Tender For Repair /Maint /Cleaning Of Stp & Sewage Pumping Station And Connected Items Of Work At Air Force Station Jaisalmer Under Ge (Af) Jaisalmer
Tender Value
14 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
10 days left
EMD
28000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Maint /Cleaning Of Stp & Sewage Pumping Station And Connected Items Of Work At Air Force Station Jaisalmer Under Ge (Af) Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of following Sewage Treatment Plant Chambers by professional agency after De-watering of sewage and cleaning with Jet Pressure Water Pump for dirt, silt and agae, scrapping with steel brushes/ hessin cloths of the chamber walls from inside including floor of the chamber and apply solution of Potassium Permanganate (KMnO4) complete and providing two coats of anti corrosive paint including watering etc and repair to vent pipes including providing wire mesh and clamps complete all as specified and directed by Engineer-in-Charge. Note: If work is not done upto satisfaction level of concerned Engineer-in-Charge,the work will be redone upto the required level without any extra cost. Necessary tools and safety measures for man power to be arranged by contractor.Note : Cleaning shall be done at a regular interval of Six Months.First cleaning considered as to be one Job & after six month period second cleaning consider Second Job.Stilling Chamber of size 1.40 x 1.40 x 1.40 m. |
| 2 | Pumping Station Plant at Central Sewage Treatment Plant. |
| 3 | Grit Chamber of size 3.6M X 1.2M X 1.1 M |
| 4 | Equalization Tank of size 8.30 M (Dia) x 3.50 M |
| 5 | Moving Bed Bio Reactor of size 4.00 M (Dia) x 5.00 M |
| 6 | Tube Settler of size 7.00 M x 6.50 M x 2.70 M |
| 7 | Chlorine Contact Tank of size 7.00 M x 4.50 M x 2.00 M |
| 8 | Sludge Holding Tank of size 8.10 M (Dia) x 2.50 M |
| 9 | Treated Water Tank of size 13.50 (Dia) x 6.00 M |
| 10 | Sewage Pump Stations of dia 2M and depth 10M |
| 11 | Opening and reassembling of Non clog submersible motor (STP motor) after rewinding and replacement of worn out spare parts including taking out the burnt winding wire and rewinding of submersible motor following capacity with new PVC insulated solid copper conductor (wire) superior quality of approved make, gauge/size & number of wire as per existing including insulation material and for suitable RPM including rotor balancing, minor spares, fixing new mechanical seal for avoiding of shorting of motor and replacement of unserviceable spare parts and reassembling the components & testing for function ability including taking old unserviceable motor from treated water tank complete all as specified and directed. Note: The Job include the opening of motor at site for damaging of existing stator winding if found burnt/damaged in front of concerned JE/AGE (E/M) after testing on site before taking to work shop outside MD land. Motors will be given for repairing as per the site condition and need for repair being maintenance work. Submersible motor of capacity 25 HP, 3 phase, 415 volts |
| 12 | Submersible motor of capacity 7.5 HP, 3 phase, 415 volts |
| 13 | Submersible motor of capacity 3.0 HP, 3 phase, 415 volts |
| 14 | Opening and reassembling of STP monoblock /centrifugal pump (motor) after rewinding and replacement of worn out spare parts including taking out the burnt winding wire and rewinding of monoblock/ centrifugal pump (motor) following capacity, Three Phase, 415 volts with new PVC insulated solid copper conductor (wire) superior quality of approved make, size & number of wire as per existing including insulation material, minor spares and replacement of unserviceable spare parts and reassembling the components & testing for function ability, complete, all as specified & directed. Note: (i) The include opening of motor at site for damaging of existing stator winding if found burnt/damaged in front of concerned JE/AGE (E/M) after testing on site before taking to work shop outside MD land and testing of RPM to be done after installation on Ground after rewinding. Motor will be given for repairing as per the site condition and need for repair being maintenance work. (ii) Unit rate (quoted by the tenderer) shall be deemed to included for all minor spares/extras. The decision of Accepting officer regarding minor spares/extras shall be final, conclusive and binding.Monoblock/Centrifugal motor of capacity 40 HP, 3 phase, 415 volts |
| 15 | Monoblock/Centrifugal motor of capacity 12.50 HP, 3 phase, 415 volts |
| 16 | Monoblock/Centrifugal motor of capacity 7.50 HP, 3 phase, 415 volts |
| 17 | Monoblock/Centrifugal motor of capacity 5 HP, 3 phase, 415 Volt, |
| 18 | Monoblock/Centrifugal motor of capacity 1.50/2.0 HP, 3 phase, 415 volts |
| 19 | Deep Groove ball/roller bearing (Double sealed ball bearing) for the following capacity of STP Pump (Primary and secondary) complete all as specified and directed. Make : SKF/NBC/TATA/FAG/UBC.Note: The rates include cost of two nos bearing as per pump design. Both the bearings(as per pump make) to be replaced at the same time.Centrifugal pump/mono block pump set of capacity 40 HP |
| 20 | Centrifugal pump/mono block pump set of capacity 12.5 HP |
| 21 | Centrifugal pump/mono block pump set of capacity 7.5 HP |
| 22 | Centrifugal pump/mono block pump set of capacity 5.0 HP |
| 23 | Centrifugal pump/mono block pump set of capacity 1.5/2.0 HP |
| 24 | Centrifugal/Monoblock STP Pump motor MS coupling capacity 40 HP motor (Beam, Jaw, Gear any type) including taking down old unserviceable complete all as specified and directed. |
| 25 | Centrifugal/Monoblock STP Pump motor MS coupling capacity 12.5 HP motor (Beam, Jaw, Gear any type) including taking down old unserviceable complete all as specified and directed. |
| 26 | Centrifugal/Monoblock STP Pump motor MS coupling capacity 7.5/5.0 HP motor (Beam, Jaw, Gear any type) including taking down old unserviceable complete all as specified and directed. |
| 27 | Centrifugal/Monoblock STP Pump motor MS coupling capacity 1.5/2.0 HP motor (Beam, Jaw, Gear any type) including taking down old unserviceable complete all as specified and directed. Please Enable Macros to View BoQ information |
| 28 | Centrifugal/Monoblock STP Pump motor MS coupling capacity 1.5/2.0 HP motor (Beam, Jaw, Gear any type) including taking down old unserviceable complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender