Tender For Provn Of Changing Room (30 Men Porter) And Provn Of Guard Room At Kil Rear Dras Under Ge Kargil
Tender Value
46.67 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
18 days left
EMD
93500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Changing Room (30 Men Porter) And Provn Of Guard Room At Kil Rear Dras Under Ge Kargil
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc 15cm deep and getting out in hard/dense soil . |
| 2 | Excavating over areas, n exc 1.5 m deep and getting out and getting out in hard dense soil complete all as specified & directed. |
| 3 | All as per item no 2.00 above but depth exc 1.50m but not exc 3.0 m complete all as specified & directed. |
| 4 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sqm on plan and n exc1.5 m in depth and getting out in hard dense soil complete all as specified & directed. |
| 5 | M&L PCC type D-2 1 :4 : 8 (40mm graded agg) in foundation, filling and mass concrete incl sub base of Bldg. |
| 6 | M&L for M-30 grade cement concrete (design mix) (using 20mm graded stone aggregates) as in foundations, including rafts,footings, foundation beams, plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified & directed. |
| 7 | M&L for M-30 grade cement concrete (design mix) (using 20mm graded stone aggregates) as in Columns, pillars, piers, posts and struts complete all as specified & directed. |
| 8 | M&L for M-30 grade cement concrete (design mix) (using 20mm graded stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed. |
| 9 | Flat rough finished form work to side of concrete foundations, footings,bases of columns, raft and raft beam, sides and soffits(if any) of foundation and plinth beams, and similar works.etc. |
| 10 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick. |
| 11 | M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work complete all as specified. |
| 12 | Flat rough finished form work to side of pillars, posts, struts, piers, columns and stanchions etc. |
| 13 | Flat rough finished form work to sides and soffits of floor or roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc |
| 14 | S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping etc and binding with mild steel rie (annealed) not less than 0.9 mm dia or secjring with clips. |
| 15 | All as per item no 14 above but 5mm dia and over upto and incl 10mm dia in strirups, spaces and binder etc. |
| 16 | M&L for Precast cement concrete Type C1 ,(1:3:6) (using 20mm graded crushed stone agg) block masonary with solid blocks exc 10 cm in width and setting in CM 1:4, complete all as specified and directed by Engr-in charge. |
| 17 | M&L 15 mm thick cement plaster on other than fair faces concrete surface in cement mortar (1:4) finished even and somooth without using extra cement. |
| 18 | M&L 15 mm thick cement plaster on fair faces of concrete surface in cement mortar (1:6) finished even and somooth without using extra cement. |
| 19 | M&L for rendering 15mm thick in cement mortar in 1:4 in two layers with backing coat 10 mm thick and second coat 5 mm thick with WPC on fare face of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid separately under respective item of this schedule. |
| 20 | Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for Plain fillets of second class soft wood, sectional area n. exceeding 3 Sqcm square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed. |
| 22 | M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed. |
| 23 | S & F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed. |
| 24 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work as in wall/ceiling complete, all as specified and directed by Engr-in-Charge. |
| 25 | S&F 9mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work all as specified and directed. |
| 26 | M&L for 2nd class softwood Moulding as in cornices, picture rails and the like n.exc 6 Sqcm complete all as specified and directed. |
| 27 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash. |
| 28 | M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer. |
| 29 | Returning, filling of hard / dense soil incl spreading, levlling, watering and well ramming in each layer including filling in floors upto plinth n.exc 25 cm thick |
| 30 | Earth filling in floors or paving including spreading,levelling and ramming with watering as required in layers n.exc 25cm thick. |
| 31 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. |
| 32 | M&L 75mm thick cement concrete (1:3:6) type C2 as in sub base to floor as specified. |
| 33 | M&L 25 mm thick cement concrete 1:2:4 type B-0 as in floor finished even and rough to receive further floor finishes. |
| 34 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. |
| 35 | S&F Non skid coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over 15mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as directed |
| 36 | S&F glazed ceramic coloured tiles in vertical surface of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15mm thick rendering in cement mortar 1:4 all as specifed and as directed. |
| 37 | S&F Rolled mild steel Gde Fe-290 (Gde Fe 165) as in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. |
| 38 | M&L For Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete. |
| 39 | S&F Rolled mild steel Gde Fe-290(Gde Fe 165) in Plates (plain or chequered) channels,angle sections, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment. |
| 40 | S&F Mild steel rag or lewis bolts screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised length of bolt exc 30 cm long and neck diameter 16 mm complete all as per directed. |
| 41 | M&L for preparation of new untreated steel / iron surfaces of any description over 10cm in width or girth not otherwise described and painting two coat of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified. |
| 42 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 43 | S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 44 | S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class hard wood complete all as specified. |
| 45 | S&F 35 mm thick 2nd class hard wood plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and directed. |
| 46 | S&F 30 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers complete all as specified and directed. |
| 47 | S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified. |
| 48 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as directed. |
| 49 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing complete all as per specification and directed. |
| 50 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 51 | S&F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed. |
| 52 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300mm long. |
| 53 | S&F 150mm long alluminium anodized, barrel tower bolts extruded section & fixed all as specified. |
| 54 | S& F aluminium handles cast type anodised size150mm complete all as specified. |
| 55 | S&F 75 mm butt higes medium weight cold rolled mild steel fixed with screws or welded all as directed. |
| 56 | S& F 100mm long aluminium anodized, barrel tower bolts extruded section & fixed all as specified. |
| 57 | S& F aluminium handles cast type anodised size100mm complete all as specified. |
| 58 | S&F sheet glass 3mm thickness pin headed type and glazing with oil putty n exc 0.5 Sqm in each pane. |
| 59 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. |
| 60 | S&F rotational moulded polythylene water storage tank 1000 Ltrs capacity (cylinderical / vertical with closed top) hoisted and fixed in postion all as specified |
| 61 | S&F Vitreous china wash down water closet pan orissa pattern size 580x440mm (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as specified. |
| 62 | Supply & fixing Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe). |
| 63 | S&F vitreous china urinal partition white of size 310x700mm complete all as specifed and as directed |
| 64 | S&F High grade stainless steel toilet pan of size 58.5x48.2x30.0 cm (excludiig flushing cistern and flush pipe) complete all as specified. |
| 65 | S&F CP urinal spreader complete all as specified |
| 66 | S & F 10 Ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve throat flush type and handle incl brackets complete all as specified. |
| 67 | S &F 600 x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial ply wood and fixed completed wot wall with wood plug and CP plated brass screws and cup washers. |
| 68 | S & F Vitreous china wash basin, white, angle back with pedestal, size 600x480mm excluding taps, waste chain and plug and porcealin stopper but incl brackets |
| 69 | S & F Vitreous China wash basin, white, flat back, size 630x450mm but including brackets etc complete all as spcifed and directed. |
| 70 | S&F Gun metal globe or gate valve with iron wheel head secrewd bolt ends for iron pipe and fixed of 20mm bore dia all as specifed. |
| 71 | S&F Gun metal globe or gate valve with iron wheel head secrewd bolt ends for iron pipe and fixed of 25mm bore dia all as specifed. |
| 72 | S & F Towel rail 600 mm long PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats (Mon wt 170 gms) |
| 73 | S&F 20mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 74 | S&F 25mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 75 | S&F bib tap 15 mm bore chromium plated copper alloy with crutch or butterfly handle screwed donw screwed for iorn pipe or brass ferrule. |
| 76 | S&F 20 mm dia chromium plated fancy type Bib tap with round handle screwed down screwed for iron pipe or brass ferrule complete all as specified |
| 77 | S&F Stop valves/Angle Cock cast copper alloy, screw down high pressure with crutch or butterfly handly for 15mm bore pipe. |
| 78 | S&F 20 mm dia chromium plated fancy type stop valves/angle cock screwed down high pressure, screwed for iron pipe complete all as specified |
| 79 | S&F pillar tap 15mm bore chromium plated screwed down, thigh pressure with or without lettered (hot or cold) with long screwed shkes and fly nuts scrrewed for inor pipe. |
| 80 | S&F pillar tap 20 mm bore fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed and fly screwed for iron pipe complete all as specified. |
| 81 | S & F PVC connection 15mm size with PTMT nuts or length 450mm. |
| 82 | S & F PVC connection 15mm size with PTMT nuts or length 600mm. |
| 83 | S&F for waste coupling of PTMT (half or full threaded) 32mm dia for basin/ urinal incl waste pipe. |
| 84 | S&F 32mm CP waste coupling with waste pipe and grating but suitable for WHB complete all as specified |
| 85 | S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 86 | S&F 110mm PVC (SWR) 'P' trap complete all as specified |
| 87 | S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 88 | S & F 110 mm bore PVC (SWR) bends with oval access door any radius complete all as specified and directed. |
| 89 | S & F 75 mm bore PVC (SWR) bends with oval access door any radius complete all as specified and directed. |
| 90 | S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 91 | S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 92 | S&F 75mm bore PVC (SWR) reducers complete all as specified and directed. |
| 93 | S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 94 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 95 | M&L for hard core of broken bricks for loose filling using 63mm to 100 mm of size. |
| 96 | M&L for broken stone or boulders as in hardcore of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface all as specified. |
| 97 | M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified & directed. |
| 98 | M&L for stone masonry walling of random rubble,uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified & directed. |
| 99 | M&L for Precast cement concrete type C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge. |
| 100 | M&LCement concrete Type BI (1:2:4) 20 mm graded aggregate for coping all as specified and directed. |
| 101 | M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates as in lintels, landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified.. |
| 102 | M&L for RCC (1:1.5:3) using 20mm graded stone aggregate in slabs supported on walls, beams, complete all as specified. |
| 103 | M&L for 150mm bore (DOUBLE WALL CORRUGATED) Pipes (150mm SN8),including fitting laid and jointed complete with collors all as directed and specified by Engr-in-Charge. |
| 104 | M&L Concrete bed to drain pipe in PCC (1:4:8) Type-D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested, for 150 mm bore of pipe (Earth work shall be measured and paid separately) |
| 105 | M&L Concrete bed to drain pipe in PCC (1:4:8) Type-D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested, for 100 mm bore of pipe (Earth work shall be measured and paid separately) |
| 106 | M&L Concrete bed to drain pipe in PCC (1:4:8) Type-D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested, for 75 mm bore of pipe (Earth work shall be measured and paid separately) |
| 107 | Sockage well exc in hard dense soil, foundation in PCC 1:3:6 well of honey combed and each solid in m - 25 concrete , including , intercepting chamber, screen chamber stone work in CM 1:4 RCC cover slab in M- 25 filling with stone boulder complete of 3.00 dia amd 3.00 m deep ( Drg No - CESZ/TD/ -1078/2011, Sheet - 1/1). |
| 108 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch. |
| 109 | All as per item No 108 above but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board. |
| 110 | All as per item No 108 but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. |
| 111 | S & F Switch piano flush type 5 Amps, single pole one way complete all as specified and directed. |
| 112 | S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete all as specified and directed. |
| 113 | S & F Switch socket combination 2 in 1,3 pin, 5 and 15 Amps flush type complete all as specified and directed. |
| 114 | S & F Ceiling rose on PVC Square Block surface bakelite 65x50mm, two to three terminals complete all as specified and directed. |
| 115 | Supply and fixing LED white colour 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 116 | S&f Lamp holder, PVC/Polycarbonate type on square block with back plate suitable for batten fittings complete all as specified and directed. |
| 117 | Supply and fixing LED bulb 09 watt, 230 volts complete all as specified and directed. |
| 118 | S&F LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size. |
| 119 | S & F Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 12 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed. |
| 120 | S & F Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 08 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed. |
| 121 | Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 122 | Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 123 | S & Fix LED Flood light fitting 70 watt 5000 k green/natural white , IP>66 ,grey powder coated die cast aluminium housing , inbuilt energy efficent surge protected electronic driver, with all connected accessories all as specified and directed . |
| 124 | Supply and fixing exhaust fan, steel body, AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers complete with cutting of suitable size of hole on wall with all connected accessories and making surface good after fixing complete all as specified and directed. |
| 125 | Supply and fixing exhaust fan, steel body, AC single phase, 230 V of size 380 mm sweep with blades and frame and louvers complete with cutting of suitable size of hole on wall with all connected accessories and making surface good after fixing. |
| 126 | M&L for Earthing complete with galvanised steel earth plate electrode of size 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including GI iron wire of size 4 mm dia by means of GI bolts, nuts, check nuts and washers, protected by 15mm bore GI light grade ISI marked pipe upto and including test points. Earth plate shall be surrounded by alternate layer 15cm thick of charcoal or coke and common salt all around bottom and top , 20cm bore GI medium grade ISI marked pipe for watering and including funnel,wire mesh,PCC chamber pit made with PCC(1:3:6) type C-1(using 20mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50M, CI pit cover duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No.3 of SSR 2009(Part-I) and all as directed.Note:- (i) Protection pipe and earthing strip upto test point from top of the earth plate and further upto the body of electrical equipment shall be included in the unit rate of this item.(ii) Earth testing arrangement should be done by contractor as per direction of Engr-In-Charge. |
| 127 | M & L LT UG cable 2 core x 16 sq mm 1100 Volts grade XLPE insulated , armored, heavy duty with aluminium conductor laid in trenches or fixed to walls/ poles or passing through pipes with and including,cable gland lugs/ thimbles/ ferrules including connecting, testing and commissioning complete at site all as specified and as directed.Notes:(a) Excavation,RFR and protection pipe etc. Shall be measured and paid separately under relevant item of schedule |
| 128 | Supply and laying double wall corrugated HDPE (DWC) pipe of size DN 40,pressure rating SN-8, in trenches for protection of cable complete all as specified and directed. |
| 129 | Supply and Fix GI tubing light grade 40 mm bore as in cable protection fixed to poles/walls or laid in trenches/under road crossing etc. all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender