Tender For Addition Alteration Of Bldg No. T-25 (Offrs Mess) At Hq 6 Sect Repair Renovation Under Age (I) Cif (R ).
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
3 days left
EMD
19410
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration Of Bldg No. T-25 (Offrs Mess) At Hq 6 Sect Repair Renovation Under Age (I) Cif (R ).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in any type of soil n. exc 1.5m wide & n. exc 1.50m in depth for foundations for shafts, wells, cesspits, manholes, pier holes & getting out complete all as specified and directed |
| 2 | Material and labour for plain cement concrete 1:5:10 type E-2 (using 40 mm graded aggregate), as in foundation filling and mass concrete, complete all as specified and directed. |
| 3 | Removing excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point. |
| 4 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified. |
| 5 | M&L for good soil from outside of MD land for back filling of retaining wall as aproved by Engr-in Charge. |
| 6 | M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 using old size bricks complete all as specified and directed by engr-in-charge. |
| 7 | M&L for rendering 15mm thick on external faces of brick or concrete surfaces in cement mortar (1:4) on walls finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&l for preperation of new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified. |
| 9 | M&L for rendering 10mm thick on internal faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth without using extra cement complete all as specified . |
| 10 | M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper over a coat of primer, complete all as directed. |
| 11 | M&L M25 design mix as in beam using 20mm graded agg above the cill level through out the wall including necessary formwork etc. |
| 12 | Material and labour mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 13 | Material and labour mild steel TMT bars, 5mm dia and over , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed. |
| 14 | Vetrified Ceramic tiles (Dark Shade) 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 10mm thick in cement mortar (1:4) base, complete all as specified. |
| 15 | All as per item No above ,but as in skirting over 10mm thick rendering in cement mortar 1:3, set and jointed in neat cement slurry and pointed in white or colour cement to match complete. |
| 16 | M&L for Glazed ceramic coloured tiles in vertical surface 350x250x 7 mm/450x350x7mm thick laid over 10mm thick rendering in cement mortar 1:3, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by engr-in-charge. |
| 17 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in sub floor finished even and rough to receive the topping layer (w/o using extra cement) complete all as specified and directed. |
| 18 | S& F in position suspended anodised aluminium false celling grid system using E-gird suspended celling grid system.The size of grid shall be 605X605mm fixed inthe grid of E-grid susended celling grid system duly suspended by 6mm dai GI(upto 1200mm length) adjusting level fixed to roof slab by means of celling cleats made out of GI flat 40X3 mm size long and expantion hold fastencer 12.5mm dai 40mm long and 6mm thick calcium silicate boards of silicous and calcareous material reinforced with cellulous fibre for fixing in 600X600mm grid complete all as spcified and dircted. |
| 19 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engr-in-charge. |
| 20 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 21 | Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 22 | S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed. |
| 23 | S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed. |
| 24 | S & F floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors . |
| 25 | S&F butt hinges 100mm, cold rolled medium weight mild steel all as specified. |
| 26 | S&F steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed . |
| 27 | Supply and fixing in repair, bib tap long nose screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, screwed down suitable for 15mm bore pipe or union, complete all as specified. |
| 28 | Supply and fixed in repair stop valves, 15 mm dia pipe, chromium plated, fancy type, ISI marked, screwed down, high pressure with crutch or butterfly handle (concealed type) with long shank, screwed both ends for iron pipes or for unions, complete all as specified. |
| 29 | Supply and fixing in repair angle valve, 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with capstain head, heavy with adjustable wall flange, complete all as specified. |
| 30 | Supply & fixed in repair vitreous china wash hand basin white flat back of size 550x440mm including CI brackets,e, including cutting for and pinning in ends of brackets or erecting stand including 32mm Waste coupling of PTMT(half or full threaded) . complete all as specified. |
| 31 | Supply & fixed in repair PVC connection 15mm size with brass nuts of length 450mm complete all as specified. |
| 32 | M&L 50mm thick PCC (1:2:4)type B-1 (using 20mm graded coarse aggregate )over 75mm thick PCC (1:3:6)type C-2 (using 40mm graded coarse aggregate ) laid to an outward slope 1:12 as in plinth protection complete all as specified and directed. |
| 33 | M&L for forming 6/10mm th expansion joint filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound. |
| 34 | Supply and fixing tubular steel work in vertical posts, rafters, purlins, etc including special shaped washer and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. |
| 35 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to Fe 290 ( gde E-165) all as specified. |
| 36 | S&F mild steel work as in wind ties for roof including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 37 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 38 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standardtubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up thegaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaske etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically herever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 39 | S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 40 | S&F 5.5 mm thick sheet glass ordinary quality and fixed to shutter exc. 0.50 Sqm in each pane fixed to frame all as specified. |
| 41 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 42 | S&F 4 mm thick sheet glass ordinary quality and fixed to shutter n exc. 0.50 Sqm in each pane fixed to frame all as specified. |
| 43 | S&F brass 2 levers Mortice lock,vertical type, size100 mm etc |
| 44 | S&F Door closer cast iron body hydrau lically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed |
| 45 | M&L 40mm Damp proof course (1::2:4) type B-0 to horizontal or vertical surfaces including necessary formwork |
| 46 | Supply & Laying of one number PVC insulated and PVC sheathed / XLPE armoured power cable of 1.1 KV grade of cross sectional area 16 sqmm, 2 core size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required, specified and as directed. |
| 47 | Supply & Laying of one number PVC insulated and PVC sheathed / XLPE armoured power cable of 1.1 KV grade of cross sectional area 16 sqmm, 2 core size direct in the existing RCC/ HUME/ METAL pipe as required, specified and as directed. |
| 48 | Supply & Laying of one number PVC insulated and PVC sheathed / XLPE armoured power cable of 1.1 KV grade of cross sectional area 16 sqmm, 2 core size on wall surface (clamped with 1mm thick saddle) as required, specified and as directed. |
| 49 | S & F Steel pipe glavanized light grade of 32/40 mm core laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete ass as specifed. |
| 50 | Material and labour for point wiring with 1.5 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade drawn in and including PVC casing and capping of suitable size or rigid non metallic PVC concealed conduit (medium grade) of suitable dia fixed to wall/ceiling including PVC closed recessed boxes ISI marked with suitable 1.2/1.6 mm thick plastic laminated sheet top cover or including modular pressed steel sunken boxes of required size with modular cover plate with frame for mounting modular switches, sockets, fan regulators etc incl 1.50 sqmm (nominal area) PVC insulated and sheathed multistranded copper conductor cable FRLSH 1100 volts grade single core earth continuity conductor connected to common earth dolly all as directed and specified for the followings. |
| 51 | One light /fan point controled by one 5/6 Amp switch |
| 52 | One 3 pin socket outlet 5 Amps on same board. |
| 53 | One 3 pin socket outlet 5 Amps on indpendent board |
| 54 | All as per item No 1 here in before but point wiring with 4 sqmm FR multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board, complete all as specified and directed. |
| 55 | Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed. |
| 56 | Supply and fixing of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed. |
| 57 | Supply and fixing of modular switch single pole one way 16 Amps 1 module complete all as specified and directed. |
| 58 | Supply and fixing modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and directed. |
| 59 | S&F LED Indoor Wall Light, Antique Bronze Durable Frame & Ambient Glow Diffuser, B 22 holder 9 wattage LED compatible, suitable for living/dinning hall complete all as specified & directed. Make : Havells model :- LHFOBCD1TZ1O7X5 |
| 60 | S&F of Ultra slim warm/off white LED light to new 36W, 6500 K LED recess mounted bakelite panel 2 x 2 luminaire suitable for surface/grid ceiling for low ceiling applications complete with tube, driver and connecting cable including making electric connection to ceiling rose or connector including taking down old unserviceable luminaire, complete all as specified and as directed. |
| 61 | M&L for replacement of Integral LED security light luminaire 60W LED 230 volts made of pressure die cast aluminium housing powder coated with high power SMD LED’s lens & toughned glass IP-66, Luminaire efficacy >=125 Lumens per Watt ,Secondary optics for better light distribution, having two nos Potted driver(OEM)(one inbult and one spare potted driver) 4KV internal +10KV SPD, THD<10%, pf>0.95 and taking down old unserviceable light fittings any type/wattage complete all as specified and as directed. Make: HPL cat ref No.HPLLEDSL60CWEGLA or equivalent Philips or wipro |
| 62 | S&F 12 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth point, powder painted complete all as specified. Note:- MCB SP & SPN measured separately. |
| 63 | Supply and fix of MCB SP-06 to 32 Amp as per site requirement, 240 volts complete all as specified. |
| 64 | Supply and fix of MCB SPN 32-63 Amp as per site requirement, 240 volts 50Hz AC supply, complete all specified. |
| 65 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole 63A MCB complete all as directed. |
| 66 | Materials and Labour for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5M below normal ground level connected to galvanised earth lead wire 4.0 mm dia with bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm (Reinforced with 8 mm dia. TMT bars @ 150 mm, center to center both ways) with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 25 mm bore galvanized steel tubing light grade for protection of earth lead connection for earth lead wire upto 3m length complete, necessary excavation and earth work in any type of soil and including necessary testing complete as specified and directed. |
| 67 | S&F Earth continuity conductor passing through PVC Conduit of size 25/40 mm main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 4 mm galvanised wire complete all as specified and directed by Engr-in-Charge. |
| 68 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ NIL during AOCNote:- Tenderers shall not quote for this Schedule Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender