Tender For Term Contract For Repairs To Hard Standing, Brick, Paving , Round Abouts, Traffic Islands, Park And Like In All Eight Wards, Delhi Cantonment
Tender Value
3 Crore
Estimated cost
Bid Submission
04 Aug 2026
3 days left
EMD
3.75 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Term Contract For Repairs To Hard Standing, Brick, Paving , Round Abouts, Traffic Islands, Park And Like In All Eight Wards, Delhi Cantonment
BOQ
| Sl. No. | Item Description |
| 1 | Reinforced Cement Concrete Bench without Arms : Supplying and fixing Reinforced cement concrete chair benches with back rest without arms and having two logo of Delhi Cantonment Board as also letter 'DCB' engraved suitably on the benches at locations on concrete benches as specified/ directed by Engineer-in-Charge with indicated colour scheme, with total 6 planks, 3 planks for seating & 3 planks on backrest with 2 Nos L-Shape base support in grey cement colour. The detailed specification shall be as follows: MaterialConcrete mix design: M-30 Grade Concrete mix in accordance with IS:10269/latest in gray cement by using vibro – compaction technique and with reinforcement.Reinforcement steel : TMT reinforcement bars conforming to IS:1786/latest of dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used as stirrups as per drawing and specification given in technical bid (Specification). Stirrups details: 10 nos – 4 mm dia bar @ 150 mm C/CMain reinforcement bar: 4 nos – 10 mm dia barAdequate clean concrete cover: 15mm minimumMaterial for connecting seating plank with leg: 12 mm dia x 65 mm long galvanized steel counter sunk bolts confirming to IS: 1367 / latest with EVA washerMaterial for connecting back rest plank with leg: Half threaded carriage bolts and nuts of size 165 mm length x 8mm dia with EVA and steel washersRCC planks: Using M-30 grade gray cement mixed with 3% red pigmentDimensionSeat / plank length ± 3 mm: 1500 mm (all red coloured)Seat height ± 3 mm: 450 mmSeat width ± 3 mm: 440 mmTotal bench height (including backrest ± 3mm: 1000 mmSize of wider plank ± 3 mm: 1500 mm x 200 mm x 50 mmSize of smaller plank ± 3 mm: 1500 mm x 100 mm x 50 mmPlank hole dia ± 3 mm: 14 mmConnecting holes from each end ± 3 mm: 200 mmLeg width ± 3 mm: 140 mmDistance between both legs ± 3 mm: 340 mmPaint & FinishPlank painting: Acrylic based paint conforming to IS: 15489 / latest of colour as per buyer’s choiceBench finishing: As per approved sampleFinish of exposed surface: Uniformly smooth texture with no bug holes and smooth mold seamsHole finish: Hole visible at the back side of bench sealed with cement mortar APPROVED MAKES : KK, Kreative Concrete Company or equivalent as approved by the Engineer-in-charge. |
| 2 | Reinforced Cement Concrete Bench with Arms : Supplying and fixing Reinforced cement concrete chair benches with back rest with two arms, (one on each side) having two logo of Delhi Cantonment Board as also letter 'DCB' engraved suitably on the benches at locations on concrete benches as specified/ directed by Engineer-in-Charge with indicated colour scheme, with total 6 planks, 3 planks for seating & 3 planks on backrest with 2 Nos L-Shape base support in grey cement colour. The detailed specification shall be as follows: MaterialConcrete mix design: M-30 Grade Concrete mix in accordance with IS:10269/latest in gray cement by using vibro – compaction technique and with reinforcement.Reinforcement steel : TMT reinforcement bars conforming to IS:1786/latest of dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used as stirrups as per drawing and specification given in technical bid (Specification).Stirrups details: 10 nos – 4 mm dia bar @ 150 mm C/CMain reinforcement bar: 4 nos – 10 mm dia barAdequate clean concrete cover: 15mm minimumMaterial for connecting seating plank with leg: 12 mm dia x 65 mm long galvanized steel counter sunk bolts confirming to IS: 1367 / latest with EVA washerMaterial for connecting back rest plank with leg: Half threaded carriage bolts and nuts of size 165 mm length x 8mm dia with EVA and steel washersRCC planks: Using M-30 grade gray cement mixed with 3% red pigmentDimensionSeat / plank length ± 3 mm: 1500 mm (all red coloured)Seat height ± 3 mm: 450 mmSeat width ± 3 mm: 440 mmTotal bench height (including backrest ± 3mm: 890 mm to 1000 mmSize of wider plank ± 3 mm: 1500 mm x 200 mm x 50 mmSize of smaller plank ± 3 mm: 1500 mm x 100 mm x 50 mmPlank hole dia ± 3 mm: 14 mmConnecting holes from each end ± 3 mm: 200 mmLeg width ± 3 mm: 140 mmDistance between both legs ± 3 mm: 340 mmPaint & FinishPlank painting: Acrylic based paint conforming to IS: 15489 / latest of colour as per buyer’s choiceBench finishing: As per approved sampleFinish of exposed surface: Uniformly smooth texture with no bug holes and smooth mold seamsHole finish: Hole visible at the back side of bench sealed with cement mortar APPROVED MAKES : KK, Kreative Concrete Company or equivalent as approved by the Engineer-in-charge. |
| 3 | Supplying & laying Instant patch pothole premixwith fine/ standard grading (Ready Mix of first quality) for filling of potholes, utility cuts, over lays, edge repairs & small carpeting jobs filled in pots & campacted as directed. |
| 4 | 2.0 Please Enable Macros to View BoQ information |
| 5 | 2.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender