Tender For Provn Of Certain Sanctioned Works At South Of Rly Line And Provn Of Arboriculture For Childern School At Missamari Mil Stn Under Ge Missamari
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jul 2026
12 days left
EMD
99140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Sanctioned Works At South Of Rly Line And Provn Of Arboriculture For Childern School At Missamari Mil Stn Under Ge Missamari
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation in soft/loose soil, n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out, complete all as directed. |
| 2 | Excavation in trenches n.exc. 1.5 m width and n.exc. 1.5 m in depth for foundation, laying of UG cable, pipe etc in soft/loose soil & getting out, complete all as directed. |
| 3 | Returning filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 4 | Removing excavated material (soil) n exc 50 m & depositing where directed at a level n exc 1.5 m, complete all as directed. |
| 5 | Surface dressing in soft loose soil n exc 15 cm deep and getting out, complete all as directed. |
| 6 | Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil & getting out, complete all as directed. |
| 7 | Excavating over areas, exc 1.5 m and not exc 3.00 m deep and getting out soft/loose soil & getting out, complete all as directed. |
| 8 | M&L plain cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 9 | M&L plain cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 10 | S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe.290. Gde-E-165 complete all as specified and as directed. complete all as specified and as directed. |
| 11 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 12 | M&L RCC nominal mix using Type B1 1:1.5:3 (20 mm graded aggrgate) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed. |
| 13 | M&L Pre-cast cement concrete block masonry using Type B1 1:2:4 (20 mm graded aggrgate) with solid blocks, exc. 10 cm in width and setting in mortar,1:6 complete complete all as specified and directed. |
| 14 | M&L Pre Cast RCC nominal mix using Type B1 1:1.5:3 (20 mm graded aggrgate cover slab as in drain cover, manhole cover, etc, set in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, banding spirally for hooping columns, hooking end and binding with and including mild steel wire not less than 0.90 mm dia (annealed) complete all as specified and directed . |
| 16 | M&L mild steel TMT bar 5 mm dia and over upto and including 10mm dia in strrups as in including cutting, bending and binding with and including mild steel not less than 0.9 mm dia (annealed) complete all as specified and directed . |
| 17 | M&L Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, flat, rought finished surfaces of concerete complete all as specified and directed. |
| 18 | M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M&L rendering 20mm thick with cement mortar 1:4 on fair faces of brick work in two layers (10mm and 10mm) sperately mixed with and including water proofing compund in top layer as per manufacturers instruction and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L 75mm thick cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 21 | M&L Hardcore of gauge n exc. 63 mm, Broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and directed. |
| 22 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 23 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in floors fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 24 | S&F 2000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) in 4 layer white colour hoisted and fixed in position all as specified including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210gms), complete in all as specified and as directed. |
| 25 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 26 | S&F 15mm bore Bib taps, fancy type, chromimum plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 27 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed. |
| 28 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick Screed bed or bedding layer of cement mortar 1:4, for laying floor finishes, complete all as specified and directed. |
| 29 | M&L Glazed ceramic coloured tiles in vertical surfaces 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, complete all as specified and directed. |
| 30 | M&L Glazed ceramic coloured tiles in vertical surfaces 300x 200x 7 mm thick set and jointed in neat cement slurry & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, complete all as specified and directed. |
| 31 | M&L Sand filling under floors or in foundations including watering and conosoldiation complete all as specified and directed. |
| 32 | M&L Concrete bed to drain pipes of 150mm bore pipe including packing under, and haunching against the sides of pipes after they are laid and tested; in 1:3:6 type C2 (40mm graded aggregate) complete all as specified and directed. |
| 33 | Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 34 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based corrugated steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler including dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering as specified. |
| 35 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler including dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering as specified. |
| 36 | M&L preparation new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of rex odixed zinc chromate primer complete all as specified and directed. |
| 37 | Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out in soft/loose soil and removing debries not exceeding 50 metre and depositing where directed complete all as directed. |
| 38 | M&L 100mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 39 | S&F 110mm bore UPVC (SWR) heavy duty soil waste drain pipeconforming to IS 13592, single socketed, in any length with rubber rings laid in trenches complete all as specified and as directed. |
| 40 | S&F 150mm bore UPVC (SWR) heavy duty soil waste drain pipeconforming to IS 13592, single socketed, in any length with rubber rings laid in trenches complete all as specified and as directed. |
| 41 | S&F 110mm bore UPVC (SWR) bends any radius complete all as specified and as directed. |
| 42 | Cutting into existing manholes for connecting new drains,150mm bore making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required |
| 43 | M&L Heavy duty vitrified coloured tiles 600mmx600mmx16mm thick in floors etc. set and jointed in cementitious tile adhesive and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed. |
| 44 | M & L for Cutting holes in brick walls built, in cement mortar superficial area wxc 150sqcm but not exc 400sqcm as required and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. |
| 45 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, complete all as specified and directed. |
| 46 | S&F framed work as in wind Tie and similar work confirming to Fe.290. Gde-E-165, complete all as specified and directed. |
| 47 | S&F Rolled mild steel as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete confirming to Fe.290. Gde-E-165, complete all as specified and directed. |
| 48 | S&F 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed. |
| 49 | Dismantling structural steel work including dorrs, gates but excluding framed truss etc. Complete all as specified and as directed |
| 50 | Supply and fixing of steel rolling shutters as per Is-6248-1979, made of required size ms laths interlocked together through their entire length and jointed together at the ends by end locks mounted on shafts (50mm dia) heavy duty, thickness of lathe 1.20mm, grade II springs, guide channel 3.15mm thick, bottom plate 3.15mm thick gear oprated shutter with bevel gear box and crank handle, hood cover 1.20mm and 1 coat of red oxide primer including necessary concrete bed blocks with PCC 1:3:6 size wall width x 150mm x 300mm and finishing with plaster 15mm thick in CM 1:4 finished even and smooth Complete all as specified and as directed |
| 51 | S&F ball bearing suitable for rolling shutter Complete all as specified and as directed |
| 52 | S&F safety lever locks with four levers for rolling shutters Complete all as specified and as directed |
| 53 | S&F MS pipe 50 to 125 mm dia as shaft including two coats of aluminum paint over a coat red oxide primer Complete all as specified and as directed |
| 54 | Supply only following parts of steel roling shutters : |
| 55 | Gear Box set general |
| 56 | Guider Channel 3\\" (3.15 mm) |
| 57 | Bottom plate 5\\" (2.25mm) |
| 58 | M&L for PCC 1:2:4 type B1 (using 20mm graded agg) as in copping Complete all as specified and as directed |
| 59 | Planting/Grassing with lawn Grass No.1 quality (Fresh and good quality as approved) area of plantation of grass with sectional rows having distance 7.5cm apart both ways and watering including surface excavation of earth not exc 30cm deep and averaging 15cm deep including cleaning away all grass, vegetation, shurbs, roots of trees and removing rubbish off the permises complete all as directed.Note:- (i) Supply and mixing of manure/Cow dung with excavated earth, surface dressing of the area to a true level and required slope for grass plantation, extra earth required if any shall be deemed to inclusive in the Unit rate Quoted. (ii) Maintance of one year from certified date of completion is deemed to be inslusive in the in the Unit rate Quoted. |
| 60 | Planting of the following tree species 2 to 2.5 years old with proportional girth and of ever green and or shady species including preperation of plant bed, digging holes, mixing with manure/cow dung including watering, manuring and maintance for one years for the followings:- |
| 61 | Jasmine |
| 62 | Bottle Brush |
| 63 | Silver Oak |
| 64 | Royal Palm |
| 65 | Ashoka |
| 66 | Bugenella |
| 67 | Lechi with seed |
| 68 | Lechi without seed |
| 69 | Bettel Nut |
| 70 | Jamun |
| 71 | Marigold |
| 72 | Providing and planting Water lily (Lily Pad) of approved variety, healthy and disease-free, with well- developed rhizomes, planted in suitable aquatic planting baskets/ containers containing approved aquatic planting media, including manure, positioning in water body, initial care, removal of damaged leaves, and maintenance for one year period, complete as directed by the Engineer-in- Charge |
| 73 | M&L preparing surfaces for hedging by taking out wild grass etc and planting golden duranta hedging plants of good quality as approved by engineer-in -charge, putting manure etc as required including maintance for one years complete all as directed. |
| 74 | Provision of bamboo tree guard, height not less than 1.5 meter from GL, spacing of bamboo not less than 150mm center to center (thickness of bamboo splits not less than 10mm) complete all as directed.Note:- (i) Bamboo used shall as approved |
| 75 | Providing and placing 300 mm diameter PVC flower pot with 350mm dia stainless steel decorative outer cover of thickness 0.5 to 0.8mm, approved quality and design, complete with drainage hole at bottom and matching bottom plate/ tray for collection of excess water, including all necessary accessories, handling transportation, loading/ unloading and installation at designated locations as per specifications and instructions of Engineer-in-Charge complete in all respects. |
| 76 | Providing and placing ornamental permanent decoration plam plant of approved variety having overall minimum height of 600mm with minimum 600 mm green foliage cover and dense branching/clustered foliage, suitable for aesthetic landscaping and green cover, complete with good quality garden soil, manure, fertilizers, cocopeat and other required planting media, including planting, dressing, watering, maintenance during establishment period, and all incidental charges, complete in all respects as directed by Engineer-in-Charge. Maintenance of one year from certified date of completion is deemed to be inclusive in the Unit rate quoted. |
| 77 | M&L 50mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in floor finished even and fair without using extra cement complete all as specified and directed. |
| 78 | M&L Heavy duty ( Dura Stone) coloured ceramic tiles 300 x 300 x 12 mm thick in floors set set and jointed and pointed in adhesive compound as per manufacturer instruction with grey cement and pigment over cement screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed. |
| 79 | M&L for RCC in Slabs supported on walls, beams and columns in floors, roofs, landing, baloconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 80 | M&L Black Granite (of any type) tiles 18-20mm thick machine cut, as in in skirting/dado, vertical surfaces, laid bedded and jointed with adhesive compound as per manufacturer instruction and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including including 20 mm thick Screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed. |
| 81 | S&F 150mm bore HDPE Pipes PN 10 laid complete all as specified and directed. |
| 82 | Supply and laying 15mm unplasticised PVC pipes of pressure rating 10kgf/cm2 laid in trenches, complete all as specified and directed. |
| 83 | S&F 15mm bore dia chromium plated Bib taps, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe for brass ferrule and fixed, complete all as specified and directed, |
| 84 | Providing,laying and fixing 15mm nominal diameter heavy-duty flexible PVC garden hose pipe of approved make and quality, suitable for watering in lawns, shrubs, hedges, etc., UV resistant, weatherproof, capable of withstanding normal water pressure, complete with all necessary connectors, handling, transportation, testing and commissioning, complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender