Tender For Repair / Maintenance Of Street/Security Lights, Garden Lights, Pigmi/ Dispersal Light And High Mast Lights Incl Control Cables, Earthings And Junction Boxes Etc At installation Hansa, Nay (G), Raqas, Nasdo, And Nts Under Ge (Nw) Vasco
Tender Value
90 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
24 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Street/Security Lights, Garden Lights, Pigmi/ Dispersal Light And High Mast Lights Incl Control Cables, Earthings And Junction Boxes Etc At installation Hansa, Nay (G), Raqas, Nasdo, And Nts Under Ge (Nw) Vasco
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep in hard/dence soil getting out and levelling of bottom surface to required level complete all as specified and directed |
| 2 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed |
| 3 | Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed |
| 4 | Supply and filling in and speading clear sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed by Engr-in-Charge. Note: Punned thickess i.e 18 cm shall be measured for payment purpose. |
| 5 | Supply and lay un-reinforced precast concrete cable covers, class LV , type- I with peak, size 250 mm x 150mm x 40 mm, complete all as specified and as directed. |
| 6 | Supply and lay Double walled corrugated pipe (DWC ), heavy duty 77/65 mm bore for cable protection as a guard pipe including required accessories including removing old unsv pipe etc. complete as specified and directed. |
| 7 | Supply & Laying jointing, testing and commissioning LT XLPE cable, PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor through pipes, induct, on poles, in trenches etc including taking down complete of following sizes :- |
| 8 | (a) 35 Sqmm, 3.5 core. |
| 9 | (b) 25 Sqmm, 3.5 core. |
| 10 | (c) 16 Sqmm, 4 core. |
| 11 | (d) 10 Sqmm, 4 core. |
| 12 | (e) 50 Sqmm, 3.5 core. |
| 13 | Supply and fix in repair LED bollard light fitting 9 watts, warm white/normall white and Cone/cylindrical shaped integral decorative with polycarbonate diffuser with IP65 protection complete with all accessories and internally prewired and necessary fixing arrangement on PCC platform by providing GI bolts, including removing old UNSV bollard lights complete all as specified and directed .Note : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work |
| 14 | Supply, installation, testing and commissioning of solar powered 2 watts LED bollard light fitting complete with LED lamp, solar panel, battery, controller, bollard housing, PCC foundation and all accessories, including removing old unsv fitting, complete all as specified and as directed.Note : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work |
| 15 | Supply and fix in repair LED post top lantern light fitting 20 watts with minimum efficiency of 130 lm/ watt, and with cast aluminium spigot lid cover and clear cover with IP65 protection complete with all accessories including fixing arrangement on top surface of boundary wall or on pillar by providing Gl pipe of suitable size and length as per site requirement and making good the disturbed portion to match with existing surface including removing old fitting complete all as specified and directedNote : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work |
| 16 | Supply and fix in repair LED post top lantern light fitting 40 watts with minimum efficiency of 130 lm/ watt, and with cast: aluminium spigot lid cover and clear cover with IP65 protection complete with all accessories including fixing arrangement on top surface of boundary wall or on pillar by providing Gl pipe of suitable size and length as per site requirement and making good the disturbed portion to match with existing surface including removing old fitting complete all as specified and directed.Note : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work |
| 17 | Supply and fix in repair LED street light fitting 30/35 watts with minimum efficiency of 130 lm/ watt , made in pressure diecast housing with eppoxy powder coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lenses with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. Note : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work |
| 18 | Supply and fix in repair LED street light fitting 45 watts with minimum efficiency of 130 lm/ watt, made in pressure diecast housing with eppoxy powder coated dark graphite grey colour finish. prismatic polycarbonate cover with individual LED lenses with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. Note : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work |
| 19 | Supply and fix in repair LED street light fitting 60 watts with minimum efficiency of 130 lm/ watt, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 66 complete with all! accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed.Note : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work |
| 20 | Supply and fix in repair LED street light fitting 90 watts,with minimum efficiency of 130 lm/ watt, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lenses with IP 66 complete with all! accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed.Note : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work Please Enable Macros to View BoQ information |
| 21 | Supply and fix in repair LED street light fitting 90 watts,with minimum efficiency of 130 lm/ watt, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lenses with IP 66 complete with all! accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed.Note : Contractor shall submit original manufacturers certificte for replacement warranty of 2 years, stating defective light &fittings shall be replaced without any extra cost during the warranty period of 2 years from the date of completion of the work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender