Tender For Repair To Steel Furniture Including Painting At Roorkee Station Under Ge Roorkee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Aug 2026
17 days left
EMD
99970
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Steel Furniture Including Painting At Roorkee Station Under Ge Roorkee
BOQ
| Sl. No. | Item Description |
| 1 | A) Removal of following existing unserviceable components of various MES FD Drg/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges, denting, placing every part in-tact, as applicable as per drgs.B) Work will be executed where the furniture exist in different User Units of GE Roorkee including BSO Furniture Yard as directed by Engineer-in-Charge. |
| 2 | Desk /Desk steel (FD-1021 1/1 or similar patter)15 mm thick plywood top with 4mm thick teak ply pasted and polished and 18mm mdf board for base and all three side rest as per existing shape and size complete rest all as drg and as directed |
| 3 | Leg 25mm MS Tube with 1.6mm thick |
| 4 | Foot Rest and stiffner 25mm MS Tube |
| 5 | Hard rubber shoes |
| 6 | Charpoy IP Ply Top/ IP Folding (FD/MAP-II/01 or FD-388 R)12 mm thick plywood top Marine grade as per existing shape and size with 8 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed |
| 7 | Long Rail |
| 8 | Hard rubber shoe std quality |
| 9 | Repairs including tinkering/denting, fixing by nut bolts, welding, etc all as shown |
| 10 | Table Office Officer Steel (FD-84/1003)Legs, as per drg |
| 11 | Lock of drawer as per drg |
| 12 | Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown. |
| 13 | Stiffeners as per drg |
| 14 | PVC Shoes std quality all as per drg |
| 15 | Welding the joints of legs / square tube. |
| 16 | Top 18 mm thick MDF board exterior grade (Grade I, Type-II). |
| 17 | Table Office Clerk Steel (FD-84 / 381 FD-1004)Legs, as per drg |
| 18 | Lock of drawer as per drg. |
| 19 | Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown. |
| 20 | Stiffeners. |
| 21 | PVC Shoes std quality. |
| 22 | Welding the joints of legs / square tube. |
| 23 | Top 18 mm thick MDF board exterior grade (Grade I, Type-II). |
| 24 | Almirah Large Steel S & F (FD-67/1031/TP/MAP)Brass/Steel 6 lever locks. |
| 25 | CP Handle SS. |
| 26 | Legs. |
| 27 | Repairs to door including replacement of hinges. |
| 28 | Repair/adjustment to existing shelf including welding. |
| 29 | Shutter/door duly painted of body shade. |
| 30 | Shelf. |
| 31 | Welding wherever required |
| 32 | Almirah Medium/Small Steel (FD-1032/FD-104(m))Brass/Steel 6 lever locks. |
| 33 | CP Handle. |
| 34 | Legs. |
| 35 | Repairs to door including replacement of hinges. |
| 36 | Repair/adjustment to existing shelf including welding. |
| 37 | Shutter/door duly painted of body shade. |
| 38 | Shelf. |
| 39 | Welding wherever required |
| 40 | Table 3x2 with and w/o drawer steel (FD-1008/1007)Welding wherever required as directed by Engr-in-charge |
| 41 | Top 18 mm thick of size 3'x2' made of MDF board exterior grade |
| 42 | Legs. |
| 43 | Repairs to Drawer by replacing old u/s parts with new parts including tinkering/denting, welding, etc all as shown. |
| 44 | Rubber shoe std quality. |
| 45 | Lock of drawer. |
| 46 | Chair Steel Tubular with arms (FD-75(m))Second class Hard wood seat frame with installation of cushion of thickness 50mm and 40 density with rexine (Rate not less than Rs 400/Mtr) cloth in liew of canning duly screwed with wooden frame and applying two coats enameled painting over a coat primer and putty fitting in position all as per drg |
| 47 | Second class Hard wood back frame with installation of cushion of thickness 50mm and 40 density with rexine cloth (Rate not less than Rs 400/Mtr) in liew of canning of size as per drg duly screwed with wooden frame and applying two coats enameled painting over a coat primer and putty fitting in position all as per drg |
| 48 | PVC Arm rest. |
| 49 | Hard rubber shoes |
| 50 | Rubber cap for conduit pipe. |
| 51 | Welding wherever required. |
| 52 | Chair Steel Tubular without S&F (FD-75(m))Second class Hard wood seat frame with installation of cushion of thickness 50mm and 40 density with rexine cloth (Rate not less than Rs 400/Mtr) in liew of canning duly screwed with wooden frame and applying two coats enameled painting over a coat primer and putty fitting in position all as per drg |
| 53 | Second class Hard wood back frame with installation of cushion of thickness 50mm and 40 density with rexine cloth (Rate not less than Rs 400/Mtr) in liew of canning of size as per drg duly screwed with wooden frame and applying two coats enameled painting over a coat primer and putty fitting in position all as per drg |
| 54 | Hard rubber shoes std quality. |
| 55 | Rubber cap for conduit pipe. |
| 56 | Welding wherever required. |
| 57 | Chair Verandah (FD-19, FD-256, FD-359/MAP/11/MAP-II/15)Conduit section any member of MS conduit pipe 16G, 19mm dia as per drg. |
| 58 | Welding joints of leg of 19/20mm MS tube & other joints as per drg. |
| 59 | Hard rubber shoes. |
| 60 | Removing old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern all as specified (colour of cane shall approved by EIC/GE |
| 61 | Removing old broken PVC seat & Back of each verandah and S&F new PVC Seat and back 4mm thick as specified and directed |
| 62 | Locker Steel (FD-1029/257/SKD-562)CP handels as per drg |
| 63 | S/S Hasp & Staple, rest as per drg |
| 64 | Repairs to door/sides including replacement of hinges |
| 65 | Shutter/door duly painted of body shade as per drg. |
| 66 | Legs as per drg |
| 67 | CP Conduit pipe as per drg |
| 68 | Shelf as per drg. |
| 69 | Welding wherever required |
| 70 | Chair Computer/Chair Revolving TP (FD/E6/MAP/01 & TP)S&F new seat made of 12mm thick hot pressed plywood with fabric polyproplene/acrelic (range of fabrics not less than Rs 300/Rm)and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing. |
| 71 | All as above but back complete. |
| 72 | PU arms as per drg |
| 73 | Complete pedestal assy std quality complete all as per drg and directed. |
| 74 | S&F new twin wheel castors of required dia complete all as directed. |
| 75 | S&F new chrome free cylinder tube shall be fixed complete all as per drg and directed. |
| 76 | S&F new Locking lever assembely as shown in drawing complete all as directed. |
| 77 | Chair Writing Map steel/ visitor/Class room chair TP (FD/E6/MAP/12 or TP)S&F new seat made of 12mm thick hot pressed plywood with fabric polyproplene/acrelic (range of fabrics not less than Rs 300/ Rm)and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing. |
| 78 | All as above but back complete. |
| 79 | S&F new PU arms in lieu of old unserviceable handle |
| 80 | S&F new writing flap of PVC by replacing old unserviceable flap wheather pvc or ply wood of training chair |
| 81 | S&F new tie up and back push mechanism including all fitting accessories by replacing old unserviceable mechanism duly fixed with writing flap on one side. |
| 82 | Welding wherever required |
| 83 | CHAIR SCHOOL WITH HAND BOARD STEEL (FD/E6/MAP/05)Combined peice of seat & back frame complete with fitting accessories |
| 84 | Hand board support frame |
| 85 | Hand rest board with fitting accessories |
| 86 | Welding |
| 87 | Bed Hard steel MAP (FD/E6/MAP/08(R))12 mm thick plywood top Marine grade as per existing shape and size with 8 Nos Shunken nut/bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg |
| 88 | Screwing Welding wherever required. |
| 89 | Stiffeners as per drg. |
| 90 | Head rest including complete frame complete shall be of 18 mm thick MDF board exterior grade (Grade I, Type-II). |
| 91 | Hard rubber shoe std quality as per drg |
| 92 | Table Centre Glass Top (FD-375)Replacement of 10 mm toughned Glass Top as per drg |
| 93 | Legs of 40mm dia anodized brass |
| 94 | Welding |
| 95 | Table Bed Side MAP OR ANY TYPE (FD/E6/MAP/15 (R)/ OR TP)Back/sides of table bed side map made of 18 mm thick MDF board exterior grade (Grade I, Type-II). |
| 96 | ScrewingWelding wherever required as directed by Engr-in-charge |
| 97 | Complete Drawer/cabinet made of 18 mm thick pre laminated MDF board Exterior grade (Grade-I, Type-II) with telescopic channel. |
| 98 | 25 mm Sq pipe 18 G including fixing as per drg. |
| 99 | PVC Shoes std quality all as per drg |
| 100 | DOUBLE BUNK CHARPOY (GE/WD/01/FUR /Any type) (GE/WD/01/FUR OR Any type)12 mm thick plywood top MARINE grade as per existing shape and size with 10 Nos shunken nut/bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed |
| 101 | Circular pipe/flat iron as requied |
| 102 | S&F 3mm thick and 25mm dia MS Plate welded to bottom of each leg of double bunk charpoy including grinding of extra material complete all as specified & directed. |
| 103 | S&F new MS clamp for FMN Set at legs of of double bunk charpoy as per drawing |
| 104 | Welding |
| 105 | Couch/Sofa Office 5 Seater steel (FD-282/TP or similar pattern)Replacement of seat cushion single couch 40 density and rexine cloth (Rate not less than Rs 400/Mtr) of best quality. |
| 106 | Replacement of back cushion single couch 40 density and rexine cloth (Rate not less than Rs 400/Mtr) of best quality. |
| 107 | Replacement of 5 seater sofa cushion seat and back including handrest 40 density and rexine cloth (Rate not less than Rs 400/Mtr) of best quality. |
| 108 | Replacement of Hand Rest as per drg. |
| 109 | M&L for running welding (not execeeding 25mm each) of steel items. |
| 110 | Preparation/cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling all cavity with putty, and synthtic enamel painting of two coat for repaired and existing good furniture at furniture yard/Md/OTM buildings. |
| 111 | Chair Auditorium, make RANA Chairs (TP/similar pattern)Seat made of ABS plastic with suitable fixing arrangements. |
| 112 | Back made of ABS plastic with suitable fixing arrangements. |
| 113 | Cushion 40D for seat, best quality. |
| 114 | Cushion 40D for back, best quality. |
| 115 | Tapestry cloth best quality for seat/Back colour of tapestry cloth as approved by GE. |
| 116 | Spring for seat (auto lift function), best quality |
| 117 | Spring for back (push back function), best quality |
| 118 | Arm rest handle best PU material as approved by GE. |
| 119 | Rod (16 mm square Rod) under seat with suitable fixing arrangements for seat movement. |
| 120 | A) M&L for hammertone paint with shade as approved by EIC/GE over a coat of primer through spray machine, both internally & externally for item as applicable and for rest of item shall be painted two coat of synthetic enamel paint with shade as approved by GE/Engr-in-charge over a coat of primer through spray machine, both internally & externally to the following furniture articles, all are of MES pattern viz FD/DB/MAP series or Similar items including removing of dust, dirts, dents etc and removing of existing paint both internally & externally, applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. |
| 121 | Almirah/Cupboard Steel Medium/Small (FD-1032) |
| 122 | Almirah/cupboard Steel Large/almirah 1/2 hx 1/2s (FD-67/351, 1031) |
| 123 | Charpoy IP Hard Top (FD/MAP-II/01) |
| 124 | Chair Steel Tubular with and w/o arms (FD-75(m)) |
| 125 | Chair Verandah (FD-19/256) |
| 126 | Locker bed side Steel (FD-1029/257/127) |
| 127 | Bed Hard steel map (FD/E6/MAP/8(R)) |
| 128 | Table office officer steel (FD-1003) |
| 129 | Table office Clk steel (FD-1004) |
| 130 | Table 3x2 with and w/o drawer (FD-1007/1008) |
| 131 | Table Bed Side MAP or any type (FD/E6/MAP/15 & HFD/TP) |
| 132 | Charpoy IP folding (FD-388 (R)) |
| 133 | Chair writing/chair visitor/chair revolving (FD/E6/MAP/12 or TP) |
| 134 | Shoe Rack steel (FD/E6/MAP/02(R)) |
| 135 | Book case steel (FD-90/1028 (1/1)/69m) |
| 136 | Locker 2 UNIT Steel (FD-127M) |
| 137 | Rack adjustable six tier / 3 tier (FD-1039(1/1)) |
| 138 | Double bunk with hard top (GE/WD/01/FUR OR Any type) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender