Tender For Construction Of Munsiff Court Complex At Drass ( By Way Of Compound Wall On Parking Side) (Under Sdp)
Tender Value
28.28 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
4 days left
EMD
56500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Munsiff Court Complex At Drass ( By Way Of Compound Wall On Parking Side) (Under Sdp)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 2 | ORDINARY ROCK 20% |
| 3 | ALL KINDS OF SOIL 80% |
| 4 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 5 | STONE SOLLING Dumping of stone including cost of stone (in horizontal on level) |
| 6 | Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse Sand) 2nd Sort |
| 7 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (crushed) |
| 8 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) (crushed) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, excluding the cost of centering, shuttering and finishing :water trough type wash basin in Bath/Toilets 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column |
| 12 | Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortor 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete: 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size |
| 13 | 12 mm thick cement plaster of mix in cement mortar 1:6 (1 cement:6 fine sand) |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. |
| 16 | Providing and fixing Y Shape Angle Iron posts in in Pillars 50 x 50 x 6mm angles (4.5Kg/m) |
| 17 | Providing and fixing barbed wire fencing three on each side of Y shaped Angle iron |
| 18 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensilestrength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender