Tender For Repair/ Maintenance Of Lt Switch Gear Like Mccb, Mcb, Lt Cable, Lt Panel, And Other Connected Items Of Work Under Age (I) Naya Raipur At Nrms.
Tender Value
9.80 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
18 days left
EMD
19600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raipur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Lt Switch Gear Like Mccb, Mcb, Lt Cable, Lt Panel, And Other Connected Items Of Work Under Age (I) Naya Raipur At Nrms.
BOQ
| Sl. No. | Item Description |
| 1 | Taking out carefully existing unserviceable LT cable from Trenches, pole, panels any size any capacity and removing connection from existing Panel etc complete.all as specified and directed by engr-in-charge |
| 2 | M & L for laying only 6 sqmm, 2 core XLPE insulated, PVC sheathed, armoured, aluminum conductor, 1100 Volt grade underground cable of following size, including dressing, aligning, pulling, laying in trench/cable duct/on wall/in cable tray as applicable, complete with supply and fixing of suitable size aluminum compression cable lugs at both ends, nuts, bolts, washers, ferrules, identification tags, PVC insulation tape, cable clamps/saddles, and all other minor accessories required for proper termination and connection, complete with testing for continuity , in all respects as directed by the Engineer-in-Charge.Note: Excavation, sand cushioning, protective covering, cable route markers and backfilling, if required, shall be measured and paid for separately under the relevant Schedule items. |
| 3 | Ditto same as item no 02 above but for 10 sqmm 2 core |
| 4 | Ditto same as item no 02 above but for 10 sqmm 4 core |
| 5 | Ditto same as item no 02 above but for 16 sqmm 2 core |
| 6 | Ditto same as item no 02 above but for 16 sqmm 4 core |
| 7 | Ditto same as item no 02 above but for 35 sqmm, 4 core |
| 8 | Ditto same as item no 02 above but for 50 sqmm 3.5 core |
| 9 | Ditto same as item no 02 above but for 120 sqmm 3.5 core |
| 10 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out for laying of pipe cables etc,. and getting out complete all as specified and directed |
| 11 | Returing filling in, including spreading levelling, watering and well ramming in layers not exceeding 25cm thick with earth obtained from excavation complete all as specified and as directed. |
| 12 | Removal of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete, all as specified and directed by engg in charge. |
| 13 | Material and labour for dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified in relevant clause of SSR Part I.Note:- Punned thickness shall only be measured and paid. |
| 14 | Supplying and laying un-reinforced precast concrete cable cover, class LV,type 1 with peak, size 250mm x 150mm x 40mm complete , all as specified and directed by engr-in-charge. |
| 15 | Supply and fix light grade galvanised iron tube 80 mm bore with all fittings and fixed to walls / ceiling or laid in floor, pole or laid in trenches and road crossings including sealing ends with hession cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed with walls / poles complete all as specified and as directed. |
| 16 | Supply and fix light grade galvanised iron tube 50 mm bore with all fittings and fixed to walls / ceiling or laid in floor, pole or laid in trenches and road crossings including sealing ends with hession cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed with walls / poles complete all as specified and as directed. |
| 17 | Supply and fix in repairs MCCB, 4 pole, adjustable type, front operated with two suitable position, 630 amps, 50 Hz, 415 volts with rupturing capacity 50 KA. |
| 18 | Supply and fix in repairs MCCB, 4 pole, adjustable type, front operated with two suitable position, 500 amps, 50 Hz, 415 volts with rupturing capacity 35 KA. |
| 19 | Supply and fix in repairs MCCB, 4 pole, adjustable type, front operated with two suitable position, 200 amps, 50 Hz, 415 volts with rupturing capacity 35 KA. |
| 20 | Supply and fix in repairs MCCB, 4 pole, adjustable type, front operated with two suitable position, 100 amps, 50 Hz, 415 volts with rupturing capacity 35 KA. |
| 21 | Supply and fix in repairs MCCB, 4 pole, adjustable type, front operated with two suitable position, 63 amps, 50 Hz, 415 volts with rupturing capacity 35 KA. |
| 22 | Supply and fix in repairs MCCB, 3 pole, fixed type, front operated with two suitable position, 25 to 100amps, 50 Hz, 415 volts with rupturing capacity 16 KA. |
| 23 | M & L for cable glands of size 16 sqmm to 50 sqmm all as specified and directed |
| 24 | M & L for cable glands of size 70 sqmm to 95 sqmm all as specified and directed |
| 25 | M & L for cable glands of size 120 sqmm to 240 sqmm all as specified and directed |
| 26 | M & L for aluminum cable lugs off sizes 16 sqmm to 35 sqmm all as specified and directed by Engr-in-Charge |
| 27 | M & L for aluminum cable lugs off sizes 50 sqmm to 95 sqmm all as specified and directed by Engr-in-Charge |
| 28 | M & L for aluminum cable lugs off sizes 120 sqmm to 185 sqmm all as specified and directed by Engr-in-Charge |
| 29 | M & L for Repair to existing LT Panel comprising disconnecting all incoming and outgoing cables and MCCBs from the panel, cleaning of all bus bars and internal components, carrying out welding repairs to panel doors and frame wherever required to ensure proper alignment and secure closing of the panel, arranging and dressing all cables neatly, refixing all MCCBs, reconnecting all incoming and outgoing cables using suitable size aluminium lugs, nuts, bolts, washers and other accessories as required, complete with tightening of all electrical connections, testing for continuity, phase sequence and proper operation of all phases, and painting the complete panel of outside as front, back and top surface with one coat of approved red oxide primer followed by two coat of synthetic enamel paint of the existing colour., complete in all respects as directed by the Engineer-in-Charge.Note: Excavation work, if required for access to cables, shall be measured and paid separately under the relevant Schedule item. |
| 30 | Supply and fixing of Magnetic Ceramic Steel White Board of size 1500 mm × 900 mm ), comprising a premium-quality porcelain enamel coated ceramic steel magnetic writing surface, scratch-resistant, stain-resistant, anti-glare, and suitable for frequent use with dry-erase markers and magnetic accessories. The board shall be provided with a heavy-duty anodized aluminium frame with reinforced ABS corner caps, rigid moisture-resistant backing for enhanced durability and stability, and a full-length aluminium marker tray. The item shall be supplied complete with wall mounting brackets, screws, rawl plugs, magnetic buttons (minimum 20 Nos.), dry eraser, Blue, Red, Black, Yellow Marker each 02 Nos, all necessary fixing accessories, testing, and commissioning, complete in all respects as directed the Engineer-in-Charge.\\" |
| 31 | Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 63,670.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender