Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #56419247

Bids Are invited for Repair And Replacement Of Standby Power Supply To Mrs Alongwith Connected Items

Issued by Statutory Bodies & Commissions/Committees · Jammu, Jammu and Kashmir
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
10 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
254

Project Description

Bids Are invited for Repair And Replacement Of Standby Power Supply To Mrs Alongwith Connected Items Material And Labour In Replacement For Acsr - Material And Labour In Replacement For Acsr Conductor Any Size Drawn Straight Horizontal On Over Head Lines On Existing Poles Including Binding With Insulators Weight Of Conductor Shall Be Measured Straight Horizontal Distance Between Centre Of Two Adjacent Ht Lt Poles And Calculating Weight Of Conductor Of Size Length By Adding 3Percent Extra For Sag Jointing Jumpers Etc Complete All As Specified And Directed. , Supply And Erect Steel Tubular Swaged Poles - Supply And Erect Steel Tubular Swaged Poles Complete With Cast Iron Base Plate, Final Taper Plug, Bolts Nuts And Screws As Specified Type 410 Sp 55 11 Mtr Long Erecting In Position All As Specified , Supply And Fixing In Replacement Of Stay Assembly - Supply And Fixing In Replacement Of Stay Assembly Comprising Of 7 Oblique 2.50Mm Galvanized Ms Stay Wire Of Reqd Length, Fixed To Poles With And Including Of Fi Cl S Made Out Of Fi 40X6mm And Nuts Bolts Washers Of Suitable Size Ms Stay Bow 14Mm Dia Galvanized 40Cm Long Ms Galvanised Stay Rod Threaded With Nut 16Mm Dia 21 Cm Long With Washers Ms Stay Plate Galvanized 230X30x6mm Incl Necessary Excavation And Pcc , Material And Labour In Replacement Cross Arms - Material And Labour In Replacement Cross Arms Bracings Supports Cl S And Back Plates Fabricated From Structural Steel Sections Including Nut Bolts Washers Welding Bending Cold And Hot Drilling Holes For Bolts In Any Shape Or Size As Indicate Or Directed And Inclusive Of One Primer Coat One Under Coat And One Finishing Coat Of Paint. , Material And Labour For Restrainging Acsr Conductor - Material And Labour For Restrainging Acsr Conductor 33Kv Ht Line Providing Suitable Proper Sag All As Specified And Directed. , Prunning Of Trees Of Over Head - Prunning Of Trees Of Over Head 33Kv Ht Lines By Taking Proper Shutdown & Removing The Same From Site Upto A Distance Of 50 Mtr All As Directed By Engr In Charge. , Supply And Fixing In Replacement Loop Type - Supply And Fixing In Replacement Loop Type Porcelain White, Brown Or Green Large Size With Cover Dimensions Of 90Mmx140mm Clearance Of Whole 25.5 Mm As Specified , Supply And Fixing In Replacement Of Pin Type - Supply And Fixing In Replacement Of Pin Type Porcelain White Brown Or Green Insulator Including One Galvanized Mild Steel Spindle Two Galvanised Iron Washers And One Galvanised Nut 50Mm Height 65Mm Dia For Working Pressure 33000 Volts Grade.All As Specified And , Excavation In Trenches In Soft - Excavation In Trenches In Soft Oblique Loose Soil Not Exceeding 1.50 M Wide And Not Exceeding 1.50 M In Depth For Foundation Of Poles Stay Cable Pipes Etc And Getting Out Complete All As Specified. , Removal Of Surplus Spoil To A Distance - Removal Of Surplus Spoil To A Distance Not Exc. 50M And Depositing Where Directed At A Level Not Exc. 1.5M Above The Starting Point Complete All As Specified. , Material And Labour For Pcc - Material And Labour For Pcc 1 Ratio 4 Ratio 8 Type D2 Using 40Mm Graded Broken Stone Aggregate As In Mass Concrete In Foundation Of Poles Complete All As Soecified. , Material And Labour - Material And Labour For Pcc 1 Ratio 3 Ratio 6 Type D2 Using 20Mm Graded Broken Stone Aggregate As In Mass Concrete In Foundation Of Stays Complete All As Soecified. , Cable End Termination Jointing Kit - Cable End Termination Jointing Kit For 33 Kv Earthed Grade Cable Outdoor Type Heat Shrink Type Joint Complete With Jointing Material And Accessories Suitable For Single Core Xlpe Sqmm And Entire Satisfaction Of Engnr-In-Charge Complete All As Specifiedand Directed , Material And Labour For Testing - Material And Labour For Testing Of Faulty Ht Cable 33Kv By Using Ht Voltage Fault Locating Machine And Finding The Fault And To Be Repaired The Same Including All T And P As Required On Site Complete All As Directed. , Supply Testing And Laying Xlpe - Supply Testing And Laying Xlpe Insulated, Screened Pvc Bedded Galvanised Steel Strip Or Wire Armoured Heavy Duty Electric Cable With Stranded Aluminium Conductor 33000 Volts Earthed Grade Of Size 300 Sqmm Single Core Complete , Supply And Fixing Of Cable Jointing Kit For 33 Kv - Supply And Fixing Of Cable Jointing Kit For 33 Kv Earthed Grade Cable For Straight Through Joint Heat Shrink Type Joint Complete With Jointing Material And Accessories Suitable For Single Core Xlpe Armoured Al Conductor Cable Of Size 300 Sq Mm And Entire Satisfaction Of Total Quantity : 254

BOQ

Sl. No. Item TitleItem Description
1Material and labour in replacement for ACSRMaterial and labour in replacement for ACSR conductor any size drawn straight horizontal on over head lines on existing poles including binding with insulators weight of conductor shall be measured straight horizontal distance between centre of two adjacent HT LT poles and calculating weight of conductor of size length by adding 3percent extra for sag jointing jumpers etc complete all as specified and directed.
2Supply and erect steel tubular swaged polesSupply and erect steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts nuts and screws as specified type 410 SP 55 11 mtr long erecting in position all as specified
3Supply and fixing in replacement of stay assemblySupply and fixing in replacement of stay assembly comprising of 7 oblique 2.50mm galvanized MS stay wire of reqd length, fixed to poles with and including of FI clamps made out of FI 40x6mm and nuts bolts washers of suitable size MS stay bow 14mm dia galvanized 40cm long MS galvanised stay rod threaded with nut 16mm dia 21 Cm long with washers MS stay plate galvanized 230x30x6mm incl necessary Excavation and PCC
4Material and Labour in replacement cross armsMaterial and Labour in replacement cross arms bracings supports clamps and back plates fabricated from structural steel sections including nut bolts washers welding bending cold and hot drilling holes for bolts in any shape or size as indicate or directed and inclusive of one primer coat one under coat and one finishing coat of paint.
5Material and labour for restrainging ACSR conductorMaterial and labour for restrainging ACSR conductor 33KV HT line providing suitable proper sag all as specified and directed.
6Prunning of trees of over headPrunning of trees of over head 33KV HT lines by taking proper shutdown & removing the same from site upto a distance of 50 mtr all as directed by Engr in Charge.
7Supply and Fixing in replacement loop typeSupply and Fixing in replacement loop type porcelain white, brown or green large size with cover dimensions of 90mmx140mm clearance of whole 25.5 mm as specified
8Supply and Fixing in replacement of pin typeSupply and Fixing in replacement of pin type porcelain white brown or green insulator including one galvanized mild steel spindle two galvanised iron washers and one galvanised nut 50mm height 65mm dia for working pressure 33000 volts grade.all as specified and
9Excavation in trenches in softExcavation in trenches in soft oblique loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation of poles stay cable pipes etc and getting out complete all as specified.
10Removal of surplus spoil to a distanceRemoval of surplus spoil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified.
11Material and labour for PCCMaterial and labour for PCC 1 ratio 4 ratio 8 type D2 using 40mm graded broken stone aggregate as in mass concrete in foundation of poles complete all as soecified.
12Material and labourMaterial and labour for PCC 1 ratio 3 ratio 6 type D2 using 20mm graded broken stone aggregate as in mass concrete in foundation of stays complete all as soecified.
13Cable end termination jointing kitCable end termination jointing kit for 33 KV Earthed grade cable outdoor type heat shrink type joint complete with jointing material and accessories suitable for single core XLPE Sqmm and entire satisfaction of Engnr-in-Charge complete all as specifiedand directed
14Material and Labour for testingMaterial and Labour for testing of faulty HT cable 33KV by using HT voltage fault locating machine and finding the fault and to be repaired the same including all T and P as required on site complete all as directed.
15Supply testing and laying XLPESupply testing and laying XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor 33000 volts Earthed grade of size 300 sqmm single core complete
16Supply and Fixing of Cable jointing kit for 33 KVSupply and Fixing of Cable jointing kit for 33 KV Earthed grade cable for straight through joint heat shrink type joint complete with jointing material and accessories suitable for single core XLPE armoured Al conductor cable of size 300 sq mm and entire satisfaction of

AI Tender Summary

OUR REF NO 56419247
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 23-07-2026
Authority
Authority Name Indian Army
Work Description Bids Are invited for Repair And Replacement Of Standby Power Supply To Mrs Alongwith Connected Items Material And Labour In Replacement For Acsr - Material And Labour In Replacement For Acsr Conductor Any Size Drawn Straight Horizontal On Over Head Lines On Existing Poles Including Binding With Insulators Weight Of Conductor Shall Be Measured Straight Horizontal Distance Between Centre Of Two Adjacent Ht Lt Poles And Calculating Weight Of Conductor Of Size Length By Adding 3Percent Extra For Sag Jointing Jumpers Etc Complete All As Specified And Directed. , Supply And Erect Steel Tubular Swaged Poles - Supply And Erect Steel Tubular Swaged Poles Complete With Cast Iron Base Plate, Final Taper Plug, Bolts Nuts And Screws As Specified Type 410 Sp 55 11 Mtr Long Erecting In Position All As Specified , Supply And Fixing In Replacement Of Stay Assembly - Supply And Fixing In Replacement Of Stay Assembly Comprising Of 7 Oblique 2.50Mm Galvanized Ms Stay Wire Of Reqd Length, Fixed To Poles With And Including Of Fi Cl S Made Out Of Fi 40X6mm And Nuts Bolts Washers Of Suitable Size Ms Stay Bow 14Mm Dia Galvanized 40Cm Long Ms Galvanised Stay Rod Threaded With Nut 16Mm Dia 21 Cm Long With Washers Ms Stay Plate Galvanized 230X30x6mm Incl Necessary Excavation And Pcc , Material And Labour In Replacement Cross Arms - Material And Labour In Replacement Cross Arms Bracings Supports Cl S And Back Plates Fabricated From Structural Steel Sections Including Nut Bolts Washers Welding Bending Cold And Hot Drilling Holes For Bolts In Any Shape Or Size As Indicate Or Directed And Inclusive Of One Primer Coat One Under Coat And One Finishing Coat Of Paint. , Material And Labour For Restrainging Acsr Conductor - Material And Labour For Restrainging Acsr Conductor 33Kv Ht Line Providing Suitable Proper Sag All As Specified And Directed. , Prunning Of Trees Of Over Head - Prunning Of Trees Of Over Head 33Kv Ht Lines By Taking Proper Shutdown & Removing The Same From Site Upto A Distance Of 50 Mtr All As Directed By Engr In Charge. , Supply And Fixing In Replacement Loop Type - Supply And Fixing In Replacement Loop Type Porcelain White, Brown Or Green Large Size With Cover Dimensions Of 90Mmx140mm Clearance Of Whole 25.5 Mm As Specified , Supply And Fixing In Replacement Of Pin Type - Supply And Fixing In Replacement Of Pin Type Porcelain White Brown Or Green Insulator Including One Galvanized Mild Steel Spindle Two Galvanised Iron Washers And One Galvanised Nut 50Mm Height 65Mm Dia For Working Pressure 33000 Volts Grade.All As Specified And , Excavation In Trenches In Soft - Excavation In Trenches In Soft Oblique Loose Soil Not Exceeding 1.50 M Wide And Not Exceeding 1.50 M In Depth For Foundation Of Poles Stay Cable Pipes Etc And Getting Out Complete All As Specified. , Removal Of Surplus Spoil To A Distance - Removal Of Surplus Spoil To A Distance Not Exc. 50M And Depositing Where Directed At A Level Not Exc. 1.5M Above The Starting Point Complete All As Specified. , Material And Labour For Pcc - Material And Labour For Pcc 1 Ratio 4 Ratio 8 Type D2 Using 40Mm Graded Broken Stone Aggregate As In Mass Concrete In Foundation Of Poles Complete All As Soecified. , Material And Labour - Material And Labour For Pcc 1 Ratio 3 Ratio 6 Type D2 Using 20Mm Graded Broken Stone Aggregate As In Mass Concrete In Foundation Of Stays Complete All As Soecified. , Cable End Termination Jointing Kit - Cable End Termination Jointing Kit For 33 Kv Earthed Grade Cable Outdoor Type Heat Shrink Type Joint Complete With Jointing Material And Accessories Suitable For Single Core Xlpe Sqmm And Entire Satisfaction Of Engnr-In-Charge Complete All As Specifiedand Directed , Material And Labour For Testing - Material And Labour For Testing Of Faulty Ht Cable 33Kv By Using Ht Voltage Fault Locating Machine And Finding The Fault And To Be Repaired The Same Including All T And P As Required On Site Complete All As Directed. , Supply Testing And Laying Xlpe - Supply Testing And Laying Xlpe Insulated, Screened Pvc Bedded Galvanised Steel Strip Or Wire Armoured Heavy Duty Electric Cable With Stranded Aluminium Conductor 33000 Volts Earthed Grade Of Size 300 Sqmm Single Core Complete , Supply And Fixing Of Cable Jointing Kit For 33 Kv - Supply And Fixing Of Cable Jointing Kit For 33 Kv Earthed Grade Cable For Straight Through Joint Heat Shrink Type Joint Complete With Jointing Material And Accessories Suitable For Single Core Xlpe Armoured Al Conductor Cable Of Size 300 Sq Mm And Entire Satisfaction Of Total Quantity : 254
Basic Detail
Tender No GEM/2026/B/7753472
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 11 Jul 2026
Submission Date 23 Jul 2026
Open Date 23 Jul 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
ae6ef765-367f-4d6c-adbb-226988de5664.pdf
9569041_Boq_1.xlsx
bidmrs_2026-07-07-13-07-13_76c33f53d253624db53014058ea07878.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Jul 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
pdf

ae6ef765-367f-4d6c-adbb-226988de5664.pdf

xlsx

9569041_Boq_1.xlsx

pdf

bidmrs_2026-07-07-13-07-13_76c33f53d253624db53014058ea07878.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders