Tender For Special Repair To Bldg No T-48 (Ors Md Accn) And P-12 (B/S Yard)At Jalapahar Under Age (I) Darjeeling.
Tender Value
22.53 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
19 days left
EMD
45100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-48 (Ors Md Accn) And P-12 (B/S Yard)At Jalapahar Under Age (I) Darjeeling.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | M & L rendering 15 mm thick (10mm + 5mm) in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement mixed with intergral water proofing compound 3% of cement or per manufacture instruction Complete all as specified and as directed. (WPC measured and shall be paid separately). |
| 3 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work, or concrete work rendering finished even and smooth (without using extra cement), complete all as specified and directed. |
| 4 | Supply only integral water proofing compond, all as specified and directed. |
| 5 | M&L preparation of new plastered surface of wall & applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and as directed. |
| 6 | M&L for complete removal of existing treatment on plastered or unplastered surface of wall including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spot & applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and as directed. |
| 7 | M&L for 1mm thick wall care putty on wall, complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment on plastered or unplastered surface of wall including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spot and applying two coats of weather coat (exterior grade) over one coat of priming coat of alkali-resistant priming paint, complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 10 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed. |
| 11 | M&L for 75mm thick plain cement concrete (1:4:8), type D2 (using 40mm graded stone aggregate) as in sub-base, sub-floors, floors, pavings etc., all as specified and as directed. |
| 12 | M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 13 | M&L for hardcore using broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 14 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick, premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed. |
| 15 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 etc complete all as specified and directed by Engr-in-charge. |
| 16 | M&L for glazed ceramic colouered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as risers of steps, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering in cement mortar (1:4) finished even and rough, complete all as specified and directed. |
| 17 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 18 | M&L for reinforced cement concrete (nominal mix) (1:2:4), type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 19 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., rough finished surfaces of concrete on flat surface, complete all as specified and directed. |
| 20 | M&L for providing precast cement concrete (1:2:4), type B1 (using 20mm graded crushed stone aggregate) in window or door cills,lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar (1:6) complete with joints to match, all as specified and directed. |
| 21 | M & L for Mild steel bars 10 mm dia and over, cut to length,bent to shape required,including cranking ,bending spirally for hooping for columns,hooking ends and binding with and and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed. |
| 22 | M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed. |
| 23 | M&L Marble Tiles 30cm By 30cm By 20mm Thick Machine Cut,Bedded Jointed And Pointed With Grey Cement Slurry Including Cutting and mirror Polishing white marble including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed. |
| 24 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 25 | S&F aluminium anodised snap grid frame work of size 605mm X 605mm framework for ceiling with aluminium tee section of size 23.5mm X 26.4mm X 1.4mm thick and aluminium angle section of size 36.5mm X 25mm X 1.4mm thick, for false ceiling incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long incl 4mm thick non asbestos E-board, HSPC fixed to frame complete all as specified and as directed. |
| 26 | M&L for machine cut Kota stone slab flooring, 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in cement mortar (1:6) finished even and rough, complete all as specified and directed. |
| 27 | M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 15 mm thick rendering in cement mortar (1:3) finished even and rough, complete all as specified and directed. |
| 28 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 29 | M&L for brickwork with fly ash bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar(1:6), complete all as specified and directed. |
| 30 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 31 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 32 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 34 | S&F of rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality- A, all as specified and directed. |
| 35 | S&F of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 36 | Taking up or down old 15 mm bore steel water tubing and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed. |
| 37 | S&F of 15 mm bore steel water tubes, medium grade, galvanised with and including all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and directed. |
| 38 | Taking up or down old 20 mm bore steel water tubing and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed. |
| 39 | S&F of 20 mm bore steel water tubes, medium grade, galvanised with and including all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and directed. |
| 40 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls, complete all as specified and directed. |
| 41 | S&F in repair Wall Mixer with non-telephonic chromium plated cast copper with approved make CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia. complete.complete all as specified and directed. |
| 42 | &F for 15mm bore dia bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 43 | S&F of 15mm bore dia pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 44 | S&F in repair 15mm bore dia stop valves,/angle valvechromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 45 | S&F in repair 15mm bore PVC connection 600 mm long with two brass chromium plated brass nuts and PVC washers, complete all as specified and directed. |
| 46 | S & F Vitrous China wash down water closet pan pedestal pattern white, inclusive of and fixing 'P' or 'S' trap, connecting to union of flushing cistern and drain pipe complete all as specified and directed. |
| 47 | S&F in repair plastic water closet seat cover, of approved colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 48 | S & F PVC valve less , syphonic action type flushing cistern 10 ltr capacity low level, whit, with inlet, ball valve float, flush pipe and handle including brackets, low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. |
| 49 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 50 | S&F of Vitreous china wash basin white, flat back, size 450 X 300 mm excluding tap waste but incl bracket and incl cutting for and pinioning in ends of brackets but exclusive of supply waste pipe, complete all as specified and directed. |
| 51 | S&F of 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, all as specified and directed. |
| 52 | S&F PVC waste pipe 32mm dia suitable length for WHB/Sink all as specified and directed. |
| 53 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 54 | S & F sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe, waste coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 55 | S&F of 20 mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), all as specified and directed. |
| 56 | Supplied and fixed of 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 57 | S&F of 20 mm dia Ball valves ,high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 58 | S&F of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, including taking down of old material as in repair complete all as specified and directed. |
| 59 | S&F of PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 60 | S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 61 | S&F of PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, laid in trenches or in floors/weep hole, complete all as specified and directed. |
| 62 | S&F of 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door including jointing with solvent cement, complete all as specified and directed. |
| 63 | S&F of 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 64 | S&F of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 65 | S&F of 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof all as specified and directed. |
| 66 | M&L for 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 67 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 68 | M&L for 75 mm thick plain cement concrete(1:3:6), type C2 (40 mm graded stone aggregate) as in flooring, plinth protection, hard standing, path etc including finish the surface even and smooth with using extra cement, complete all as specified and directed. |
| 69 | Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed. |
| 70 | Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame), complete all as specified and directed. |
| 71 | S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 72 | S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed. |
| 73 | S&F pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges, lock, strike plate, etc., complete all as specified. |
| 74 | S&F 35mm thick 2nd class hardwood rail and style Factory made plain frames, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-1), kiln seasoned and chemically treated : supplied and fitted to chowkhats, complete all as specified and directed. |
| 75 | S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple (bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 76 | S&F of anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed. |
| 77 | S & F power coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Complete all as specified and as directed. |
| 78 | S&F of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 79 | S&F 4.0 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge. |
| 80 | S&F of 150 mm size aluminium handles, cast type, anodised, all as specified and directed. |
| 81 | S&F of 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed. |
| 82 | M&L for preparation of new wooden or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 83 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 84 | S&F of 180mm bore PVC (SWR) half round gutter drain pipe, complete all as specified and directed. |
| 85 | S&F of 180mm bore PVC (SWR) joint socket, complete all as specified and directed. |
| 86 | S&F of 180mm bore PVC (SWR) joint tee with end cap, complete all as specified and directed. |
| 87 | S&F of 180mm bore PVC (SWR) pipe clamp, complete all as specified and directed. |
| 88 | M&L for plain cement concrete (1:2:4), type B0 (using 12.5mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 89 | S&F of soap dish, vitreous china white, approximate size 160mm x 160mm x 90mm, complete all as specified and directed. |
| 90 | M&L for plain cement concrete(1:3:6), type C-1 (20 mm graded stone aggregate) in surface channels and drains, complete all as specified and directed. |
| 91 | M&L for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement including forms, moulds mitered / stopped ends etc all as specified and as directed. |
| 92 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed. |
| 93 | Taking down DB's including MCB's etc., complete all as specified and directed. |
| 94 | Taking down sub main wiring of any size including making good the disturbed surfaces, complete all as specified and directed. |
| 95 | M&L for Point wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor FRLS/FRLSH cable 1.5 Sq mm size 1100V grade in and including PVC conduit medium grade ISI marked duly concealed of 25mm dia (Sharing of Conduit shall be as per IS) including one No. 1.5 Sq mm single core PVC insulated copper cable for continuous earth wire (green coloured) connected to earth dolly complete for one light /Bell point controlled by one 5 Amp switch one way including factory made GI concealed box sutaible for modular switch/sockets etc ISI mark and making good disturbed surface of walls & floors etc., complete all as specified and directed. [Note - Wiring shall be circuit type and Nos of conductor in conduit shall be taken as per orders]. |
| 96 | One light/bell point/Exhaust fan point controlled by one, 1- way switches. |
| 97 | One socket outlet, 3 pin 5/6 Amps on same Board |
| 98 | One socket outlet, 3 pin 5/6 Amps, independent Board with conduit size 20/25mm dia med grade in same/other/independent circuit as per site requirements. |
| 99 | Ditto- All as per Item No. 95.03 above but for socket outlet 15/16 Amps on independent board with 2.5 sqmm size cable for Phase, Neutral and Earth and size of concealed conduit 25mm med grade ISI marked (Sharing of Conduit shall be as per IS) complete all as specified and as directed. |
| 100 | M&L for modular switch one way 6/10 Amps, 1 module, 240 Volts, all as specified and directed. |
| 101 | M&L for modular bell push 6 Amps 1 module, 240 Volts, all as specified and directed. |
| 102 | M&L for modular socket, 6 Amps - 2/3 pin combined 2 module, 240 Volts, all as specified and directed. |
| 103 | M&L for modular socket, 6Amps / 16Amps - 2/3 pin combined 2 module, 240 Volts, all as specified and directed. |
| 104 | M&L for modular switch one way 16 Amps, 1 module, 240 Volts, all as specified and directed. |
| 105 | M&L for modular blank plate, 1 module, 240 Volts, all as specified and directed. |
| 106 | M&L for modular white cover plate with frame, 2 module, 240 Volts, all as specified and directed. |
| 107 | M&L for modular white cover plate with frame, 3 module, 240 Volts, all as specified and directed. |
| 108 | M&L for modular white cover plate with frame, 4 module, 240 Volts, all as specified and directed. |
| 109 | M&L for modular white cover plate with frame, 6 module, 240 Volts, all as specified and directed. |
| 110 | M&L for modular white cover plate with frame, 8 module, 240 Volts, all as specified and directed. |
| 111 | S & F Bell Ding-Dong AC 230 V Single Pole complete as dircted. |
| 112 | M & L for Ceiling rose, PVC/polycarbonate, insulated body, 3 terminals and 240 Volts ISI marked complete all as specified as directed. |
| 113 | Supply and fix Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. |
| 114 | S & F LED Plus bulb 9 Watt B22 CDL 1 S lamp V7 for holder complete all as specified and directed. |
| 115 | S & F in repair wall mounted LED Tube light fitting 20 Watts surface mounting general purpose LED Batterns in Extuted Aluminium housing including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including complete all as specified and directed. |
| 116 | S & F in repair wall mounted LED Tube light fitting 10 Watts surface mounting general purpose LED Batterns in Extuted Aluminium housing including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including complete all as specified and directed. |
| 117 | Supply and fix in repair decorative wall mounting Floretine WL 1 LS B22 SS brushed nickle finish with opal glass diffuser suitable with 9 Watt LED lamp B22 base incl suitable mounting box complete all as Specified and directed. |
| 118 | S & F in repair sleek LED Bulk head IP-66, fitting 10 watt suitable for outdoor and indoor areas in perfect synchronization with functionality and aesthetics incl suitable mounting PVC boxes complete all as specified and directed. [IP - 66 certificate shall be produce before payment] |
| 119 | M&L for sub main wiring with two single core 6.0 Sqmm PVC (FRLSH) insulated multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC Conduit medium grade ISI marked of required size 25mm dia med grade with and including PVC insulated 6.0 Sqm single core single stranded copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directedNote: 1. Two runs of cable, one run of earth wire, one run of PVC Conduit 25mm dia medium grade will be measured and paid one unit. |
| 120 | S & F in repair of Sheet Metal Enclouser Double door DB 240 volts, 12 way with rated bus bar, Single pole & neutral fixing on suitable rectanguler block, duly connected incoming and outgoing wires in DB and good finish to the old disturbed surface complete all as specified and direceted. |
| 121 | S & F in repair MCB Single Pole Neutral C Curve 230 volts of capacity 32 Amp 10 KA and current capacity in the DB complete all and specified and directed. |
| 122 | S & F in repair MCB Single Pole of Cap 6-32 Amp, C Curve 240 volts 10KA and current capacity in the DB complete all as specifeid and directed. |
| 123 | Taking down 25 Ltrs Geyser and fitting from its existing position and refixing at the same/new position duly completeing of B/R Work such as plaster , plumbing and wall painting etc complete all as spcified and as directed. |
| 124 | S&F in repair LED bed side light white in colour 7 watt lumen output 400 Lm including suitable mounting box and making connections with 2 core flexible copper wire 0.50 Sq mm Complete all as specified and as directed by Engr-In-Charge. |
| 125 | S & F in repair LED Building Security light fitting 30 watt energy saving environmental friendly long life LED Street light made up pressure die cast aluminium housing with high efficiency LEDs complete with fixing arrangements all as specified and directed. |
| 126 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender