Tender For Repair/Renovation And Other Allied Work At Ghss Surinsar Zone Gandhi Nagar Distt Jammu.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation And Other Allied Work At Ghss Surinsar Zone Gandhi Nagar Distt Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 2 | Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal ofrubbish to the dumping ground within 50 metres lead. |
| 4 | 15mm thick Cement plaster in 1:6 (1 cement : 6 fine sand), . |
| 5 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means) |
| 6 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area of 3 sq. metres and below |
| 7 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness,including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.Spressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile B Fixing with adjustable lugs with split end tail to each jamb |
| 8 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding |
| 9 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm |
| 10 | Providing and fixing on wall face unplasticised rigid pVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 110 mm diameter . |
| 11 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Bend 110mm. |
| 12 | Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. New Work |
| 13 | Providing and fixing glazed shutters for doors,windows and clerestory windows using 10 Kg/sqm (4mm thick) float glass pains including ISI marked M.S. pressed but hinges bright fineshed of required size with necessary screws. 30 mm thick 2nd class kail wood. |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35 mm Thick Second class deodar wood |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density |
| 16 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Kiln seasoned & chemically treated hallock wood 50x12mm |
| 17 | Demolishing RCC work manually/ mechanical means including stacking of steel bars and disposal of unserviceable material within 50m lead. |
| 18 | Providing and laying in position cement concrete of specofied grade of reinforced cement concrete, excluding the cost of centering and shuttering, M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates. |
| 19 | Centring and Shuttering including strutting, propping etc and removal of foRmt work for :- |
| 20 | Foundations, footings, bases of columns etc. for mass concrete. |
| 21 | Suspended floors, roofs, landings, balconies and access platforms. |
| 22 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 23 | Reinforcement of R.C.C work in slab, beams, lintel band, sunshades including cutting, bending,placing in position and binding and complete. |
| 24 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10mm |
| 25 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10mm |
| 26 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm. |
| 27 | Providing and fixing aluminium door handles ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 125mm |
| 28 | Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper |
| 29 | Providing and fixing aluminium door handles ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100mm |
| 30 | Demolishing brick work manually or by mechanical means including stacking of servicable material and disposal of unservicable within 50m lead in cement mortar |
| 31 | Surface dressing of ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish ,lead up to 50 cm and lift upto 1.5 m in-ALL kind of soil |
| 32 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:within a lead of 50 metres |
| 33 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 34 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 35 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-30 GRADE made by block making machine with stronge vibratory compacting and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of fine sand,filling the joints with coarse sand etc.all complete as per direction of engineer-in-charge |
| 36 | Providing and fixing 1st quality ceramic glazed floor/wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 37 | Providing and laying damp-proof Course40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 38 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 39 | P/F OF UPVC TILED ROOF SHEET |
| 40 | Engagment OF PANTER FOR WRITING NAME OF SCHOOL |
| 41 | Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. |
| 42 | Sand lead up to 15.00 Kms. |
| 43 | Bajri lead up to 15.00 Kms |
| 44 | Bricks lead up to 25.00 Kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender