Tender For Repair And Maintenance To Compound Wall, Fencing, Gate Etc And Other Connected B/R Works In Area Of Hq Cif(K) Under Age (I) Cif (K)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
19 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Compound Wall, Fencing, Gate Etc And Other Connected B/R Works In Area Of Hq Cif(K) Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge. |
| 3 | Taking down cement plaster, of any description on brick or stone or cement concrete walls/ceiling including raking out joints, hacking for key, scrubbing down with water, complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Rendering 15mm thick on brick work or concrete surface in cement mortar 1:4, finishing surfaces fair and even, complete all as specified and directed by the Engineer-in-Charge. |
| 5 | Demolition of cement concrete reinforced in exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | M&L for reinforced cement concrete (Nominal mix) 1:2:4 type B-1 using 20mm graded crushed stone aggragte as in tie beams, gable beams, cantilevers, bressumers, lintels over 1.5m span etc., complete all as specified as directed by the Engineer-in-Charge. |
| 7 | M&L for precast cement concrete louvers and jallies, 45mm thick (measured solid) type B0 1:2:4 (using 12.5mm graded aggregates) set in cement mortar 1:4 including all mouldings but excluding frame (Frame shall be measured separately), complete all as specified and directed by the Engineer-in-Charge. |
| 8 | M&L for TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified as directed by the Engineer-in-Charge. |
| 9 | M&L for TMT steel bars 5mm dia and over, upto and including 10mm dia as in stirrups, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified as directed by the Engineer-in-Charge. |
| 10 | Use and waste of formwork for rough finished surface of concrete to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintels, cantilevers, shelves, including supports, overhanging etc., complete all as specified as directed by the Engineer-in-Charge. |
| 11 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wooden fillets if any, not exceeding 4 kg/sqm, complete all as specified. |
| 12 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brickwork, masonry etc., complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out and removing surplus soil to a distance n.exc. 50m and making good surface in soft/ loose soil , complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified as directed by the Engineer-in-Charge. |
| 15 | M&L for MS angle iron, flat iron conforming to Fe-290- Gde E 165 as in post as directed, drilling holes, notching for wire etc cutting and twisting necessary drilling bolting and riveting or welded including FI 40 x 6 mm etc and similar work complete all as specified as directed by the Engineer-in-Charge. |
| 16 | Supply only chain link MS galvanised fencing (not exceeding 4Kg/Sqm), made out of 4mm dia galvanised iron wire of mesh 100mm x 100mm/ 50mm x 50mm in size, complete all as specified as directed by the Engineer-in-Charge. |
| 17 | Fixing only chain link fencing to RCC/mild steel Posts fixed with MS Flat iron and 3 Nos of 10mm dia. MS bars as line wire including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed by the Engineer-in-Charge. Note :- MS Flats and round bars to be measured and paid separately under relevent items of this BOQ. |
| 18 | S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified as directed by the Engineer-in-Charge. |
| 19 | S&F Mild steel screw bolts (machine made) dia of neck 12mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 10 cm not exceeding 15cm long, complete all as specified as directed by the Engineer-in-Charge. |
| 20 | S&F mild steel round bars for Fe-410-W(Gde-E 250) 8mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified as directed by the Engineer-in-Charge. |
| 21 | Framed work such as grills, gratings and intricated design incl MS angle,MS channel,flat iron, rounded bars, MS plate etc with ends of bars shouldered and or riveted or forget in to spikes incl welding as directed and fixed with screws, bolt etc incl dismantling of existing gate/grill conformimg to Fe 290,Gde E-165 complete all as specified as directed by the Engineer-in-Charge. |
| 22 | M&L for preparation of newly untreated steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 23 | M&L for preparation of old painted steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 24 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified. |
| 25 | Material and labour for preparation of old painted surfaces of walls and applying one coat of cement based paint, complete all as specified. |
| 26 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 27 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour/combat pattern having tensile strength of 550 Mpa as in roof covering/cladding to wall/ view cutter, fixed with self tapping screws complete all as specified and directed. |
| 28 | Dismantling of stone slab/tile of any description or thickness in floor, apron, pillar etc laid dry and pointed in any mortar. |
| 29 | M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 30 | Note :- An amount of Rs. Rs 50,500.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender