Tender For Repairing Of Bts Shelter With Gi Section And Sheet At Collinpur,Manpur, Miletilak & Chinmay Mission Bts A&N Islands.
Tender Value
4.87 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
4 days left
EMD
9750
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Bts Shelter With Gi Section And Sheet At Collinpur,Manpur, Miletilak & Chinmay Mission Bts A&N Islands.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: a)G.S. Sheet |
| 2 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 3 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. a)40 mm thick with 20 mm nominal size stone aggregate |
| 4 | 15 mm cement plaster on rough side of single or half brick wall of mix : a)1:4 (1 cement: 4 coarse sand) |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 7 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: a)Two or more coats on new work. |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :a) Two or more coats on new work. |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 10 | Extra for using GI sections, ie angles, plates, flats etc instead of MS sections ie, angles , plates and flats for executing work vide item No 9 |
| 11 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (With available departmental materials) |
| 12 | Mechanical transportation of GI pipes from BSNL store and GI sheets to work sie including Loading and unloading complete. |
| 13 | Providing and fixing in position by welding GI expanded metal fabric of aparature size 25x25mm weighing not less than 7.50Kg per Sqm as per direction of the Engineer-in-charge |
| 14 | Supplying and fixing 450mm long MS anchor bolt(up to 16mm dia) with 125mm thread in one side for fixing vertical pipes with GI double nuts and washers and 75x75x5mm plate welded to other side for anchorage of bolt including fixing to foundation with C.C 1:2:4 as per direction of the Engineer-in-charge. |
| 15 | Credit for dismantled unserviciable materials to agency.a)Rusted old GI sheet, MS angle and the like |
| 16 | Spot welding at site including hire, running, loading & unloading and transportation of electric welding plant as per direction of the Engineer-in-charge. |
| 17 | Painting the 6 metre high Roof Top tower, including ladder, cable tray, working platforms, gantries etc. with Luxol or equivalent high gloss synthetic enamel paint in two or more coats of required colour, (as per aviation standards for tower) and even shade including applying Zinc Chromate on the new work wherever required as directed by Engineer-incharge. This item includes necessary hire charges of tools & plants, payment of insurance premium of working labours, safety implements, etc., all complete as per the direction of engineer-in-Charge. Credit for available dimantled unserviciable materials to agency (a) Old rusted MS/GI sheet, angle, flat, Tee and the like Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender