Tender For Repair To Water Proofing Treatement, Galvalume And Mp Roofing And Other Connected Repair Works At Certain Bldgs Under Age B/R Ii At Dssc Wellington
Tender Value
25 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Water Proofing Treatement, Galvalume And Mp Roofing And Other Connected Repair Works At Certain Bldgs Under Age B/R Ii At Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for as in road padding, Kerb, Coping, parapet wall etc. complete all as specified and as directed. |
| 2 | Demolition of unreinforced cement concrete in ground floors and paving’s not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | Taking down existing water proofing treatment on the roof, cleaning with wire brush etc., and removing debris outside MD land complete all as directed. |
| 4 | Demolition for brickwork or stone/ PCC block masonry laid with cement mortar complete all as specified and as directed. |
| 5 | Taking down cement or cement lime plaster of any description on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed. |
| 6 | Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal complete all as specified and as directed. |
| 7 | Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal complete all as specified and as directed. |
| 8 | Taking down steel tubing and connections of 25 mm bore including cleaning for refixing or removal complete all as specified and as directed. |
| 9 | Dismantling Plain or corrugated/ steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, Fascia etc. complete all as directed. |
| 10 | M&L for plain cement concrete type B-0, 1:2:4 using 12.5mm graded crushed stone aggregate as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, hold fast blocks, roof padding and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 11 | M&L for 20mm thick screed bed or bedding layer in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturer's instructions on fair faces of concrete surfaces like roof slab, sunken floor etc. complete all as specified and as directed.Note: Liquid water proofing compound shall be measured and paid separately. |
| 12 | M&L for laying 3mm thick APP modified water proofing membrane weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyster matt black finished weighing not less than 100 gms/Sqm having softening point not less than 140 degree Celsius longitudinal tensile strength not less than 300 N/Sqm, side lap & end lap 15cm laid over a coat of bitumen primer @ 0.20 Kg/Sqm and the top finished with aluminum paint @ 0.10 Ltr/Sqm all as per manufactures instruction and as directed by Engr-in-charge. Note: The work shall be carried out by authorised applicators of manufactures. |
| 13 | M&L for laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed. |
| 14 | M&L for cleaning the surface to remove all dust, dirt etc. including priming the surface with one coat of Smart care Bituminous primer of make -Asian Paints/ equivalent to enhance the bonding properties. Providing and laying of protective Geotextile fabric 45GSM with proper overlaps. Supplying and applying two coat of single component, elastomeric, pitch modified PU coating Smart care Flexi seal PU or approved equivalent with minimum elongation of 300% and tensile strength of 2 N/mm2 as per ASTM D412 and Shore A Hardness of 90 as per ASTM D 2240. The PU Coating shall have crack bridging ability of 2mm. The system consists of applying the water proofing treatment @ 1.2 Kg/ Sqm and shall have crack bridging ability of 2mm etc. complete as per manufacturer's instruction and as directed by Engr-in-Charge. Note: The treatment should be carried out by the authorised applicator of the company. |
| 15 | M&L for heavy duty vitrified unpolished porcelain floor tiles of size 300mm x 300mm and 10mm thick of make Neo Deccan Natural of Somany or Endura of Johnson or equivalent of other specified makes suitable for heavy vehicle movement, laid in floors/ skirting of parapet, etc. of pattern as approved, pointed in white or coloured cement to match laid over 15mm thick screed bed in cement mortar 1:6 complete all as specified set and jointed with Ezy Grout with spacers of make Somany to match complete all as specified and as directed. |
| 16 | M&L for rendering 10mm thick cement plaster in cement mortar 1:6 on block masonry or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 17 | M&L for rendering 15mm thick cement plaster in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers' instructions on PCC block masonry or concrete surfaces of any description finished even and fair without using extra cement complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately. |
| 18 | Excavation in post holes (or similar holes) each not exceeding 0.50 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface in soft /loose soil complete all as specified and as directed. |
| 19 | M&L for plain cement concrete type C2, 1:3:6 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 20 | M&L for precast cement concrete type C1, 1:3:6 using 20 mm graded crushed stone aggregate block masonry with solid blocks exceeding 10cm width and setting in mortar 1:6 complete all as specified and as directed. |
| 21 | M&L for precast cement concrete type C1, 1:3:6 using 20mm graded crushed stone aggregate solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 in walls ,partition, platform support, etc. complete all as specified and as directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for steel members of Fence, gate, etc. complete all as directed. |
| 23 | M&L for mild steel work as in tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc. sections) including distance pieces, cleats etc. confirming to quality Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed. |
| 24 | M&L for mild steel framed work such as grills, gratings, flat iron support for barge board, fascia, water tank staging ladders; framed balusters; walk ways; railings; and similar work conforming to quality Fe.290.Gde-E-165 complete all as specified and as directed. |
| 25 | S&F welded steel wire fabric weight per square metre not exceeding 4 kg fixed to wood or steel members complete all as specified and as directed. |
| 26 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, crimp curved where necessary fixed with self-tapping screws complete all as specified and as directed. |
| 27 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Barge board, et.c fixed with self-tapping screws complete all as specified and as directed. |
| 28 | M&L for applying two coat of synthetic enamel paint on steel surface over a coat of red oxide primer including preparation of new steel surface complete all as specified and as directed. |
| 29 | M&L cement concrete type C1 1:3:6 (20mm graded agg) 75 mm thick as in plinth protection/ paving’s finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed. |
| 30 | M&L for Chequered cement concrete coloured tiles of size 300mm x 300mm and 25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment with and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 31 | M&L for applying two coats of oil bound distemper over a coat of chalk white primer on walls including complete removal of existing treatment by scrapping, washing, rubbing down and stopping of distempered surfaces complete all as specified and as directed. |
| 32 | M&L for applying two coats of exterior emulsion anti-fungal weather proof paint APEX ULTIMA of Asian Paints or WEATHER COAT SMOOTH of Berger Paints on walls over a coat of exterior wall primer including complete removal of existing treatment on external walls (Plastered or RRM surface) by wire brushing, crack filling & Bio-wash to fight microbial growth complete all as per manufacturer instructions, as specified and as directed. |
| 33 | M&L for applying two coats of oil bound distemper over a coat of primer on ceiling by approved applicator of the manufacturer of the paint including preparation of new surfaces complete all as specified and as directed. |
| 34 | M&L for applying two coats of exterior emulsion anti-fungal weather proof paint APEX ULTIMA of Asian Paints or WEATHER COAT SMOOTH of Berger Paints on walls over a coat of exterior wall primer including preparation of new plastered surfaces complete all as per manufacturer instructions, as specified and as directed. |
| 35 | S&F plain, black, mild steel sheeting, 0.63mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and as directed. |
| 36 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.. |
| 37 | Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed. |
| 38 | M&L for cutting chases, pinning in, making good to facings of stone concrete block or slab walls where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 39 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 40 | S&F in repair 25mm bore, Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, weight 455 gms complete all as specified and as directed. |
| 41 | S&F in repair 25mm bore, gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 42 | S&F in repair 20mm bore, gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 43 | Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and as directed. |
| 44 | All as per serial item No 43.00 here in before but water tank of capacity exceeding 500 litres & not exceeding 1000 litres complete all as specified and as directed. |
| 45 | S&F 1000 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed including dismantling old un serviceable tank. Make: Sintex/Polycon/Vectus |
| 46 | S&F 500 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed including dismantling old un serviceable tank. Make: Sintex/Polycon/Vectus |
| 47 | Demolition of old unserviceable overhead RCC water storage tank of capacity exceeding 500 litres but not exceeding1000 litres on roof slab including necessary cutting, drilling and making good the disturbed surface of roof area with appropriate concrete mix complete all as directed. Note: The coated rate shall be inclusive of necessary labour, tools, scaffolding up to double storey and including removing debris up to 5KM from the Def. land. |
| 48 | Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as directed. |
| 49 | Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work such as rafter, beam, etc. complete all as directed. |
| 50 | Dismantling wooden battens for tiles, shingles etc., of any size including tilting fillets with spacing exceeding 15 cm complete all as directed. |
| 51 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, barge board etc. any thickness, including cover fillets, fixed in any position with nails complete all as directed. |
| 52 | Supply and fixing 0.63mm thick galvanised, mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed. |
| 53 | S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed. |
| 54 | M&L for second class hardwood clean sawn battern for MP/tiles exceeding 5 Sqcm and not exceeding 15 sqcm in sectional area at 30 cm centres complete all as specified and as directed. |
| 55 | S&F second class hard wood scantling as in rafters, purlins, trusses etc. clean sawn complete all as specified and as directed. |
| 56 | M&L for roof tile, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed. |
| 57 | Fixing only for roof tile, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed. |
| 58 | M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed. |
| 59 | M&L for second class hard wood decorative weather boarding, wrought, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed to wooden frame work complete all as specified and as directed. |
| 60 | M&L for providing Gypsum board false ceiling using 12mm thick Gypsum board panels of size as approved by GE, fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing Gypsum board using 'T' and angle sections made out of 0.5mm thick PGI sheet, grade of zinc coating 220, bent to shape required as in main member, secondary member, perimeter angle section including provn of G I channel suspender fixed to roof members at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasteners clips as per manufacturer's instructions with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling including applying two coat of oil bound distemper over a coat of appropriate primer and applying 1.5mm thick putty and including taking down and refixing of electrical fittings if any etc., complete all as specified and as directed. |
| 61 | S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exceeding 60% of PVC content including necessary H-joints, internal/ external corner trim, corner cover, F/J edge trims where required fixed with hidden screws to steel/ wooden frame work complete all as specified and as directed. |
| 62 | M&L for applying two coat of antifungal paint weather coating including preparation and cleaning of old Mangalore pattern tile/ any pattern of tile surfaces complete all as specified and as directed. |
| 63 | Dismantling steel rolling shutter of any description, thick and any size from the Steel/RCC/and any frame work including iron mongeries from any opening complete all as directed. |
| 64 | S&F in repair steel rolling shutters, 1.12mm thick(19mm gauge) without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed. |
| 65 | S&F mild steel profile sheet 1.12mm thick (19 gauge) for rolling shutter including necessary cutting, drilling, and fabrication for replacing damaged profile sheet of existing rolling shutter including taking down old unserviceable damaged profile sheet complete all as specified and as directed. |
| 66 | S&F mild steel profile sheet (Plain or corrugated) 1.12mm thick (19 gauge) with locking arrangement, 200mm to 300mm wide for rolling shutter including necessary cutting, drilling, and fabrication for replacing damaged profile sheet of existing rolling shutter including taking down old unserviceable damaged profile sheet complete all as specified and as directed. |
| 67 | S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 68 | M&L for applying two coat of synthetic enamel paint on old steel surface including preparation of the surface complete all as specified and as directed. |
| 69 | Supply only liquid water proofing compound of approved make complete all as specified and as directed. |
| 70 | Taking down AC pipe/ PVC (SWR) pipe of any description and any dia complete all as directed. |
| 71 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 72 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 73 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 74 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 75 | S&F 75 mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal complete all as specified and as directed. |
| 76 | S&F 110 mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender