Tender For Repair To Boundary Wall, Fencing, Gates, Drain, Paved Area Under Ge (West) Jrc
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
7 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Boundary Wall, Fencing, Gates, Drain, Paved Area Under Ge (West) Jrc
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc, but excluding ashlar facings complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 3 | Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and as directed. |
| 4 | M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks complete all as specified and directed.. |
| 5 | M&L for brick work in half brick thick walls built in cement mortar (1:4) using sub class ‘B’ old size bricks, straight or curved on plan to any radius complete all as specified and directed. |
| 6 | M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed. |
| 7 | M&L for Plain Cement Concrete Type B-0 1:2:4 using 12.5 mm graded aggregate as in coping, benching etc including weathering slightly rounded or chamfered angles and throuting, including necessary form work etc complete all as specified and directed. |
| 8 | Taking down cement or cement lime plaster any description on brick walls etc including racking out joints hacking for keys scrubbing down with water complete all as specified and directed. |
| 9 | M&L rendering 15 mm thick in cement mortar 1:4 on brick work including finishing the surface fair and even without using extra cement. |
| 10 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 11 | Material and labour for cement concrete foundation 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete and under floor as sub base etc, complete all as specified and directed. |
| 12 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in channels/benching of manhole, drain, laid to shape and slope, coping, weathering, slightly rounded or chamfered angle and throating and surfaces finished even and smooth using extra cement, complete including all form work etc all as specified and directed. |
| 13 | M&L for reinforced concrete pipe 300mm bore pipe class NP3 laid, tested and jointed with collars as per SSR part I clause No 18.74.4 complete all as specified and directed. |
| 14 | M&L for concrete bed for 300mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under and completely surrounding the pipes with concrete after they are laid and tested complete all as specified and directed. |
| 15 | M&L for preparation of new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat complete all as specified and directed. |
| 16 | M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 17 | M&L for two coat of exterior emulsion paint @ 1.5 kgs /10 sqm diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10sqm diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between both the coats of paint complete all as specified and as directed. |
| 18 | S&F 35 mm thick Precast cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) designer Jafri Wall Jallie as per sample, area of each not exc 0.50 Sqm fixed on wall in cement mortar 1:4 including two coats of cement base paint, fixed in repairs complete all as specified and directed. |
| 19 | S&F Precast reinforced cement concrete 1:2:4, type B-1 (Using 20mm graded stone aggregate )designer pillars of size 100mm X 100mm and 900mm long including all mouldings but excluding frame set in cement mortar (1:4) etc, including two coats of cement base paint, fixed in repairs complete all as specified and directed. |
| 20 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 21 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 22 | S&F framed work such as grills, gratings, for doors or gates of angle etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; ramework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 23 | Supply and fixing 2mm thick fiber glass reinforced translucent plain sheeting fixed with bolts coach screws and washers with steel framed gate, walls and fencing etc complete all as specified and directed. |
| 24 | M&L GRC (Glass Reinforced Concrete) material specifications define the properties and components of this lightweight, durable building material. Key specifications include: cement, aggregate, alkali-resistant glass fiber, water, and potentially chemical admixtures. Typical strength properties vary between spray and premix methods, with examples including impact strength, elastic modulus, and strain to failure.Key Properties and Components:Cement: Jkcement Whitemax usedAggregate: ANCAL CARB-333.Glass Fiber: European Owens Corning Fiber Glass.Water: Properly measured water content is essential for the mix.Admixtures: Dr Fixit 101 LW+ added to enhance the material's properties.Plasticiser: Alpha ChemieTypical Strength Properties (Sprayed vs. Premix):Impact Strength: Spray GRC: 10-25 Kj/m2, Premix GRC: 10-15 Kj/m2.Elastic Modulus: Spray GRC: 10-20 GPa, Premix GRC: 10-10 GPa.Strain to Failure: Spray GRC: 0.6-1.2%, Premix GRC: 0.1-0.2%.Dry Density: Spray GRC: 1.9-2.1 t/m3, Premix GRC: 1.8-2.0 t/m3.Other Properties:Thickness: Typically, GRC cladding panels range from 10 mm to 15 mm.Weight: GRC is lightweight, with a typical bulk density of 180Water Absorption: Can range from 8-13%.Apparent Porosity: Can range from 16-21%.Manufacturing Processes:Sprayed GRC: GRC is sprayed and built up in thin layers.Premix GRC: Materials are mixed in a slurry and then poured into molds. |
| 25 | Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 26 | M&L precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for drain well etc set in cement mortar 1:6 including necessary form work complete all as specified and directed. |
| 27 | M&L mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less that 0.9mm dia or securing with clips all as directed (Top and bottom of chain link fencing) complete all as specified and directed. |
| 28 | M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 29 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves , landing and similar work not exceeding 200 mm thick (horzontal or sloping) and to edges of concrete complete all as specified and directed. |
| 30 | S&F TMT steel bars 10 mm dia and above cut to length bent to shape, required including cranking benchings spirally hooping for colums hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia complete all as specified and directed. |
| 31 | Mild steel TMT bars 5mm dia over and upto 10mm as in stirrups for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete. |
| 32 | 20mm thick Granite (of any type) tiles machine cut, as wall cladding laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and dismantling of old existing stones etc complete all as specified. |
| 33 | Dismantling fencing post or struts(RCC) any section including taking out embedded portion and making good the distrubed ground on (embaded in concrete). |
| 34 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25 cm watering and removing surplus soil to distance n. exc 50m and making good surfaces in soft/loose soil |
| 35 | M&L for cement concrete type C2 (1:3:6) in foundations, filling and mass concrete using 40mm graded stone aggregates complete all as specified and directed. |
| 36 | Supply & Fixing iron angle post and struts in fencing including cutting top to shape as direct drilling holes notching for wire etc, flat iron fillets (for screwing wire mesh etc) incl all necessary drilling bolting/bolts and nuts or reveting etc and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. |
| 37 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exceeding 5 cm but not exceeding 10 cm long, dia of shank 11 to 15 mm, complete all as specified and directed. |
| 38 | S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm barbs at 75 mm spacing and straining and fixing to posts of any type including securing or tying at crossing with and provision of GI wire staples or steel pins etc complete all as specified and directed. |
| 39 | Dismantling fencing wire of any description and type complete all as specified and directed. |
| 40 | Supply only chain link MS galvanised fencing any size and any type complete all as specified and directed. |
| 41 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 42 | Supply and fixing mild steel flat iron of size 40 x 6 mm securing chain link fence including cutting, drilling holes, bolting etc conforming to Fe-290 Gde-E-165 fixed horizontal or vertical complete all as specified and directed. |
| 43 | S&F MS round bars 10 mm dia and over cut ot length bent to shape including cranking bending etc complete all as specified and directed. |
| 44 | M&L concertina coil of 600mm dia on vertical double horn fencing complete all as specified and directed. |
| 45 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of new steel surfaces complete all as specified and directed. |
| 46 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/ lose soil complete all as specified and directed. |
| 47 | Removal of surplus, soil, not exceeding 50m and depositing where directed at a level not exceeding 1.5cm above the starting point complete all as specified and directed. |
| 48 | M&L broken stone or boulders as in hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered, rammed to a true surface etc complete all as specified and directed. |
| 49 | M&L for 25mm thick sand coushening under paver block complete all as specified and directed. |
| 50 | M&L machine pressed precast coloured with pigment concrete interlocking paver blocks any shape and size confirming of IS 15658: 2006 of 60mm thick, M-35 laid and jointed with grey cement and pigment complete all as specified and directed. |
| 51 | M & L for Plain Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in kerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work. |
| 52 | M & L chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender