Tender For Comprehensive Repairs Of Sentry Post, Guard Room, Toilets And Internal Electrification Under Ge 862 Ews
Tender Value
25 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repairs Of Sentry Post, Guard Room, Toilets And Internal Electrification Under Ge 862 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I (B/R works)M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 15 mm bore and connections including taking down existing pipe, complete all as specifed and directed. |
| 2 | M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 20 mm bore and connections including taking down existing pipe, complete all as specifed and directed. |
| 3 | S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor, complete all as specified and directed. |
| 4 | S&F in repair 75 mm bore PVC (SWR) bends of any radius with access to door, complete all as specifed and directed. |
| 5 | S&F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches/wall, complete all as specifed and directed. |
| 6 | S&F in repair 110 mm bore PVC (SWR) bends of any radius with access to door, complete all as specifed and directed. |
| 7 | M&L for 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc including taking down old tile, complete all as specifed and directed. |
| 8 | S&F in repair of vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminized hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality, complete all as specifed and directed. |
| 9 | S&F in repair of vitreous China water closet (squatt pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed. |
| 10 | S&F in repair of vitreous china full stall urinals,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe, complete all as specified and directed. |
| 11 | S&F in repair vitreous china urinals, flat back of size 465mm x 355mm x 265mm, white, bowl type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe with grating and union for discharge pipe including connecting to waste pipe, complete all as specified and directed. |
| 12 | S&F in repair vitreous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gasket, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements, complete all as specified and directed. |
| 13 | S&F in repair of vitreous China wash basin, white flat back, size 550x400mm including waste pipe,CP Pillar taps, waste chain and plug and parcelin stopper brackets, complete all as specified and directed. |
| 14 | S&F in repair vitreous China pedestal wash basin, white flat back, including waste pipe,CP Pillar taps, waste chain and plug and porcelain stopper brackets, complete all as specified and directed. |
| 15 | All as per Item No 14.00 here-in-before but counter top type. |
| 16 | S&F in repair of 15mm bore brass chromium plated wall mixer fixed with shower rose and connecting to wall mixer, complete all as specified and directed. |
| 17 | S&F in repair of 15 mm bore brass CP wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 18 | S&F rotational moulded polythene three layered water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with brass tank nipples,including Ball brass valves suitable for 20 mm bore complete all as specified in SSR Part-I including dismantling of existing tank and removing to store, complete all as specified and directed. |
| 19 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with Brass tank nipples, including Ball brass valves suitable for 20 mm bore complete all as specified in SSR Part-I including dismantling of existing tank and removing to store, complete all as specified and directed. |
| 20 | S&F in repair 15mm chromium plated health faucet (hand shower), inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as specified and directed. |
| 21 | S&F in repair 15 mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe, complete all as specified and directed. |
| 22 | S&F in repair brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc, complete all as specified and directed. |
| 23 | S&F PVC waste pipe 600/900mm long suitable for Wash hand basins and urinals including connecting, complete all as specified and directed. |
| 24 | S&F in repair of PVC connection pipe 15mm dia for wash basin and flushing cistern with SS nuts of length 600 mm, complete all as specified and directed. |
| 25 | S&F in repair 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 26 | S&F in repair toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. |
| 27 | S&F in repair CP soap dish holder fixed with including chromium plated brass screws, complete all as specified and directed. |
| 28 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 29 | S&F in repair of chromium plated tubular towel rail 20 mm dia \\"D\\" type 60 cm long between flange,fixed with screw wooden / plastic cleats, complete all as specified and directed. |
| 30 | S&F in repair SS Towel Ring, complete all as specified and directed. |
| 31 | S&F in repair concealed type CP Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pressure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 32 | S&F in repair 15 mm dia CP bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 33 | S&F in repair CP angle valve, cast copper alloy, fancy type,chromium plated suitable for iron pipe and one end and PVC connector on other, ISI marked, complete all as specified and directed. |
| 34 | S&F in repair gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and directed. |
| 35 | S&F in repair gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia, complete all as specified and directed. |
| 36 | S&F in repair 600 x 450mm bavelled edge mirrior of selected quality glass mounted on 6mm AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 37 | S&F in repair premium multipurpose wall mounted storage cabinet with mirror of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror, complete all as specified and directed. |
| 38 | S&F in repair CP grating with floor trap suitable for 75 mm bore floor trap and fixed with white cement in square or circular shape and with provision of hole for waste pipe connection, complete all as specified and directed. |
| 39 | S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 40 | S&F in repair for 15 mm dia Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed, complete all as specified and directed. |
| 41 | S&F in repair for 20 mm dia Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed, complete all as specified and directed. |
| 42 | Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed. |
| 43 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed. |
| 44 | Taking down shutters of any description area n exc 1 sqm each and removing, complete all as specified and directed. |
| 45 | Labour only for repair to aluminium doors without taking down shutter or frame of any size any description including tightning ,adjusting the shutter and handles refixing of glass ,rubber beading or cleat and mortise lock etc, complete all as specified and directed. |
| 46 | Labour only for repair to aluminium doors by taking down shutter of any size any description including tightening a djusting the shutter and handles refixing of glass ,rubber beading or cleat and mortise lock and repairs to floor spring hinges by adjusting the screws,nails ,nuts with greasing and fixing at same position etc, complete all as specified and directed. |
| 47 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all as per architectural drawings, complete all as specified and directed. |
| 48 | S&F aluminium powder coated of any colour window and ventilator with one or more shutters fixed / side hung type without sash bar , aluminium section weighing 0.55 kg/m including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B-21 100mm long, suitable handle, aluminium tower bolt complete all as specified and directed.Note :- Minimum thickness of powder coating not less than 50 micron. |
| 49 | S&F aluminium powder coated of any colour door with one or more shutters aluminium section weighing 0.55 kg/m including 5 mm thick plain/ coloured/ frosted sheet glass or ACP sheet and stainless steel wiremesh and connected itmes such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long , hinges type B-21 100mm long , suitable handle, aluminium tower bolt including mortice lock and brass door stopper, complete all as specified and directed. Note :- Minimum thickness of powder coating not less than 50 micron. |
| 50 | S&F aluminum powder coated of any color three track sliding window with two or more shutter including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long ,SS hinges type B-21 100mm long , suitable handle, alum tower bolt and using sections as given in 'JINDAL' catalogue, including making good to the disturbed portion, complete as specified and directedNote :- Minimum thickness of powder coating not less than 50 micron. |
| 51 | S&F aluminum powder coated of any color fixed partition with frame of size 101.6mm x 44.45mmx1.27mm thick and 101.60mmx44.45mmx1.20mm thick with total height up to 3.20m. The panels shall be made out of 5mm thick plain /tinted(frosted) glass in top & bottom or ACP sheet including necessary jointing cleats, glazing clips , rubber packing, powder coated aluminum snap beading screw etc including dismantling of existing partition of any type and making good to the disturbed portion, complete all as specified and directed.Note :- Minimum thickness of powder coating not less than 50 micron. |
| 52 | S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, holdfast with and including concrete bed block, lock strike plates, complete all as specified and directed. |
| 53 | All as per Item No 52.00 here-in-before but frame size of 105x60mm. |
| 54 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, holdfast and concrete bed block complete with outer side glazing bars shutter and inner side wire mewh shutter including glass panes, dovetailed or welded, complete all as specified and directed. |
| 55 | All as per Item No 54.00 here-in-before but without glazing bars. |
| 56 | S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay, complete all as specified and directed. |
| 57 | M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; side hung or barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 58 | S&F factory made second class Hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers, complete all as specified and directed. |
| 59 | S&F 35 mm thick second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed. |
| 60 | S & F of 100 mm long mild steel butt hinges, medium weight cold rolled, complete all as specified and directed. |
| 61 | S&F in repair door closer hydraulically regulated, aluminium (extruded section body) desigtnation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg, complete all as specified and directed. |
| 62 | S&F in repair Mild steel mortice lock, vertical type, size 100 mm, 4 levers in aluminium door, complete all as specified and directed. |
| 63 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 64 | S&F 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 65 | S&F 125 mm long extruded anodised aluminium alloy handle, fabricated type, complete all as specified and directed. |
| 66 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 67 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50sqm in each pane, complete all as specified and directed. |
| 68 | Hacking out old broken glass (any thickness size, quality or description from wooden or steel frames glazed with putty/beads, complete all as specified and directed. |
| 69 | S&F GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 70 | S&F in repair GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 71 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wood and wood based surface including preparation, complete all as specified and directed. |
| 72 | S&F in repair 140mm long door stopper (floor mounted) of brass body and tongue with hard drawn steel spring, complete all as specified and directed. |
| 73 | S&F in repair SS curtain rod 20mm dia (of approved colour and design), complete all as specified and directed. |
| 74 | S&F in repair curtain brackets with finials of SS type (of approved colour and design) including fixing to walls with MS full screws(including fixing of wooden pieces of required size of walls), complete all as specified and directed. |
| 75 | M&L for plain cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base for tiling, including demolition of old concrete of any type, complete all as specified and directed. |
| 76 | M&L for vitrified ceramic tiles light shade (premium quality) 9-10 mm thick with highlighter tile (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in dados / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4, including dismantling of old tile, complete all as specified and directed. |
| 77 | M&L for providing mirror polished kota stone slab flooring 20-22 mm thck over and including 20 mm thick screed in Cement morter1:3 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing including dismantling of old kota stone slab of any type, complete all as specified and directed. |
| 78 | M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:3 after dismantling old unserviceable of skirting, complete all as specified and directed. |
| 79 | M&L for non-skid coloured (light shade) ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:3) including dismantling of existing tile, complete all as specfied and directed. |
| 80 | M&L for coloured glazed ceramic tiles with highlighter tile in between vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick cement plaster in CM (1:3), including dismantling of existing tile, complete all as specified and directed. |
| 81 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 82 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as speified and as directed |
| 83 | M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed. |
| 84 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed. |
| 85 | All as per Item No 84.00 here-in-before but except stone. Note: Stone retrieved from item No 81.00 will be re-used. |
| 86 | M&L for rendering 20mm thick in cement mortar 1:4 on stone surfaces of walls any typeand any height finished even and smooth without using extra cement, complete all as specified and directed. |
| 87 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 88 | M&L for rendering 15 mm thick on fair faces of brick, stone or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed. |
| 89 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a one coat primer, complete all as specified and directed. |
| 90 | M&L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion, complete all as specified and directed. |
| 91 | M&L for 3 mm thick wall care putty on wall, complete all as specified and directed. |
| 92 | M&L for rendering 5 mm thick in cement mortar 1:4 with water proofing compound @ 2% by weight of cement over 10mm thick in CM 1:6 on external surfaces of walls of block masonry finished even & smooth without using extra cement, including wiremesh wherever required and rendering height up to four (04) storey building, complete all as specified and directed.Note: The rate to be included cost of integral water proofing compound. |
| 93 | M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof paint of apex ultima (multi colour pattern as approved by GE) of over and including a coat of primer, complete all as specified and directed. |
| 94 | M&L for complete removal of existing treatment on old plastered wall/roof surfaces including cornices and chajjas etc and applying two coats of exterior weather coat paint of Apex Ultima of Asian or equivalent make (multi colour pattern as approved by GE), complete all as specified and directed. |
| 95 | M&L for preparation of old decorated plastered surface in Ceiling etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy oil and greasy spots and applying one coat of lime white wash on wall/ceiling, complete all as specified and directed. |
| 96 | M&L for 75 mm thick cement concrete 1:3:6 type C2, using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) including demolition of old concrete, complete all as specified and directed. |
| 97 | S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at wall / ceiling, including 5mm thick PVC sheet fillet of width 35mm for wall/ceiling panelling inclusive of fixing on walls to make PVC frames complete per standard specification after dismantling of old unserviceble PVC lining of any type, complete all as specified and directed. |
| 98 | S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per instructions including dismantling of existing board and making good the disturbed surface,complete all as specified and directed. |
| 99 | M&L for water proofing treatment to sunken portion (floor and wall) of WCs, bathroom as per following specification:-(a) Complete removal of existing filling and treatment over RCC slab and making a slope of 1:8 in and including PCC (1:2:4) type B-0 with minimum thickness 30mm using 12.5mm graded stone aggregate and providing all wall and floor joints with coved fillet in PCC (1:2:4), having a radius of 70mm.(b) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours.(c) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours.(d) Sealing of joint of Trap/WC/Soil pipes with sealing compound of MC Bouchemie/Roofex/Forre/Choksy/Dr Beck & Coty/FOSROC. |
| 100 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, ends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 101 | S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints in eaves gutters, with all fittings such as elbow, Equal Tee, coupling, 'Y' Tee etc, including MS clamp and holding arrangement for MS steel, complete all as specified and directed. |
| 102 | M&L for reinforcement cement concrete nominal mix type B1 1:2:4 (using 20 mm graded stone aggregate) in slab for cooking plate form, supported on wall, beam and column in floors, roofs, landing, balconies, canopies, Chajjas etc including demolition of RCC, complete all as specified and directed. |
| 103 | S&F mild steel TMT bars above 10mm dia cut to length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip, complete all as specified and directed. |
| 104 | Form work to soffits of suspended slabs such as roof slab, floor slab, landing and similar work: not exceeding 200 mm thick (Horizontial or sloping), complete all as specified and directed. |
| 105 | Form work to edge of concrete flat,treads, breaks in floors, window sill opening in concrete wall and similar work exceeding 5 cm wide and not exceeding 10cm wide, complete all as specified and directed. |
| 106 | Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement.(b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried.(c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coatNote:- (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed. |
| 107 | Sch 'A' Part-I (E/M works)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surface of walls, floor or ceiling etc to match the existing specification, complete all as specified and directed. |
| 108 | M&L for point wiring for one light point/fan point controlled by one way switch with 1.5 sqmm (nominal area) single core FRLS, PVC insulated 1100v, grade multi strand unsheathed copper conductor unsheathed in and casing caping medium grade of 25mm width complete with all accessories including PVC box ISI marked for mounting of switches, sockets, fan regulator and 1.5sqmm (nominal area) single core FRLS, PVC insulated 1100v grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.Note: Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring shall be followed as Red/Yellow/Blue for phase, black for neutral and green for earth. |
| 109 | All as per Ser item No.108.00 here-in-before but for 3 pin 6Amp socket outlet, 5 Amps switch on same board. |
| 110 | All as per Ser item No.108.00 here-in-before but for 3 pin 6Amp socket outlet, 6 Amps switch on independent board. |
| 111 | All as per Ser item No. 108.00 here-in-before but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthing lead. |
| 112 | S&F switch piano flush type 6 Amps SP one way 230 volts, complete all as specified and directed. |
| 113 | S&F bell push type single pole, one way 6 Amps 240 volts, complete all as specified and directed. |
| 114 | S&F socket outlet 2 in 1, 6 Amps, 3 Pin, flush type, 230 volts, complete all as specified and directed. |
| 115 | S&F switch socket outlet combination 2 in 1, flush type, single pole, one way, 5/15 Amps, 230 volts, complete all as specified and directed. |
| 116 | S&F modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically, complete all as specified and directed. |
| 117 | S&F in replacement call bell AC, 240 volts, single pole, ding-dong sound type, complete all as specified and directed. |
| 118 | M&L for point wiring with 1.5sqmm single core PVC insulated, unsheathed, 1100volt grade copper multistranded conductor (FRLS) drawn through in and including PVC casing caping (minimum 25mm in width), with the fittings such as tee, corners, overlapping connectors, etc fixed over walls, ceiling, floors etc also including PVC insulated unsheathed, multi stranded copper earth continuity conductor 1.5sqmm cable (FRLS) (Green), connected to common earth dolly and also providing modular metal flush boxes with modular white cover plate and frame of module suitable for mounting modular switch, socket, fan regulators etc with necessary screws for one light point/ fan point. bell point controlled by one switch, complete all as specifed and directed. |
| 119 | All as per Ser item No.118.00 here-in-before but for 3 pin 5Amp socket outlet, 5 Amps switch on same board. |
| 120 | All as per Ser item No.118.00 here-in-before but for 3 pin 6Amp socket outlet, 6 Amps switch on independent board. |
| 121 | All as per Ser item No. 118.00 here-in-before but for one 3 pin 16 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthing lead. |
| 122 | S&F modular type switch piano, 1 module, single pole one way 6Amp, complete all as specified and directed. |
| 123 | S&F modular type switch piano, 1 module, single pole one way 16Amp, complete all as specified and directed. |
| 124 | S&F modular type socket 2/3 pin, 2 module, 6A, ISI marked, 230 volts, complete all as specified and directed. |
| 125 | S&F modular type socket outlet 6/16A, 6 pin, 2 module, ISI marked, 230 Volts, complete all as specified and directed. |
| 126 | S&F modular type bell switch 6Amp, 1 module, complete all as specified and directed. |
| 127 | S&F modular type fan regulator electronic, hum free suitable to control speed of fan from 0 to 100% and connecting electrically, complete all as specified and directed. |
| 128 | S&F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm, complete all as specified and directed. |
| 129 | S&F Lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/ angular/ pendent fittings including LED Lamp 9/10 watt, complete all as specified and directed. |
| 130 | S&F in replacement for retrofit inverted based LED bulb 9 watt, 240volt, 50Hz, suitable for housing in pendent/ batten/ angular holder, complete all as specified and directed. |
| 131 | S&F in replacement inverter based LED Tube light fitting, 1x 20 watts, Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable as required at site, complete all as specified and directed. |
| 132 | S&F in replacement LED Tube light fitting, 1x 20 watts, 220volt, PVC batton complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable and necessary fixing arrangement at any height, complete all as specified and directed. |
| 133 | S&F in replacement decorative wall light suitable for 9watt LED lamp B22 base, co-extruded polycarbonate body, environmental friendly, energy efficiency ready to use pack complete prewired and connecting electrically as required at site, complete all as specified and directed. |
| 134 | S&F in replacement high efficacy 2 x 2 feet recess mounting LED flat panel light fittings 40watt, LED 3000K-6000K edge, lit luminaire as reqired on site and complete for low ceiling applications complete with all accessories pre-wired and incluidng connecting up with twin core twisted flexible copper conductor calbe with suitable size, complete all as specified and directed.Note:- Material required such as for safety harness, ladder and T&P etc shall be provided by the contractor without any extra cost. |
| 135 | S&F in replacement for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 9 to 18 watt 6000k inbuilt LED Luminaire comprising of high brightness LEDs, IP-54 protection including connecting electrically using PVC insulated over all sheathed with flexible copper conductor, complete all as specified and directed. |
| 136 | S&F in replacement LED Tube light fitting, complete with 9/10watt, 2 feet, 220volt, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75sqmm and necessary fixing arrangement at any height, complete all as specified and directed. |
| 137 | S&F in replacement LED building street light fitting, complete with 30watt, 220volt, AC outddor type with high pressure die cast aluminium hosing and heat resistant complete with driver, bracket etc including connection, complete all as specified and directed. |
| 138 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground (earth pit to a depth not less than 2.25 mtr below ground level) with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, connecting to the GI wire 4.0mm dia by means of belts, nuts, check nut and washer of GI and steel wire protected by provision of GI pipe 15mm bore light grade including provision of concrete pit made from PCC (1:2:4) type B1 (using 20 mm grade stone aggregates ) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 Nos and with 6mm MS bar handle made to shape, GI medium grade 20mm bore pipe ofr watering perforated at bottom 1.75mtr long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/ dense soil, returning filling in including ramming and removal of surplus soil to a disance not exc 50mtr, all as per electrical plate No 5 of SSR Part-I, connected to earth test point including testing on completion, complete all as specified and directed.Note: Earth strip and protection pipe upto board is included in the rate quoted). |
| 139 | M&L for sub main wiring complete with 2 run of 10sqmm, single core, copper conductor cable 1100volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC conduit of size 25mm width or above as required at site and accessories such as tee, corners, overlaping connector etc of suitable sixe fixed on surface of walls/ roofs/ ceiling and including 01 run of 10sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colur as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items complete all as specified and directed.Note: 02 run of 10sqmm single core copper conductor cable and 01 run of 10 sqmm single core copper conductor and 01 run of PVC conduit shall be measured as one unit and also colour coding of wiring shall be followed as red/ yellow/ blue for phase, black for neutral and green for earth. |
| 140 | M&L for sub main wiring complete with 2 run of 6sqmm, single core, copper conductor cable 1100volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC conduit of size 25mm width or above as required at site and accessories such as tee, corners, overlaping connector etc of suitable sixe fixed on surface of walls/ roofs/ ceiling and including 01 run of 6sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colur as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items complete all as specified and directed.Note: 02 run of 6sqmm single core copper conductor cable and 01 run of 6sqmm single core copper conductor and 01 run of PVC conduit shall be measured as one unit and also colour coding of wiring shall be followed as red/ yellow/ blue for phase, black for neutral and green for earth. |
| 141 | M&L for sub main wiring complete with 2 run of 4sqmm, single core, copper conductor cable 1100volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC conduit of size 25mm width or above as required at site and accessories such as tee, corners, overlaping connector etc of suitable sixe fixed on surface of walls/ roofs/ ceiling and including 01 run of 4sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colur as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items complete all as specified and directed.Note: 02 run of 4sqmm single core copper conductor cable and 01 run of 4sqmm single core copper conductor and 01 run of PVC conduit shall be measured as one unit and also colour coding of wiring shall be followed as red/ yellow/ blue for phase, black for neutral and green for earth. |
| 142 | M&L for sheet metal enclosure MCB distribution board, double door TPN with IP-42 protection single phase 415 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete, including removing of old/unsv, complete all as specified and directed.Note:- MCBs shall be measured separately. |
| 143 | S&F in replacement of factory made sheet metal enclosure MCB DB, 415 volts, AC TPN vertical distribution board 12 way painted with epoxy based powder coated suitable for mounting MCCB as incomer of rating upto 100Amps, FP and MCB SP/TP as outgoing and complete including taking down old unserviceable DBs and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.Note: MCCBs & MCBs shall be measured & paid separately. |
| 144 | S&F in replacement of sheet metal enclosure MCB DB, SPN 240 volts 8 way with IP-43 IK-09 protection double door 200A complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specificaiton, complete all as specified and directed.Note: MCBs shall be measured separately. |
| 145 | S&F in replacement of sheet metal enclosure VTPN distribution Board, DB, SPN 240 volts 8 way with IP-43 IK-09 protection, including suitable size copper bus bar and neutral link, fixed flush in wall for fixing MCCB and incommer capacity 100Amps and SPN as outgoing and making good distributed wall surfaces to match with existing specification, complete all as specified and directed. |
| 146 | S&F in replacement of sheet metal enclosure MCB DB, SPN 240 volts 12 way with IP-43 IK-09 protection double door 200A complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.Note: MCCBs & MCBs shall be measured & paid separately. |
| 147 | M&L for MCB TP 415 volts any rating upto 25 to 63 Amps, with rupturing capacity 10 KA, 'C' curve of current carrying capacity in the DB, complete with connecting and testing including providing thimble for out going cables,including removing old/unsv, complete all as specified and directed. |
| 148 | S & F in replacement miniature circuit breaker (MCB) SP, 6 to 32 Amp, 240V, 10KA 'B' curve in the DB complete with connection testing and commissioning, complete all as specified and directed. |
| 149 | S & F in replacement miniature circuit breaker (MCB) SPN, 6 to 32 Amp, 240V, 10KA 'B' curve in the DB complete with connection testing and commissioning, complete all as specified and directed. |
| 150 | S & F in replacement MCCB FP, 415 volt, any rating from 63Amps with rupturing capacity 16KA, including providing thimble for outgoing cable, complete all as specified and directed. |
| 151 | S&F in replacement TPN enclosure with and including 2 pin and earth plug and socket complete, also with and including one triple pole, MCB 32Amps, 10KA, 415 volt, complete all as specified and directed. |
| 152 | S&F in replacement service cable of size 10sqmm, 2 core 1100volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed. |
| 153 | S&F in replacement service cable of size 16sqmm, 2 core 1100volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed. |
| 154 | S&F in replacement LED driver suitable for LED light fitting from 24 to 40watt, including removing and refixing the fitting after servicing and connecting electrically using cord PVC insulated overall sheathed flexible copper conductor cable, complete all as specified and directed. |
| 155 | Supply only PVC tape 20mm in width and 5mtr in length, complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender