1 to 0.01 micron) including micron cartridge filter in PP housing, Pneumatic Valve, PLC Electrical Panel and all other accessories making the system complete Providing, installation, testing & commissioning of Ultra Filtration System (UF) of capacity 2m3/hr. The system should be complete with Feed Pump 2m3/hr Back Wash Pump ,2m³/h 20-25m, PP Cartidge Filter, UF Membrane with Housing, Flushing/Cleaning System, complete instrumentation for automation and monitoring Rotameter, pressure guage, interconnecting pipe, vales/solenoid valve, PLC base electrical panel with cabling all complete with all accessories. Flow rate : 2m3/hr Output Filtration Flux :- 40-60 lt/m2/hr Membrane MOC - PVDF Membrane Type :- Out to in process Make UF Membrane - GE / Grafil / Dow or equalent Make- Wilo / Kirloskar / Lubi as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
| 1012 | Ultra Filtration UF Module (Hollow Fibre -outside in type porocity 0.1 to 0.01 micron) including micron cartridge filter in PP housing, Pneumatic Valve, PLC Electrical Panel and all other accessories making the system complete Providing, installation, testing & commissioning of Ultra Filtration System (UF) of capacity 2m3/hr. The system should be complete with Feed Pump 2m3/hr Back Wash Pump ,2m³/h 20-25m, PP Cartidge Filter, UF Membrane with Housing, Flushing/Cleaning System, complete instrumentation for automation and monitoring Rotameter, pressure guage, interconnecting pipe, vales/solenoid valve, PLC base electrical panel with cabling all complete with all accessories. Flow rate : 2m3/hr Output Filtration Flux :- 40-60 lt/m2/hr Membrane MOC - PVDF Membrane Type :- Out to in process Make UF Membrane - GE / Grafil / Dow or equalent Make- Wilo / Kirloskar / Lubi as approved by Engineer-In-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender