Tender For Rev Ing Of 0.40 Mgd Rapid Sand Filtration Plant At Watlab W.S.Scheme Zaingeer Under District Capex Budget 2026-2027.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
17 days left
EMD
30000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rev Ing Of 0.40 Mgd Rapid Sand Filtration Plant At Watlab W.S.Scheme Zaingeer Under District Capex Budget 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.). With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 2 | Providing, fixing & commissioning of LED flood Lights of 20 watts with stand including all accessories required at site complete job inclusive all carriages. |
| 3 | Providing and fixing PPR ELbow 40mm for bleaching tank OF APPROVED MAKE. |
| 4 | Providing fixing of polycarbonate roofing sheet of approved make as per engineer incharge. |
| 5 | Over hauling stablizers installed at site. The job includes pouring/filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing successful commissioning complete job. 50 KV to 63 KV |
| 6 | Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 8 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 9 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work |
| 10 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including skirting in vertical & pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume, Red Brown (as directed by the engineer incharge) |
| 11 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 12 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 13 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 : 6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with; cement mortar 1 : 6 (1 cement : 6 coarse sand) incld. available stones to be used incld. painting. |
| 14 | Providing and fixing imported PVC panelling (8 to 10mm thick) of approved make pattern including the base work of GI channels with necessary screws and cornice at the edge with all carriages all complete as per the directions of incharge Engineer at site. |
| 15 | Providing and installation/fixing of 1.0 KVA invertor with battery 200 MAh along with solar panel of approved Brand and make incld. Cables & with all necessary accessories of approved quality as per directions of incharge Engineer at site including all sorts of Carriage. |
| 16 | Providing and fixing of Electrical points (heating and lighting) incld. Cost of wire switches, necessary MCB's switch boards, ceiling roses reputed make ISI mark screws, casing/conduit materials of all sorts of carriage and labour charges required for the job. |
| 17 | Lightening points |
| 18 | Heating points |
| 19 | Providing and fixing of 5-10 HP, starter of ISI marked standard make, the job includes dismantling of damaged/non functional starter and fixing of new one incld. all sorts of carraiges |
| 20 | Supply and filling of filter media from approved source - sand (coarse filter sand-in filter beds including all carriages complete job) |
| 21 | Cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone agg. 40mm nominal size) laid to required slope and chamber in panels as required including consolidation finishing and tamping complete |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 23 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 24 | Steel reinforcement for RCC work including straightening cutting, bending, placing inposition and binding all carriage all complete upto plinth level . Thermo Mechanically Treated bars of grade fe-500D or more Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender