Tender For Repair To Flooring, Joinery, Plumbing, False Ceiling And Certain Misc Repairs At Certain Bldgs Under Age B/R -Ii At Dssc Wellington
Tender Value
25 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Flooring, Joinery, Plumbing, False Ceiling And Certain Misc Repairs At Certain Bldgs Under Age B/R -Ii At Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving’s not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for in sunken floor, roof padding, etc. complete all as specified and as directed. |
| 3 | Demolition of cement concrete (reinforced) as in kitchen platform, cover slab, etc. complete all as specified and as directed. |
| 4 | Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete all as specified and as directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for in rafter, purlin, etc. complete all as specified and as directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 7 | M&L for plain cement concrete type D2 1:4:8 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete as in sunken floor, sub base floor, etc. complete all as specified and as directed. |
| 8 | M&L for applying bituminous primer not exceeding 0.35Ltr/sqm on concrete surface of any description complete all as specified and as directed. |
| 9 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application as in sunken floor/ on any concrete surface complete all as specified and as directed. |
| 10 | M&L for 25mm thick plain cement concrete type B0, 1:2:4 using 12.5mm graded crushed stone aggregate as in flooring complete all as specified and as directed. |
| 11 | M&L for rendering 15mm thick cement plaster in cement mortar 1:3 mixed with liquid water proofing compound of approved make as per manufacture instruction on wall/ floor surface of sunken floor etc. complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately. |
| 12 | Supply only liquid water proofing compound of approve make complete all as specified and as directed. |
| 13 | M&L for 75mm thick plain cement concrete type C2, 1:3:6 using 40 mm graded crushed stone aggregate as in plinth protection, paving’s, sub base of floor, etc. complete all as specified and as directed. |
| 14 | M&L for hard core of gauge not exceeding 63 mm deposited, spread & levelled in layers not exceeding 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete all as specified and as directed. |
| 15 | M&L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 16 | M&L for glazed ceramic coloured tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/ skirting laid over and including rendering 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed. |
| 17 | M&L for light shade coloured Vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 18 | M&L for light shade coloured Vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 19 | Taking down cement or cement lime plaster, any description complete all as specified and as directed. |
| 20 | M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on concrete/ brick masonry surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on concrete/brick masonry surfaces of wall, finished even and fair without using extra cement complete all as specified and as directed. |
| 22 | M&L for applying two coat of distemper oil emulsion washable on new surface over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and as directed. |
| 23 | M&L for applying two coat of exterior emulsion anti-fungal weather proof paint on external wall over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and as directed. NOTE: The painting work to be executed by authorised applicator of the manufacturer. Make:- APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac |
| 24 | M&L for applying two coats of exterior emulsion anti-fungal weather proof paint over a coat of exterior wall primer including complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth complete all as per manufacturer instructions, as specified and as directed. NOTE: The painting work to be executed by authorised applicator of the manufacturer. Make:- APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac |
| 25 | Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) built in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) and setting in mortar complete in walls and set in CM 1:4 complete all as specified and as directed. |
| 26 | M&L for precast cement concrete type C1, 1:3:6 using 20 mm graded crushed stone aggregate block masonry with solid blocks exceeding 10cm width and setting in mortar 1:6 complete all as specified and as directed. |
| 27 | M&L for reinforced cement concrete type B1, 1:2:4 using 20mm graded crushed stone aggregate as in slab supported on walls, beam and columns in floor, roof/ cooking platforms, shelves, etc. complete all as specified and as directed. |
| 28 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking platforms, etc. for fair finished surface of concrete flat complete all as specified and as directed. |
| 29 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 30 | All as per serial item No 29 here in before but using 6 to 8mm dia bars complete all as specified and as directed. |
| 31 | M&L for plain cement concrete type B-0, 1:2:4 using 12.5mm graded crushed stone aggregate as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, hold fast blocks, roof padding and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 32 | M&L for granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window cills, etc., including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed. |
| 33 | Taking down chowkhats or frames n.exc 1.5 Sqm each without taking off shutters from the frame, and making good surface complete all as specified and as directed. |
| 34 | Taking down chowkhats or frames exc 1.5 sqm but not exceeding 4 Sqm each without taking off shutters from the frame, and making good surface complete all as specified and as directed. |
| 35 | Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and as directed. |
| 36 | Taking down shutter of any description not exceeding 1 sqm each complete all as specified and as directed. |
| 37 | Dismantling of Aluminium/ UPVC partition, windows and doors of any description and any size including all fittings, mongeries, glass, etc. including making good the disturbed surface of floor or wall if any complete all as specified and as directed. |
| 38 | S&F UPVC windows Factory made UPVC white sliding windows with glazing all as per manufacturer's direction and following specifications:- (i) Window panel shall be 2.5 track frame with upvc profile section of size 95mm x 54mm having outer wall thickness of 2mm(+/- 0.3mm ) with sliding pattern with glazed and mesh shutter. (ii) Window glass shutter for (front panel) shall be made of 66mm x 42.5mm having outer wall thickness of 2.0mm (+/- 0.3mm). (iii) Window mesh shutter shall be made of 52mm x 22mm.Gauge shall be suitable wire gauge SS304 coated/ fiber black mesh. (iv) All profile of frames and sash shall be reinforced with galvanised mild steel section of 1mm wall thickness at wherever required. (v) All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanical joints. All welded joints are to be neatly trimmed & features grooved /raised nib finish so as to make the finished products free from all sharp edges & burrs. (vi) The lock shall be single point touch lock. All hardware like wheel, lock should be screwed. System shall be provided with suitable upvc beading size of 25mm x 15.5mm for glazing of size 4mm/ 5mm pinhead/ plain glass as directed. (vii) The profiles shall be cut to length and welded 45 degrees. (viii) The complete window shall be fixed into the prefinished opened place by drilling & fixing through the outer frame using high quality fasteners & silicon sealant is applied to fill up the gap between wall & window frame for leak proof installation and completion. Note: (i) The entire fixing will be done as per manufactures instructions and specification and as directed by Engg-in-charge. (ii) The unit rate quoted by contractor includes cost of glass/ wire netting and all other connected accessories. (iii) Net opening will be measured for payment purpose. |
| 39 | S&F UPVC panel door shutters with frames with approved make and section and colour with all necessary fixtures like hinges, handles, bolts etc. complete all as per manufacturer's direction and following specifications:- (i) Door frame shall be upvc profile section of size of 60mm x 60mm wall thickness of 2mm (+/-0.3mm) with openable pattern. (ii) Door shutter with sash made of 80mm x 60mm and panel shall be 10 to 15mm thick (+/- 0.3mm ). All profile of frames and sash shall be reinforced with galvanised mild steel section of 1mm wall thickness at wherever required. (iii) All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanical joints. All welded joints are to be neatly trimmed & features grooved/ raised nib finish so as to make the finished products free from all sharp edges & burrs. (vi) The profiles shall be cut to length and welded 45 degrees. Note: (i) The entire fixing will be done as per manufactures instructions and specification and as directed by Engg-in-charge. (ii) The unit rate quoted by contractor includes cost of all connected accessories. (iii) Net opening will be measured for payment purpose. |
| 40 | S&F UPVC mesh door shutters with frames with approved make and section and colour with all necessary fixtures like hinges, handles, bolts, etc. complete all as per manufacturer's direction and following specifications:- (i) Door frame shall be upvc profile section of size of 60mm x 60mm wall thickness of 2mm(+/- 0.3mm ) with openable pattern. (ii) Door shutter with sash made of 80mm x60mm. All profile of frames and sash shall be reinforced with galvanised mild steel section of 1mm wall thickness at wherever required. (iii) All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanical joints. All welded joints are to be neatly trimmed & features grooved/ raised nib finish so as to make the finished products free from all sharp edges & burrs. (vi)The profiles shall be cut to length and welded 45 degrees. (vii) Gauge shall be suitable wire gauge SS304 coated/ fiber black mesh. Note: (i) The entire fixing will be done as per manufactures instructions and specification and as directed by Engg-in-charge. (ii) The unit rate quoted by contractor includes cost of all connected accessories. (iii) Net opening will be measured for payment purpose. |
| 41 | S&F UPVC ventilator with The profile for construction of UPVC ventilator frame will be of overall size 60mm x 58mm with wall thickness 2.7 + or - 0.2 mm extruded sections. The corners will be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The ventilator will be fixed to walls using 8 mm dia 80 mm long MS screws minimum 2 Nos on each side. The 3 Nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5 mm thick pinhead glass. Note: (i) The entire fixing will be done as per manufactures instructions and specification and as directed by Engg-in-charge. (ii) The unit rate quoted by contractor includes cost of glass/ wire netting and all other connected accessories. (iii) Net opening will be measured for payment purpose. |
| 42 | S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 43 | S&F 2nd class hard wood plain solid, straight chowkhats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 44 | S&F 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and as directed. |
| 45 | S&F 30mm thick 2nd class hard wood glazed and skeleton, shutters, divided into squares to receive glass, gauge etc. (with sash bar) with plain chamfered or rounded, mitred and rebated sash bars, any numbers the size of member of shutter as specified in SSR Pt-I clause 8.24 (b) window & ventilators shutters thickness and provided with stiles and rails and fitted to chowkhat complete all as specified and as directed. |
| 46 | M&L for 4 mm thick figured glass, and glazing with oil putty/ beads in square n exceeding 0.5 sq. m in each panes complete all as specified and as directed. |
| 47 | M&L for 4 mm thick figured glass and glazing with oil putty in square not exceeding 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frame with putty or fixed with beads complete all as specified and as directed. |
| 48 | S&F galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or wire staple complete all as specified and as directed. |
| 49 | All as per serial item No 48.00 here in before but fixed in repairs to wooden frames/ steel frames complete all as specified and as directed. |
| 50 | S&F 100 mm long mild steel Butt hinges medium weight cold rolled & fixed complete all as specified and as directed. |
| 51 | S&F 75 mm long mild steel Butt hinges medium weight cold rolled & fixed complete all as specified and as directed. |
| 52 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 53 | S&F 100mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 54 | S&F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 55 | S&F 100mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 56 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 57 | M&L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth complete all as specified and as directed.. |
| 58 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing |
| 59 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing. |
| 60 | M&L for mild steel framed work such as grills, gratings, etc. with angle, joist, tee/ tubular sections and with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to quality Fe.290.Gde-E-165 including hinges, hold fast, etc. complete all as specified and as directed.. |
| 61 | S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, prong ,water tank frame work, monkey gauge etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to quality Fe-290 Gde E- 165 complete all as specified and as directed |
| 62 | M&L for applying 2 coats of synthetic enamel painting over a coat of red oxide zinc chrome on new steel surface of any description over 10 cm width or girth not otherwise described including preparation of surfaces complete all as specified and as directed. |
| 63 | M&L for applying 2 coats of synthetic enamel painting over a coat of red oxide zinc chrome on new steel surface of any description not exceeding 10 cm width or girth not otherwise described including preparation of surfaces complete all as specified and as directed. |
| 64 | Dismantling boarding any description fixed in any position with nails including iron/ SS mongeries complete all as directed. |
| 65 | S&F in repairs 18mm thick HDHMR/ HDWR board both side laminated any colour with PVC beading, as in shutter, vertical support and horizontal shelves including necessary fittings of screws/ MS brackets in kitchen cupboard and bedroom cupboard complete all as specified and as directed. Make:- HDHMR board : ACTION TESA or techno commercially equivalent |
| 66 | S&F 75mm soft close stainless steel hinges complete all as specified and as directed. Make: EBCO or techno commercially equivalent. |
| 67 | S&F 150mm long stainless steel handle complete all as specified and as directed. Make:- RICH or techno commercially equivalent. |
| 68 | S&F 600mm long stainless steel telescoping channel for drawer including necessary fitting complete all as specified and as directed. |
| 69 | M&L for prelaminated particle board exterior grade 18/19 mm thick prelaminated one side with decorative choice lamination one side and balancing white lamination on other side fixed with screw with timber frame including 6 mm thick teak wood lipping fixed with nails complete all as specified and as directed. |
| 70 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flange 40 mm complete all as specified and as directed. |
| 71 | S&F in repairs magnetic catcher for cupboards complete all as specified and directed. |
| 72 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 73 | S&F in repairs 20 mm dia fancy type decorative powder coated aluminium drapery rod including side caps and brackets complete all as specified and directed. |
| 74 | Dismantling of ceiling boards or insulation boards any thickness including cover fillets complete all as directed. |
| 75 | M&L for providing gypsum board false ceiling 10-12mm thick fixed with standard GI frame work with GI fixing channels @ 1220mm c/c and inter spaced at 610mm c/c the main fixing channels shall be fixed through GI channels suspenders from roof @ 1200 c/c, main and inter connected channel shall be fixed through fasteners clips as per manufacturer’s instructions with and including plaster of paris decorative type cornice all around at the junction of wall and ceiling etc. including applying two coats of oil bound distemper over one coat of approved primer complete all as specified and as directed. |
| 76 | S&F 9/10mm thick PVC ceiling/ wall panels of interlocking types, width 250/255mm with lamination design and exceeding 60% of PVC content including necessary H-joints, internal/ external corner trim, corner cover/J edge trims where required fixed with hidden screws including aluminium frame work frame work complete all as specified and as directed. |
| 77 | S&F in repair stainless steel kitchen baskets (SS-304) of size 544mm x 505mm x 200mm complete all as specified and as directed. Make :EBCO cat No: RA-BCCS1-21-20-8 or equivalent in HETTICH/KAFF/GODREJ |
| 78 | S&F in repair stainless steel kitchen baskets (SS-304) of size 544mm x 505mm x 100mm complete all as specified and as directed. Make :EBCO cat No: RA-BCCS1-21-20-4-CT or equivalent in HETTICH/KAFF/GODREJ |
| 79 | S&F in repair stainless steel kitchen baskets (SS-304) of size 530mm x 505mm x 200mm complete all as specified and as directed. Make :EBCO cat No: RA-21-20-8 or equivalent in HETTICH/KAFF/GODREJ |
| 80 | Taking down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed. |
| 81 | Taking down 20 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed. |
| 82 | S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc. complete all as specified and as directed. |
| 83 | S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc. complete all as specified and as directed. |
| 84 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and as directed. |
| 85 | S & F as in repairs Viterous china wash down water closet pan (pedestal pattern) with \\"P\\" or \\"S\\" trap incl fixing bolts, PVC bend, seat cover and connecting to PVC (SWR) pipe complete all as specified (Excl fixing bolts, flush tank & flush Pipe) complete. |
| 86 | S&F as in repairs PVC valveless, symphonic action type low level flushing cistern (Duel flush) white with inlet, ball valve, float and handle etc. complete 10 litres capacity including brackets, plush pipe connected to IWC/ EWC complete all as specified and as directed. |
| 87 | S&F in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete (Excl fixing bolts, flush tank & flush Pipe) |
| 88 | S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange(without hand & overhead shower) Make: Cat No G4617A1 of Parryware/ F730022 of Hindware/ CON -281KN of Jaquar complete all as specified and as directed. |
| 89 | S&F in repairs vitreous china white wash hand basin of size 550mm x 400mm, flat back with and including brass chromium plated waste fitting 32mm bore (dia) and PVC waste pipe 32mm bore (dia) of Low or High density, a Pair of cast iron brackets or erecting stand duly painted but excluding taps, chain, plug & porcelain stopper, cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 complete all as specified and as directed. |
| 90 | S&F in repairs 15mm bore (dia) bib tap cast copper alloy, chromium plated, fancy type with crutch or butter-fly handle, screwed down, screwed for Iron pipe or for brass Ferrule complete all as specified and as directed. |
| 91 | S&F in repairs 15mm bore (dia) pillar tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for Iron Pipe complete all as specified and as directed. |
| 92 | S&F in repairs PVC Waste Pipes 32mm/ 40mm bore (dia) suitable for wash hand basin, sinks, urinals, etc., complete all as specified and as directed. |
| 93 | S&F in repair 15 mm bore, central hole basin mixer without popup waste system with 450mm long braided hoses complete all as specified and as directed. Make:- Cat No - G4715A1 of Parryware/ F730009 of Hindware/ CON-169KNB of Jaquar or equivalent. |
| 94 | S&F in repairs 15 mm bore, two way bib cock, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed. Make:- Cat No.CON-041 of Jaquar or T3534A1 of Parryware or equivalent. |
| 95 | S&F in repair health faucet including 1.2m long flexible tube and wall hook complete all as specified and as directed. Make: Cat No. E8342A1of Parryware/ F160001 of Hindware/ ALD-CHR 565 of Jaquar or equivalent. |
| 96 | S&F in repair overhead shower 200 mm x 200mm including shower arm 20mm dia & 375 mm long round shape with 90 ° bend for wall mounted showers with flange complete all as specified and as directed. Make:- Cat No T9975A1,T-9802A1 of Parryware/ F160142,F160024 of Hindware/ OHS-CHR-1619,SHA-479L450 of Jaquar or equivalent. |
| 97 | S&F in repairs 15mm bore angular stop cock, cast copper alloy, chromium plated, fancy type with long shank conforming to IS, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. Make- Cat No.CON-053KN of Jaquar or G3053A1 of Parryware or equivalent. |
| 98 | S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed. |
| 99 | S&F in repair 15 mm bore, single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as specified and as directed. Make:- Cat No G3335A1 of Parryware/ Cat No F320027 of Hindware/ Cat No DRC-37165 of Jaquar or equivalent. |
| 100 | S&F in repair 75mm dia PVC (SWR) floor trap with cockroach trap and grating (double bowl type) with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed. |
| 101 | S&F in repair 100mm dia PVC (SWR) multi floor trap (circular/square) with and including grating of size (100mm x 100mm or 100mm dia) complete all as specified and as directed. |
| 102 | S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6kg/sqcm fixed complete to walls, ceilings or in floors, etc. complete all as specified and as directed. |
| 103 | S&F in repairs coloured PVC toilet cabinet of size 430mm x 330mm with looking mirror including making good the disturbed surfaces to match with existing one complete all as specified and as directed. Make: Prayag Cat No 551 or equivalent. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender