Defence Statutory Bodies & Commissions/Committees Closing in 11 days TDR #56419231

Bids Are invited for Repair And Maintenance Of Servo Voltage Stabilizer And Miscellaneous Items

Issued by Statutory Bodies & Commissions/Committees · Jammu, Jammu and Kashmir
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
11 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
749

Project Description

Bids Are invited for Repair And Maintenance Of Servo Voltage Stabilizer And Miscellaneous Items Taking Out Servo Voltage Stabilizer Of Capacity - Taking Out Servo Voltage Stabilizer Of Capacity 180 Kva 3 Phase 4 Wire 440 V Ac Supply For Unbalanced Balanced Load Oil Cooled From Foundation After Disconnecting All Electrical Connections Etc. Dismentling For Pre Inspection By Lifting Of Assembly And Repairing Replacement Of Worn Out Parts And Testing After Re Installatio On Same Foundation. , Rewinding Of Dimmer Coil Various Of Stabilizer - Rewinding Of Dimmer Coil Various Of Stabilizer Of Any Capacity With Super Enamelled Copper Winding Wire Of Appropriate Gauge As Per Existing Pattern Alongwith Insulating Material And Made The Surface For Suitable Contact With Carbon Bush Complete After Removing Existing Burnt Winding Wire And Cleaing Complete All As Spd And Directed. , Supply And Fixing In Replacement Of Dimmer Stat - Supply And Fixing In Replacement Of Dimmer Stat 75 S Oil Cooled Single Phase , Supply And Fixing In Replacement Sensing Control Card - Supply And Fixing In Replacement Sensing Control Card Pcb To Control The Voltage Variation At Upper And Lower Limit Complete , Supply And Fixing In Repair Servo Stabilizer - Supply And Fixing In Repair Servo Stabilizer Relay 150 To 200 Complete. , Supply And Filling New Transformer Oil - Supply And Filling New Transformer Oil In Voltage Stabilizer For Topping Up Level Or For Replacement Of Unfit Oil. Dielectric Strength Should Not Be Less Than 45 Kv. , Supply And Fix Triple Pole God Mechanically - Supply And Fix Triple Pole God Mechanically Operated Mounted On Insulator And Steel Frame With Operating Mechanism Worked From Ground Level For Current Rating Upto 200 S Suitable For 11 Kv Including Taking Out Old God Complete. , Material And Labour For Cable Jointing Kit End Joint - Material And Labour For Cable Jointing Kit End Joint For 11 Kv Earthed Grade Cable For Straight Through Cold Shrink Type Joint Complete With Jointing Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 300 Sqmm. , Filtration Dehydration Of Transformer Oil Of Three Phase - Filtration Dehydration Of Transformer Oil Of Three Phase Servo Voltage Stabilizer And Step Down Transformer 11 0.433 Kv For Increasing Dielectric Strength Not Less Than 45 Kv. , Supply And Fixing In Replacement Steel Tubler Swaged Poles - Supply And Fixing In Replacement Steel Tubler Swaged Poles Complete With Cast Iron Base Plate Finial Taper Plug Bolts Nuts And Screws As Specified Type 410 Sp31 09 Mtr Long And Duly Painted With Two Coats Anticirrosive Paint Internally Upto Planting Depth Alternate Black And Yellow Straps Of Synthetic Enamel Paint 30 Cm Each Upto 1.5 Mtr From Ground Level And Remaining Pole With Aluminium Paint Including Wiring Complete. , Material And Labour Plain Cement Concrete - Material And Labour Plain Cement Concrete 1 Ratio 4 Ratio 8 Type D2 Using 40Mm Graded Stone Aggregate For Foundation Of Poles. , Material And Labour Pcc - Material And Labour Pcc 1 Ratio 3 Ratio 6 Type C1 Using 20 Mm Graded Stone Aggregate For Coping Of Poles Road Plinth Blocks Of Lt Poles Etc Incl Fair Finishing The Exposed Surfaces Even And Smooth Without Using Extra Cement Including Necessary Form Work Complete. , Supply And Fixing In Repair Pin Type Porcelain - Supply And Fixing In Repair Pin Type Porcelain Vitreous White Brown Or Green Insulator Including One Galvanised Mild Steel Spindle Two Galvanised Iron Washers And One Galvanised Iron Nut 150Mm Height 150Mm Dia For 11000 Volts Grade Complete. , Supply And Fixing In Repair Disc Type Insulator - Supply And Fixing In Repair Disc Type Insulator Porcelain Vitreous 145Mm High And 255Mm Dia Ball And Socket Type White, Brown Or Green Two In Series Assembly For Tension With Tension Cl S For Conductors Working Pressure 11000 Volt Complete. , Ng In Trenches In Hard Dense Soft Soil - Excavating In Trenches In Hard Dense Soft Soil N Exc 1.5 M Wide And N Exc 1.5 M In Depth For Foundation Of Poles Trenches For Laying Of Cable Or For Shafts Wells Cesspits Manholes Pier Holes Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out Complete. , Removing Excavated Material To A Distance Not Exceeding - Removing Excavated Material To A Distance Not Exceeding 50 Mtr And Deposting Where Directed At A Level Not Exc. 1.5 Mtr Above The Starting Point. , Returing Filling In Including Spreading Levelling Watering - Returing Filling In Including Spreading Levelling Watering And Well Ramming In Layers Not Exceeding 25 Cm Each All As Required And Directed. Total Quantity : 749

BOQ

Sl. No. Item TitleItem Description
1Taking out servo voltage stabilizer of capacityTaking out servo voltage stabilizer of capacity 180 KVA 3 phase 4 wire 440 V AC supply for unbalanced balanced load oil cooled from foundation after disconnecting all electrical connections etc. Dismentling for pre inspection by lifting of assembly and repairing replacement of worn out parts and testing after re installatio on same foundation.
2Rewinding of dimmer coil Various of stabilizerRewinding of dimmer coil Various of stabilizer of any capacity with super enamelled copper winding wire of appropriate gauge as per existing pattern alongwith insulating material and made the surface for suitable contact with carbon bush complete after removing existing burnt winding wire and cleaing complete all as spd and directed.
3Supply and Fixing in replacement of dimmer statSupply and Fixing in replacement of dimmer stat 75 amps oil cooled single phase
4Supply and Fixing in replacement sensing control cardSupply and Fixing in replacement sensing control card PCB to control the voltage variation at upper and lower limit complete
5Supply and Fixing in repair servo stabilizerSupply and Fixing in repair servo stabilizer relay 150 to 200 Amp complete.
6Supply and filling new transformer oilSupply and filling new transformer oil in voltage stabilizer for topping up level or for replacement of unfit oil. Dielectric strength should not be less than 45 KV.
7Supply and fix Triple pole GOD mechanicallySupply and fix Triple pole GOD mechanically operated mounted on insulator and steel frame with Operating mechanism worked from ground level for current rating upto 200 amps suitable for 11 KV including taking out old GOD complete.
8Material and Labour for Cable jointing kit end jointMaterial and Labour for Cable jointing kit end joint for 11 KV Earthed grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 300 Sqmm.
9Filtration dehydration of transformer oil of three phaseFiltration dehydration of transformer oil of three phase servo voltage stabilizer and step down transformer 11 0.433 kv for increasing dielectric strength not less than 45 KV.
10Supply and Fixing in replacement Steel tubler swaged polesSupply and Fixing in replacement Steel tubler swaged poles complete with cast iron base plate finial taper plug bolts nuts and screws as specified type 410 SP31 09 mtr long and duly painted with two coats anticirrosive paint internally upto planting depth alternate black and yellow straps of synthetic enamel paint 30 cm each upto 1.5 mtr from ground level and remaining pole with aluminium paint including wiring complete.
11Material and Labour Plain cement concreteMaterial and Labour Plain cement concrete 1 ratio 4 ratio 8 type D2 using 40mm graded stone aggregate for foundation of poles.
12Material and Labour PCCMaterial and Labour PCC 1 ratio 3 ratio 6 type C1 using 20 mm graded stone aggregate for coping of poles road plinth blocks of LT poles etc incl fair finishing the exposed surfaces even and smooth without using extra cement including necessary form work complete.
13Supply and Fixing in repair Pin type porcelainSupply and Fixing in repair Pin type porcelain vitreous white brown or green insulator including one galvanised mild steel spindle two galvanised iron washers and one galvanised iron nut 150mm height 150mm dia for 11000 volts grade complete.
14Supply and Fixing in repair Disc type insulatorSupply and Fixing in repair Disc type insulator porcelain vitreous 145mm high and 255mm dia ball and socket type white, brown or green Two in series assembly for tension with tension clamps for conductors working pressure 11000 volt complete.
15ng in trenches in Hard dense soft soilExcavating in trenches in Hard dense soft soil n exc 1.5 m wide and n exc 1.5 m in depth for foundation of poles trenches for laying of cable or for shafts wells cesspits manholes pier holes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete.
16Removing excavated material to a distance not exceedingRemoving excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point.
17Returing filling in including spreading levelling wateringReturing filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm each all as required and directed.

AI Tender Summary

OUR REF NO 56419231
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 23-07-2026
Authority
Authority Name Indian Army
Work Description Bids Are invited for Repair And Maintenance Of Servo Voltage Stabilizer And Miscellaneous Items Taking Out Servo Voltage Stabilizer Of Capacity - Taking Out Servo Voltage Stabilizer Of Capacity 180 Kva 3 Phase 4 Wire 440 V Ac Supply For Unbalanced Balanced Load Oil Cooled From Foundation After Disconnecting All Electrical Connections Etc. Dismentling For Pre Inspection By Lifting Of Assembly And Repairing Replacement Of Worn Out Parts And Testing After Re Installatio On Same Foundation. , Rewinding Of Dimmer Coil Various Of Stabilizer - Rewinding Of Dimmer Coil Various Of Stabilizer Of Any Capacity With Super Enamelled Copper Winding Wire Of Appropriate Gauge As Per Existing Pattern Alongwith Insulating Material And Made The Surface For Suitable Contact With Carbon Bush Complete After Removing Existing Burnt Winding Wire And Cleaing Complete All As Spd And Directed. , Supply And Fixing In Replacement Of Dimmer Stat - Supply And Fixing In Replacement Of Dimmer Stat 75 S Oil Cooled Single Phase , Supply And Fixing In Replacement Sensing Control Card - Supply And Fixing In Replacement Sensing Control Card Pcb To Control The Voltage Variation At Upper And Lower Limit Complete , Supply And Fixing In Repair Servo Stabilizer - Supply And Fixing In Repair Servo Stabilizer Relay 150 To 200 Complete. , Supply And Filling New Transformer Oil - Supply And Filling New Transformer Oil In Voltage Stabilizer For Topping Up Level Or For Replacement Of Unfit Oil. Dielectric Strength Should Not Be Less Than 45 Kv. , Supply And Fix Triple Pole God Mechanically - Supply And Fix Triple Pole God Mechanically Operated Mounted On Insulator And Steel Frame With Operating Mechanism Worked From Ground Level For Current Rating Upto 200 S Suitable For 11 Kv Including Taking Out Old God Complete. , Material And Labour For Cable Jointing Kit End Joint - Material And Labour For Cable Jointing Kit End Joint For 11 Kv Earthed Grade Cable For Straight Through Cold Shrink Type Joint Complete With Jointing Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 300 Sqmm. , Filtration Dehydration Of Transformer Oil Of Three Phase - Filtration Dehydration Of Transformer Oil Of Three Phase Servo Voltage Stabilizer And Step Down Transformer 11 0.433 Kv For Increasing Dielectric Strength Not Less Than 45 Kv. , Supply And Fixing In Replacement Steel Tubler Swaged Poles - Supply And Fixing In Replacement Steel Tubler Swaged Poles Complete With Cast Iron Base Plate Finial Taper Plug Bolts Nuts And Screws As Specified Type 410 Sp31 09 Mtr Long And Duly Painted With Two Coats Anticirrosive Paint Internally Upto Planting Depth Alternate Black And Yellow Straps Of Synthetic Enamel Paint 30 Cm Each Upto 1.5 Mtr From Ground Level And Remaining Pole With Aluminium Paint Including Wiring Complete. , Material And Labour Plain Cement Concrete - Material And Labour Plain Cement Concrete 1 Ratio 4 Ratio 8 Type D2 Using 40Mm Graded Stone Aggregate For Foundation Of Poles. , Material And Labour Pcc - Material And Labour Pcc 1 Ratio 3 Ratio 6 Type C1 Using 20 Mm Graded Stone Aggregate For Coping Of Poles Road Plinth Blocks Of Lt Poles Etc Incl Fair Finishing The Exposed Surfaces Even And Smooth Without Using Extra Cement Including Necessary Form Work Complete. , Supply And Fixing In Repair Pin Type Porcelain - Supply And Fixing In Repair Pin Type Porcelain Vitreous White Brown Or Green Insulator Including One Galvanised Mild Steel Spindle Two Galvanised Iron Washers And One Galvanised Iron Nut 150Mm Height 150Mm Dia For 11000 Volts Grade Complete. , Supply And Fixing In Repair Disc Type Insulator - Supply And Fixing In Repair Disc Type Insulator Porcelain Vitreous 145Mm High And 255Mm Dia Ball And Socket Type White, Brown Or Green Two In Series Assembly For Tension With Tension Cl S For Conductors Working Pressure 11000 Volt Complete. , Ng In Trenches In Hard Dense Soft Soil - Excavating In Trenches In Hard Dense Soft Soil N Exc 1.5 M Wide And N Exc 1.5 M In Depth For Foundation Of Poles Trenches For Laying Of Cable Or For Shafts Wells Cesspits Manholes Pier Holes Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out Complete. , Removing Excavated Material To A Distance Not Exceeding - Removing Excavated Material To A Distance Not Exceeding 50 Mtr And Deposting Where Directed At A Level Not Exc. 1.5 Mtr Above The Starting Point. , Returing Filling In Including Spreading Levelling Watering - Returing Filling In Including Spreading Levelling Watering And Well Ramming In Layers Not Exceeding 25 Cm Each All As Required And Directed. Total Quantity : 749
Basic Detail
Tender No GEM/2026/B/7756292
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 11 Jul 2026
Submission Date 23 Jul 2026
Open Date 23 Jul 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
88867240-d0ad-4982-a58a-c7baee46a528.pdf
9572119_Boq_1.xlsx
jobbibservo_2026-07-07-17-42-35_a8e9173b09bbd1680e1115a5a994104e.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Jul 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
pdf

88867240-d0ad-4982-a58a-c7baee46a528.pdf

xlsx

9572119_Boq_1.xlsx

pdf

jobbibservo_2026-07-07-17-42-35_a8e9173b09bbd1680e1115a5a994104e.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders