Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #56420072

Tender For Repair To Drain, Culvert, Path Hardstanding, Rataining Wall, Fencing And Boundary Wall In The Aor Of Age B/R-Ii Of Ge(S) Mamun.

Issued by Statutory Bodies & Commissions/Committees · Pathankot, Punjab
Tender Value
25 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair To Drain, Culvert, Path Hardstanding, Rataining Wall, Fencing And Boundary Wall In The Aor Of Age B/R-Ii Of Ge(S) Mamun.

BOQ

Name of Work:- Repair to drain, culvert, path hardstanding, rataining wall, fencing and boundary wall in the AOR of AGE B/R-II of GE(S) Mamun.
Sl. No. Item Description
1Taking down cement plaster / wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
2Dismantling fencing, wire mesh any type and stacking at site complete all as specified and directed.
3M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.
4Dismantling wrought iron or mild steel works of any description, any size and removing from site complete all as specified and directed.
5S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) including taking out existing damaged barbed wire complete all as specified and directed.
6M&L for mild steel fencing posts/struts including embeding in concrete and screwing etc. including securing bolts; including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets, round bars (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
7Fixing only chain link fencing including line wires of any mesh size, type and of any standard, rails, straining bolts etc including provision of binding wire complete all as specified and directed.Note: Supply of chain link fencing shall be measured & paid for separately.
8Supply only chain link fencing of mesh size 50mm x 50 mm, dia of wire 3.00 mm, of any type and of any standard as approved including provision of binding wire complete all as specified and directed.Note:- Weight of chain link fencing shall be ascertained by BOO convened by GE.
9M&L for MS Round bars 10mm dia and over, cut to length, bent to shape required, including crankig, bending, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia or securing with clips complete all as directed
10S&F mild steel screw bolts (machine made) 5 to 10 mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5 cm but n exc 10 cm long complete all as specified and directed.
11M&L for preparation of new surfaces of steel or iron of any discription exc 10cm width or girth and providing two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
12M&L for preparation of old painted surface of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.
13Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
14M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors, finished even & rough to receive floor top finish complete all as specified and directed.
15M&L in repairs for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block 80 mm thick, M-40 grade of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 complete all as specified and directed.
16Relaying concrete paver blocks any size 80mm thickness incl taking out existing complete all as specified and directed..
17M&L for Sand filling as sand cushion under paver blocks using clean graded fine sand including levelling watering & compacting to required gradient complete all as specified and directed.
18M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerbs, coping, bed plates benching, floor by maintaining required gradient / undulation etc slightly rounded or chamferred angles and throating, complete all as specified and directed.
19Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.
20M&L for brick work with fly ash bricks old size straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.
21All as per description of srl item No 20.00 here-in-before but EXCEPT BRICKS.Note: Servicable bricks retrieved from demolition of brick work shall be re-used.
22M&L for brick work with fly ash bricks, old size as in half brick thick walls straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.
23M&L in repairs for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in surface channels & drains including demolition of existing PCC, complete all as specified and directed.
24M&L for Extra for forming fair finished drain or channel 50 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.
25Demolition and breaking up drain pipes of size upto 300mm bore (Salt glazed ware, with hauncing etc incl necessary excavation (salt glazed stone ware, AC or reinforced concrete pipes ) set in cement mortar and taking out off trenches and removing the debris from the site complete all as specified and directed.
26M&L for 300mm bore reinforced cement concrete pipes, class NP-3, laid in trenches and jointed, complete with collars, complete all as specified and directed.
27M&L for 15mm thick rendering in cement mortar 1:4 over on brick work or concrete surfaces of walls, surface finished even and smooth without using extra cement, complete all as specified and directed.
28M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56420072
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 25 Lakhs
LAST DATE 31-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair To Drain, Culvert, Path Hardstanding, Rataining Wall, Fencing And Boundary Wall In The Aor Of Age B/R-Ii Of Ge(S) Mamun.
Basic Detail
Tender No GE(S)/M-38/2026-27
Bidding Type Tender
Location
City Pathankot
State Punjab
Key Dates
Publish Date 11 Jul 2026
Submission Date 31 Jul 2026
Open Date 08 Aug 2026
Finance
Tender Value 25 Lakhs
Tender Fee 500
EMD 50000
Exemption Available
Document List
11157bff-86a2-4f83-9f21-cb9b8a6aa0ec.html
38TENDERDOCUMENT.pdf
BOQ_871266.xls
Tendernotice_1 (6).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 31, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Aug 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 27 days

Tender Documents

Download All (ZIP) ↓
html

11157bff-86a2-4f83-9f21-cb9b8a6aa0ec.html

pdf

38TENDERDOCUMENT.pdf

xls

BOQ_871266.xls

pdf

Tendernotice_1 (6).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders