Tender For Special Repair To Bldg No T-43 Of Cg Bn At Base C -Ii And Special Repair To Bldg No T-132A, T-132B And P-15 Of Arty Regt At Base C -I Under Ge 873 Ews
Tender Value
31.49 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
2 days left
EMD
63000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-43 Of Cg Bn At Base C -Ii And Special Repair To Bldg No T-132A, T-132B And P-15 Of Arty Regt At Base C -I Under Ge 873 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 2 | S&F Galvanised MS sheeting of 0.63mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hooks two framed work with PVC and steel washers as in roof & wall with Zinc coating of 275 complete all as specified and as directed. |
| 3 | All as per item No 2 above but except sheets complete all as specified and directed. |
| 4 | S&F plain, galvanised MS sheeting of 0.63mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 5 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets complete all as specified and as directed. |
| 6 | M&L 9 mm thick prelaminated partical board, interior grade ,prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with nails as in wall panelling complete all as specified and as directed. |
| 7 | M&L 9 mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with nails as in ceiling works complete all as specified and as directed. |
| 8 | Dismantling timber framed in fillets, rails, posts rafters, purlines, etc under 40 Sq cm in section complete all as specified and as directed. |
| 9 | M&L second class softwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm complete all as specified and as directed. |
| 10 | M&L second class softwood plain fillets, rectangular in section, clean swan, secured with nails exc 3 and n.exc 6 Sqcm complete all as specified and as directed. |
| 11 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 SQMs each complete all as specified and as directed |
| 12 | Supply and fix steel window with side hung double shutters of gauzed shutter openable inside and glazed shutter openable outside with projecting type hinges , steel handles and steel peg stay with glazing bars dovetailed or welded and ventilator fixed type complete all as specified and as directed |
| 13 | M&L 4mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 14 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed |
| 15 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.(Steel/Wooden) complete all as specified and as directed. |
| 16 | S&F 2nd Class H.W Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows, ventilator stilles and rails provided as per SSR part -I Sector 8 clause 8.24 (b) complete all as specified and as directed. |
| 17 | S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 18 | S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed. |
| 19 | S & F in Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 20 | S & F in Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 21 | M&L for painting to wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc complete all as specified and as directed. |
| 22 | Supply & fix MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed. |
| 23 | S & F butt hinges 100mm mild steel cold rolled, medium weight complete all as specified and as directed. |
| 24 | Supply & fix MS barrel tower bolt 150mm long stove enamelled black, complete all as specified and as directed. |
| 25 | Supply & fix MS barrel tower bolt 100mm long stove enamelled black, complete all as specified and as directed. |
| 26 | S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 27 | S &F in repairs stainless steel squatt pan/wc orissa pattern with integral foot rest (excluding flushing ciestern and flush pipe) incl P or S trapb,set in incl concrete bedding etc as in repars incl making good complete all as specified and as directed. |
| 28 | S & F of Extruded aluminium alloy handles fabricated type anodised 125 mm size complete all as specified and directed. |
| 29 | S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed, complete all as specified and directed. |
| 30 | S & F in repair Curtain rail Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc and fixed, complete all as specified and directed. |
| 31 | M&L for PCC 1:3:6 type C2 75mm thick using 40 mm graded crushed stone aggregate as in plinth protection and Finishing cement concrete surface even and smooth with out using extra cement complete all as specified and as directed. |
| 32 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 33 | M & L Framed brecket of angals or tee with web and flanges cut to shape, drilled and countersunk for screw,including bending and wending angles as necessary gusset plates, riveting, etc n exc 10 kg each brackets conforming to Fe-290 Gde-E-165 Brackets over 10 kg each to be measured under Structural Steel) complete all as specified and directed. |
| 34 | M & L for Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. complete all as specified and directed. |
| 35 | S & F Steel work in tubular trusses including special shaped washer etc. completed using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified and directed. |
| 36 | Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide complete all as specified and as directed |
| 37 | M &L for Preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 38 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness complete all specified and directed |
| 39 | M&L 25 mm thick plain cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate) as in floor complete all as specified and as directed. |
| 40 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to stores and rubbish off the premises etc complete all as specified and as directed. |
| 41 | M&L for Rendering 10 mm thk in CM (1:3) as in backing coat of cement plaster for laying of wall tiles etc: complete all as specified and directed. |
| 42 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick in Cement Mortar 1:4 for laying floor finishes complete all as specified and as directed. |
| 43 | Dismantling of tiles of any description or thickness in floors complete all as specified and directed |
| 44 | Material and labour for glazed ceramic coloured wall tiles of approved colour of size 350x 250x 7/ 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 and including 20mm thk screed bed complete all as specified and as directed |
| 45 | M&L for Glazed (Coloured) ceramic tiles in vertical surfaces 300 x 450 x 8 to 9 mm/ 450 x 350 x 8 to 9 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 46 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20 mm complete all as specified and directed. |
| 47 | 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia complete all as specified and as directed. |
| 48 | Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 49 | M&L 15mm thick rendering on external wall of brick work or concrete surfaces in cement mortar 1:4 , is to finsihed the surfaces even and fair.(With water proffing compound) wpc measure separately complete all as specified and as directed. |
| 50 | Supply only integral water proofing compound complete all as specified and as directed. |
| 51 | M&L, Rendering 10mm thick on fair faces of brick work finished even and smooth without using extra cement in CM 1:6, complete all as specifeid and directed. |
| 52 | M&L 5mm thick rendering on Ceiling of brick work or concrete surfaces in cement mortar 1:3 , is to finsihed the surfaces even and fair complete all as specified and as directed. |
| 53 | M&L, for prepartion of newly plastered wall surfaces of any description applying Two coat of cement base paint, over primer complete all as specified and as directed. |
| 54 | M&L, for prepartion of Old plastered wall surfaces of any description applying Two coat of cement base paint, complete all as specified and as directed. |
| 55 | Material and labour for preparation of newly plastered wall surface and applying three coats of white wash and a coat of primer on internal wall .complete all as specified and directed. |
| 56 | Material and labour for preparation of old plastered wall surface and applying three coats of white wash and a coat of primer on internal wall complete all as specified and directed. |
| 57 | Material and labour for preparation of newly plastered surface on ceiling and applying three coats of white wash and a coat of primer on complete all as specified and directed. |
| 58 | Material and labour for preparation of old plastered surface on ceiling and applying three coats of white wash and a coat of primer on complete all as specified and directed. |
| 59 | Dismantling/ demolition of any thickness polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from the site etc complete all as specified and directed |
| 60 | Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed. |
| 61 | M&L cement concrete type B-0, 1:2:4 mix (12.5 mm graded agg) in padding, roof kerbs or mud stops. rounded or chamfered on edges and similar work complete all as specified and as directed. |
| 62 | M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) M&L for preparation of roof surfaces by brushing, cleaning and Applying a priming coat with bitumen primer @ 0.5 ltr/Sqm (b) Applying a hot blown bitumen grade 85/25 @ 1.2 Kg/sqm c) Laying APP modified water proofing membrane weighing not less than 3 Kg/Sqm will be laid over applied bitumen. (d) Applying a tack coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm and sand in confirming to Zone II in dry condition will be dusted over the bitumen @1.00 Kg/Sqm |
| 63 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 64 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25 mm complete all as specified and directed. |
| 65 | 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 25 mm dia incl complete all as specified and as directed. |
| 66 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 67 | S & F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position etc complete all as specified and directed |
| 68 | S&F 15mm bore bib taps cast copper alloy, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete and fixed in repairs complete all as specified and as directed. |
| 69 | Supply and fixed in repairs stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified and as directed. |
| 70 | Demolition of PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc complete all as specified and directed |
| 71 | S&F in repairs vitreous china wash hand basin of 550mmx400mm white flat back , CP waste coupling including angle iron brackets of 35x35x6mm etc complete all as specified and directed. |
| 72 | S & F in repairs pillar taps cast copper alloy 15mm bore with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 73 | S & F in repairs 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 74 | S & F in repairs 15mm Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed complete all as specified and directed. |
| 75 | S & F in repairs PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 76 | Supply and fix in repairs PVC flexible waste pipes 32/38 mm bore 80 centimetre long complete all as specified and as directed |
| 77 | Dismantling / taking down PVC/ Cast iron soil /waste pipes 110 mm / 75mm bore including all fitting like bends etc complete all as specified and directed |
| 78 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor 110mm bore complete all as specified and directed. |
| 79 | S &F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. |
| 80 | S&F in repairs PVC waste pipes of 40/32 mm bore heavy duty thick type suitable for wash hand basin /sinks complete complete all as specified and as directed. |
| 81 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floor of 75mm bore complete all as specified and directed. |
| 82 | PVC bend any radius size 110mm bore with access doors complete all as specified and directed. |
| 83 | S&F in repairs 600x450mm bevelled edge looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood & fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed. |
| 84 | S & F in repairs aluminium anodised tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and directed. |
| 85 | Supply and fix in repairs of 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and as directed |
| 86 | Dismantling of water tanks 1000 litres capacity of any description and removing to store complete all as specified and directed. |
| 87 | Supply and Installed puff water tank capacity 1000 Ltrs insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature (-) 30 degree to (+) 35 degree celcius fixed in position with all fittings over PCC plate from complete all as specified and as directed. |
| 88 | S&F for PP-R Outer dia of pipes in 25mm Gate valves (brass insert) as per requirement of the site etc complete all as specified and as directed. . |
| 89 | S &F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball ball screwed for iron pipe and fixed.(Minimum weight 15 mm-142 gms /20 mm-210 gms/25 mm -455gms/40 mm-690 gms ) complete all specified and directed |
| 90 | M&L for 20mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and directed. |
| 91 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete as specified and directed. |
| 92 | M&L for 100 mm thick PCC 1:4:8 type D2 (40mm graded aggregate) as in sub base complete all as specified and as directed. |
| 93 | M&L for providing cement cencrete types C-1 1:3:6 (20 mm agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 94 | Taking down carefully copper/ aluminum point wiring incl light fitting & fixtures of any type and description for taking credit and making good disturbed surface of walls, floors, etc. complete all as specified and directed. |
| 95 | M&L for point wiring for one light or one fan or one bell point controlled by one switch with using 1.5 Sqmm single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 1100V grade drawn through with incl PVC casing in capping (size of as required at site but not less than 20mm) with accessories like bends tees, junction boxes and terminal boxes for mounting fittings etc. fixed on recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC insulated but unsheathed multistrandard copper conductor cable 1100V grade as earth continuity wire connected to common earth dolly with incl suitable size switches /sockets modular PVC board with modular cover plate ISI marked fire retardent as required at site complete all as specified and directed. |
| 96 | All as per Serial item No 95 above but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on same board |
| 97 | All as per Serial item No 95 above but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on independent board. |
| 98 | All as per Serial item No 95 above but point wiring with using 2.5 sq.mm (nominal area) copper PVC insulated unsheathed stranded copper conductor incl same size continuous earth wire on independent board for one 5/6 pin switch socket outlet combination, 5 &15 amps (independent) |
| 99 | S & F Modular switch 1 way 10A, 1 module |
| 100 | S & F Modular switch 1 way 20A, 1 module |
| 101 | S & F modular bell push 230 volts, 5 Amps, single pole |
| 102 | S & F in replacement Modular Socket, 10A - 3 pin, 2 module |
| 103 | S & F in replacement Socket 10A/20A - 2/3 pin combined, 2 module |
| 104 | S & F ceiling rose surface bakelite, three terminals |
| 105 | S & F Bell Buzzer/ Ding Dong AC. 230 volts |
| 106 | S & F switch piano type 230 volts, 5 Amps, single pole |
| 107 | S & F Socket out let 2 in 1, 3 pin, 5 Amps flush type 230 volts |
| 108 | S & F switch Socket out let combination 2 in 1, 3 pin, 5 Amps flush type 230 volts |
| 109 | S & F switch Socket out let combination 2 in 1, 6/5 pin, 5 &15 Amps flush type 230 volts |
| 110 | M & L for in replacement of sub main wiring using two single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 4 Sq.mm of 1100 Volts voltage rating drawn through and including PVC casing caping of size not less than 25mm with standard accessories, along-with one run of FRLS PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sq.mm as earth continuity conductor complete all as specified and directed.Note : Two run of single core FRLS PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
| 111 | Supply, fixing, connecting and testing sheet metal enclosures double door type for using MCBs suitable for single pole and neutral, 8 way with having copper bus bars suitable for 200 amps rating including taking down old unserviceable one complete all as specified and as directed. |
| 112 | Supply, fixing, connecting and testing sheet metal enclosures double door type for using MCBs suitable for single pole and neutral, 4 way TPN with having copper bus bars suitable for 200 amps rating including taking down old unserviceable one complete all as specified and as directed. . |
| 113 | S & F in replacement MCB Triple pole & neutral (TPN), 32 to 63 Amps, 240 volts, 10KA, ‘C’ series, with proper size lugs and connections complete all as specified and as directed. |
| 114 | S & F in replacement MCB single pole & neutral (SP&N), 16 to 32 Amps, 240 volts, 10KA, ‘C’ series, with proper size lugs and connections complete all as specified and as directed. |
| 115 | S & F in replacement MCB single pole (SP) 6 to 32 Amps, 240 volts, 10KA, ‘B’ series, with proper size lugs and connections complete all as specified and as directed. |
| 116 | S & F LED light fitting mirror type with high out put diffuser 2 feet, 10/12 watt 220 V AC Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square shape, Beam Angle 120° including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 117 | S & F Surface and wall mounted high efficacy 1x20 watt LED LED lighting fixture with extruded polycarbonate, Beam Angle 120° environmental friendly complete with all accessories internally pre wired and including connection up with twin core flexible copper conductior cable complete all as specified and as directed. |
| 118 | S& F for Surface Spotlight 10 watt with adjustable light system to achieve the desired illumination angle including connection up with twin core flexible copper conductior cable complete all as specified and as directed. |
| 119 | S & F LED 10 watt inverter polycarbonate channel batten , Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours suitable for 180 volt to 250 AC volt, complete all as specified and directed |
| 120 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 121 | S & F Square shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 122 | S & F for outdoor type IP66, Energy saving LED street light fitting 30 Watt 230 V AC with PDC Aluminium body & Secondary optical lens for superior light distribution. Efficacy >100 Lm/W. with street light bracket complete all as specified and directed. |
| 123 | S& F in replacement Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed |
| 124 | Supply, laying and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminium conductor, 1100 Volts grade, of size 16 Sqmm 4 Core complete all as specified and as directed. |
| 125 | Excavation, sand cushioning, protective covering and refilling the trench etc as required for LT UG XLPE power cable of 1.1 KV grade of upto 35 sqmm of any core complete all as specifed and directed. |
| 126 | S& F in replacement steel body 300 mm sweep exhaust fan , heavy duty 230 volt complete all as specified and directed |
| 127 | M & L for maintenance free GI earthing Electrode 2 mtr length shall be based on ready capsule type, Pipe-in-Cage technology concept in which, One Galvanized hollow pipe (Electrode) 50 mm dia filled with a specially developed earth enhancement material (EEM) made up of Conductive Cement, Graphite carbon powder, Sodium montmorillonite/ Sodium Bentonite Powder, Hydrous aluminum silicate etc. to reduce earth resistivity, 50kg Chemical , GI earthing Electrode buried directly in ground vertically to a depth not less than 2.0 meter below normal ground level and connected by means of galvanized bolts, nuts and washers with including necessary earth work and RCC moulded earth pit with cover, 15 mm dia pipe with watering funnel and GI earth wire 4.0 mm dia upto 7.5 RM connecting to MCB DB complete all as specified and directed and taking out old unserviceable earthing of any position |
| 128 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender