Tender For special Repair To Bldg No P-10 (Mes Main Office) And Bldg No P-9 At Jalapahar Under Age (I) Darjeeling.
Tender Value
33.62 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
4 days left
EMD
67300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gangtok → sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-10 (Mes Main Office) And Bldg No P-9 At Jalapahar Under Age (I) Darjeeling.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Jul-2026 | BOQ Corrigendum | BOQ | 04-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | M & L rendering 15 mm thick (10mm + 5mm) in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement mixed with intergral water proofing compound 3% of cement or per manufacture instruction Complete all as specified and as directed. (WPC measured and shall be paid separately). |
| 3 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work, or concrete work rendering finished even and smooth (without using extra cement), complete all as specified and directed.. |
| 4 | SSupply only integral water proofing compond approval make/brand., all as specified and directed. |
| 5 | M&L preparation of new plastered surface of wall & applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and as directed. |
| 6 | M&L preparation of old plastered surface of wall & applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and as directed. |
| 7 | M&L for 1mm thick wall care putty on wall complete all as specified and as directed. |
| 8 | M&L for preparation of new plastered or unplastered surface of wall and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather coat paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 10 | Dismanting boarding any decription fixed in any position with nails complete all as specified and as directed. |
| 11 | M&L for hardcore using broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 12 | M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 13 | M & L for 100mm thick PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in flooring & finishing the surfaces rough to receive screed bed complete as specified and directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 15 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick, premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed. |
| 16 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick, premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 etc complete all as specified and directed by Engr-in-charge. |
| 17 | M&L for glazed ceramic colouered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as risers of steps, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering in cement mortar (1:4) finished even and rough, complete all as specified and directed. |
| 18 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 19 | S&F aluminium anodised snap grid frame work of size 605mm X 605mm framework for ceiling with aluminium tee section of size 23.5mm X 26.4mm X 1.4mm thick and aluminium angle section of size 36.5mm X 25mm X 1.4mm thick, for false ceiling incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long incl 4mm thick non asbestos E-board, HSPC fixed to frame complete all as specified and as directed. |
| 20 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling. Complete all as specified and directed. |
| 21 | M&L for brickwork with fly ash bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar(1:6), complete all as specified and directed. |
| 22 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 23 | S&F Pre-painted Galvalume Aluminium Zinc coating GI based semi-corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as directed. |
| 24 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 25 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 26 | M&L for plain cement concrete (1:2:4), type C1 (using 12.5mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 27 | Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed. |
| 28 | aking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame), complete all as specified and directed. |
| 29 | S&F pressed steell door frame 105x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed (PCC filling of holloow section measured and paid seprately) |
| 30 | S&F 35mm thick 2nd class hardwood rail and style Factory made plain frames, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-1), kiln seasoned and chemically treated : supplied and fitted to chowkhats, complete all as specified and directed. |
| 31 | S&F of anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed |
| 32 | M&L for Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 33 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction. |
| 34 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty and wooden beads in square n.exe 0.50sqm in each pane all as specified. |
| 35 | S&F 150 mm size aluminium handle cast type anodised complete all as specified and as directed. |
| 36 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. |
| 37 | M&L preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil complete all as directed. |
| 38 | M&L preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer. |
| 39 | M&L for applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome on newly steel surface including preparation of new previously untreated surfaces of any description, over 10cm width or grith complete all as specified and directed. |
| 40 | S&F 20 mm thick, second class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc complete as specified and directed. |
| 41 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts, coping, filling in pressed steel chowkat or similar work including necessary form work as required, complete all as specified and directed. |
| 42 | S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple (bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 43 | Taking up or down 15mm dia steel tubing and connection , including cleaning , for refixing or removal. |
| 44 | S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors as directed. |
| 45 | Taking up or down 20mm dia steel tubing and connection , including cleaning , for refixing or removal. |
| 46 | S&F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors as directed. |
| 47 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls, complete all as specified and directed. |
| 48 | S&F Bib cock chromium plated cast copper with approved make CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia. complete. |
| 49 | S&F in repairs stop valves/Angle cock, 15mm dia chromium plated but fancy type ,cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 50 | M&L PVC connection 15mm dia with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 51 | S & F Vitrous China wash down water closet pan pedestal pattern white, inclusive of and fixing 'P' or 'S' trap, connecting to union of flushing cistern and drain pipe complete all as specified and directed. |
| 52 | SS&F in repair plastic water closet seat cover, of approved colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 53 | S&F of health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and directed. |
| 54 | S&F of PVC low level flushing cistern 10 litre capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS:2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, complete all as specified and directed. |
| 55 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 56 | S&F of Vitreous china wash basin white, flat back, size 450 X 300 mm excluding tap waste but incl bracket and incl cutting for and pinioning in ends of brackets but exclusive of supply waste pipe, complete all as specified and directed. |
| 57 | M&L waste fittings 32mm dia brass chromium plated for glazed ware basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end as specified. |
| 58 | S&F PVC waste pipe 32mm dia suitable length for WHB/Sink complete all as specified and as directed. |
| 59 | S&F Fancy type Pillar taps 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks, and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 60 | S & F tubular towel rail 20mm dia 'D' Type 60cm between flanges of brass chromium plated all as specified and directed. |
| 61 | S & F of Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed. |
| 62 | S&F of Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 63 | S&F of Vitreous china urinal partition white slab of size 310x700mm terminating about 40 cm above floor line, complete all as specified and directed. |
| 64 | S & F vitreous china shoap tray embedded in the wall complete all as specified and as directed. |
| 65 | Dismantling water tanks and removing to store capacity exc 500 ltr but n exc.1000 ltrcomplete all as specified and as directed. |
| 66 | S & F rotational moulded plyethylene water storage tank consisting of three layer cylinderical vertical with top closed hoisted and fixed in position all as specified and directed capacity 1000 ltr complete all as specified and as directed. |
| 67 | S&F Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed 20mm dia (Min weight 142 gms complete all as specified and as directed. |
| 68 | S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for Iron pipe complete all as specified and as directed. |
| 69 | S&F 20 mm dia Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 70 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 71 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. |
| 72 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 73 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches |
| 74 | S&F 110mm bore PVC (SWR) junction with single (T) equal or unequal fitting and jointing to waste pipecomplete all as specified and as directed. |
| 75 | S&F 75mm bore PVC (SWR) bends with oval access door all as specified and as directed. |
| 76 | S&F 110mm bore PVC (SWR) bends with oval access door all as specified and as directed. |
| 77 | S&F 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof all as specified and as directed by Eng-in-Charge. |
| 78 | S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement all as specified. |
| 79 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender