Tender For Repairs To Compound Wall And Fencing, Including Painting For Otm Areas At installation Shivaji, Lonavla (8460/E8)
Tender Value
35 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
13 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Compound Wall And Fencing, Including Painting For Otm Areas At installation Shivaji, Lonavla (8460/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in CM incl all quoins, arches, pillars, etc, complete all as specified and directed . |
| 2 | M&L for walling or random rubble , uncoursed well bonded, bedded and solidly, hearted built in CM 1:6 etc complete all as specified and directed. |
| 3 | -do- all as per item No 2 above but except stones complete all as specified and directed. Note- Serviceable stones obtained vide item No 01 shall be reused after removing mortar and cleaning with water complete all as specifed and directed. . |
| 4 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints with max depression on face from straight edge held against the dressed surfaces not exc 40 mm as specified of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.Note: Hidden portion of stone masonry shall not be hammer dressed complete all as specifed and directed. |
| 5 | M&L Pre-cast AAC blocks masonry GR-1 of size 600x200x100/150/200mm and setting in CM 1:6,complete complete all as specified and directed |
| 6 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 7 | M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual and taking down of plaster complete all as specified and directed. |
| 8 | Supply only liquid WPC |
| 9 | M&L For Raking out joints/ pointing random rubble or polygonal rubble uncoursed or brought up to courses on edge in floors, surface channels, roofs, etc at any height complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L For Flush pointing t to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 at any height complete all as specified and directed by Engr-in-Charge. |
| 11 | Demolition of cement concrete unreinforced in of any desciption and in any position including removal of dabbries from outside of MoD landcomplete all as specified and directed by the EIC. |
| 12 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching and all other similar works including necessary formwork complete all as directed. |
| 13 | Providing precast cement concrete (1:2:4 type B-1 with using 20mm graded stone agg) as in landings, cover slabs (for manholes etc). Chulah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed. |
| 14 | M & L mild steel TMT bars 8 mm to 10 mm dia cut to length bent to shape required incl cracking bending spirally, hooking and binding with & incl MS wire 0.9 mm dia etc complete all as specified and directed. |
| 15 | M&L for precast cement concrete louvres and jallies, Type (1:2:4) 12.5mm greaded aggregate set in CM 1:4, 25mm thick (measured solid), including all mouldings with precast frame and all other similar works including necessary formwork complete all as directed. |
| 16 | M&L for preparation of new plaster surface & apply two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer on new plasterd surfaces od wall and obtain smooth finish using sand paper complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge. |
| 17 | M&L for complete removal of existing treatment by jetting with spray and preparation of surface and applying two coat of Acrylic smooth exterior antifungal emulsion paint over one coat of acrlic exterior primer complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge. |
| 18 | M&L for preparation of old surface and applying onr coat of Acrylic smooth exterior antifungal emulsion paint complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge. |
| 19 | M & L for preparation of old stone, concrete surfaces of any description (Removal of algae/Fungal patches/Durt etc) and applying one coat of exterior plastic emulsion paint (Weather Coat) on old footpath/colour tiles/ kerb stone etc (colour and pattren as per approved by EIC ) complete all as specified and directed. |
| 20 | Cleaning of surface with water jet spray machine and using wire brush by scrpping and rubbing down, complete all as specified and directed. |
| 21 | Dismantling of fencing post or strut (wood or RCC) any section, posts embeded in concrete, brick work, masonery etc, including taking out embeded portion in concrete, removal of dabbries from defence land and making good disturbed ground complete all as specified and directed by EIC. |
| 22 | Dismantling of barbed wire any type complete all as specified and directed. |
| 23 | Dismantling of concertina coil of any size any description fixed on posts or angle of any kind all as in fencing complete all as specified and directed. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specifed and directed by EIC. |
| 25 | Excavating in Post holes (or similar holes) each n exc. 0.5 cum,getting out,returing,filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25cm,watering,and removing surplus soil to a distance n exc 50m and making good surface and directed by EIC. |
| 26 | M&L for PCC 1:4:8 (type D2) using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 27 | S&F Angle Iron and FI,balusters,nosing to steps including embeding in concrete and screwing etc.securing bolts;posts and struts in fencing including cutting tops tob shape as directed,drilling holes,notching for wire,etc.;flat iron fillet (for securing wire mesh etc.,and similar work conforming to Fe 290. Gde E-165, complete all as specified and directed by EIC. |
| 28 | Supply only Chain link MS galvanisd fencing, any size or type, complete all as spd and directed by EIC. |
| 29 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire, complete all as spd and directed by EIC. |
| 30 | S&F Mild Steel screw bolts (machine made) dia of neck in 5 to 10mm with hexagonal or sqaure heads at one end and screwed the other, or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut,exc 5 cm but n.exc 10cm long, complete all as spd and directed by EIC. |
| 31 | S&F in repair two strand galvanised steel barbed wire 2.24mm dia barbed with 2mm dia bars @ 75mm spaciang and fixed to any type started rails strained bolts incl securing or tying at closing with and provn of galvanised mild steel wire staples or steel pins. |
| 32 | S&F for 600 mm dia concentrina spiral coil fencing with punched tape and 6 m max openable length, on wall with angle iron Y shaped with 9 horizontal RBT reinforced barbed wire studied with GI staples and GI clips to retain horizontal incl necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of EIC, with reinforced barbed wire tape (RBT)/spring core (2.5 mm thick) wire of tensile strength of 165 kg/sqmm with tape (0.52mm thick) complete all as specified and directed by Engr-in-charge. |
| 33 | M & L for Preparation of New painted steel surfaces of any description having width/girth exceeding 10cm and apply Two coat of anti corossive epoxy paint over one coat of epoxy primer complete all as specified and and directed by EIC. |
| 34 | M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and apply Two coat of anti corossive epoxy paint over one coat of epoxy primer complete all as specified and as directed by EIC. |
| 35 | Demolition of Concrete (unreinforcement concrete) of any description and in any position not otherwise specifically provided for, and removal of demolished materials out of MD land complete all as specified and as directed by Engr in Charge. |
| 36 | M & L for hardcore of gauge n exc 63 deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface etc complete all as specified and directed by Engr in Charge. |
| 37 | M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base all as specified and directed by Engr in Charge. |
| 38 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / any paved area complete all as specified and directed. |
| 39 | M & L for glazed chequered tiles glossy finish of size 300 x 300 x 22-25 mm thick (colour and glazed approved by EIC) with cement and pigments laid over 20 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for Durastone designer parking tiles (square/rectangular ) area of each tile exc 0.09 Sqm but not exc 0.72 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick screed bed of CM 1:6 complete all as specified and directed. |
| 41 | M&L for Providing, cement concrete type B 0 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges and simillar work etc complete all as specified and directed by Engr in Charge. |
| 42 | DIsmantling of Stone slabs and tiles laid, bedded and pointed in any mortar, of any description or thickness in floors, aprons etc complete all as specified and directed by Engr in Charge. |
| 43 | M&L for refixing of old tile rubber moulded 60 mm thk interlocking paver block any shape & size with cement and pigment grade complete all as specified and directed by Engr in Charge. |
| 44 | Providing and laying 60mm thick glossy finish factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete. |
| 45 | M&L for refixing of old tile rubber moulded 80 mm thk interlocking paver block any shape & size with cement and pigment grade complete all as specified and directed by Engr in Charge. |
| 46 | Providing and laying 80mm thick glossy finish factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 47 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender