Tender For Repair To Brick Work, Wall Plastering, Benching, Drainage And Other Connected B/R Works Around Runway And Dispersal Area Under Age (I) Cif (K)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
19 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Brick Work, Wall Plastering, Benching, Drainage And Other Connected B/R Works Around Runway And Dispersal Area Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge. |
| 3 | M&L Stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | All as per item No 03 above but except stone. |
| 5 | Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge. |
| 6 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge. |
| 7 | Rendering 15mm thick on stone masonary surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge. |
| 8 | M&L for plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in coping, weathering slighting rounded or chamfered angles, benching and throating, and use of form work (straight or curved), complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Dismantiling of wrought iron or mild steel work of any description not otherwise provided for complete all as spd and directed. |
| 10 | Framed work such as grills, grating and intricated design including MS angle,MS channel,flat iron, rounded bars,MS plate etc with ends of bars shouldered and or riveted or forget in to spikes incl welding as directed and fixed with screws, bolt etc incl dismantling of existing gate/grill conforming to Fe 290,Gde E-165 complete all as specified as directed by the Engineer-in-Charge. |
| 11 | Preparation of newly untreated steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate,complete all as specified and as directed. |
| 12 | Demolition and breaking up of drain pipes 300mm bore (Salt glazed ware/AC pipe/reinforced concrete pipe/PVC pipe ) set in cement mortar including concrete bed & haunching (if required) and removing away complete from site, complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for 300 mm bore reinforcement concrete pipe, Class NP3, laid in trenches and jointed in CM 1:1 and tested on concrete bed or directly on hard grounds, jointing and testing, complete, all as specified and as directed by Enginee-in- Charge. Note:- Excavation, earth work and concrete bed shall be measured and paid for separately under respective items of this BOQ. |
| 14 | M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes 300mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Dismantling of boarding, ceiling, wall panelling any description, fixed in any position complete all as specified. |
| 16 | S&F 15mm thick 2nd class soft wood boarding as in wall panelling, plain one side and edges tonged and grooved or rebated, fixed with nails in any situation including french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat upto satisfaction of Engr-in-Charge. |
| 17 | S&F 1.00 mm thick steel rolling shutter, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type including dismantling complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F ball bearing for rolling shutters, complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F safety lever locks mild steel with 4 levers for rolling shutter, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Note :- An amount of Rs. Rs 32,950.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender