Tender For Special Repair To P-65, P-66, P-67 And Chain Link Fencing Around Bldg No P-90, P-91 At Shaurya Vihar installation Utkrosh And Provn Of Pvc Chain Link Fencing In Bldg No P-312 & P-313 At Srinagar Colony Under Ge Minniebay, Sri Vijaya Puram
Tender Value
43 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To P-65, P-66, P-67 And Chain Link Fencing Around Bldg No P-90, P-91 At Shaurya Vihar installation Utkrosh And Provn Of Pvc Chain Link Fencing In Bldg No P-312 & P-313 At Srinagar Colony Under Ge Minniebay, Sri Vijaya Puram (8819/E8)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jul-2026 | CORRIGENDUM | Date | 01-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or PCC block masonry wall in any description complete all as directed. |
| 2 | M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth complete all as specified and as directed. |
| 3 | M&L for rendering 15mm thick in two layers of first layer 10mm thick in CM (1:6) and second layer 5mm thick rendering in CM (1:4) using water proofing compound on brick masonry or stone block masonry or concrete surfaces complete all as specified and as directed. Note:- WPC will be paid separatley |
| 4 | M&L for rendering 5mm thick ceiling plaster in CM (1:3) on concrete surfaces finished even & smooth complete all as specified and as directed. |
| 5 | Supply only water proofing compound conforming to IS-2645-1975 complete all as directed. |
| 6 | Demolition of Pecast concrete articles and precast concrete block walling any description any position complete all as specified and as directed. |
| 7 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed. |
| 8 | M&L precast cement concrete block masonry with solid block n.exc 10cm thick and set in CM 1:4 complete all as specified and directed. Note:- PCC block masonry half brick thick |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | M&L for vitrified coloured ceramic tiles 10 mm thick (Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and directed. |
| 11 | All as per item No 10 above but on dado / skirting over 10mm thick backing coat in CM (1:4). |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 13 | M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. etc., complete all as specified and as directed. Note:- Considered for Railing on balcony /staircase portion at any postition |
| 14 | Taking down existing chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame complete all as directed. |
| 15 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately |
| 16 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. Note: stainless steel butt hinges and necessary S S screws incl in this item |
| 17 | S&F for 125 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 etc., complete all as specified and as directed. |
| 18 | S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed etc., complete all as specified and as directed. |
| 19 | S&F for 300mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc., complete all as specified and as directed. |
| 20 | M&L preparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Tractor uno), Berger (Bison Emulsion), Nerolac (beauty smooth), Shalimar Paints (No.1 Silk). |
| 21 | M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additives coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). |
| 22 | M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). |
| 23 | M&L for complete removal of old distempered surfaces and applying wall care putty 2 to 3 mm thick on walls surfaces in two layers by rubbing with sand paper to achieve smooth surfaces complete all as directed. |
| 24 | M&L for preparation of old plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk) |
| 25 | M & L for preparation of old plastered surfaces of ceiling and applying single coat of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk) |
| 26 | Dismantling , Plain or corrugated steel sheeting any gauge thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 27 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed. |
| 28 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 29 | S & F in repairs Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc and similar work complete all as specified and directed. |
| 30 | Dismantling wrought iron or mild steelwork of any description not otherwise provided for complete all as specified and as directed. |
| 31 | S& F in repairs for tubular MS Pipes as in trusses / Rolled sections, cross beam , hip and jack rafters , vertical posts purlins where connected to common rafters fixed with angle cleats or connecting plates any similar work including welding, and all necessery works complete all as specified conforming to grade of steel Fe-410- (Gde- E-250) quality- B. Note : Height of the bldg upto G+3 storey including necessary safety arrangements |
| 32 | M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of (grade of steel Fe-410- (Gde- E-250) quality- B ) completely all as specified and as directed. |
| 33 | S & F Mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as specified and directed. |
| 34 | S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts, two way and three waystraps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 (R) complete all as specified and directed. |
| 35 | M&L for preparing new or previously untreated surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 36 | Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed. |
| 37 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 38 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion , embedded in concrete, brickwork or masory etc and making good disturbed ground all as directed. |
| 39 | Dismantling of Mild Steel Work of any description not otherwise provided for complete all as specified and as directed. |
| 40 | Dismantling fencing wire mesh any type complete all as directed. |
| 41 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed. |
| 42 | Excavation in trenches, n. exe 1.5 m wide and n.exc 1.5 in depth, for foundation, etc or to shafts, wells, cesepits, manholes, piers holes, ec, n.exc 10 sq.m on planand getting out in hard / dense soil complete all as specified and as directed. |
| 43 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soils complete all as specified and as directed. |
| 44 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5m complete all as specified and as directed |
| 45 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed. |
| 46 | S&F to fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 47 | S&F Framed work such as grills, gratings gates , etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 48 | M&L PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts complete all as specified.Note : MS rod,and MS bolts will be measured and paid seperately as supplied only |
| 49 | Supply only mild steel screw bolts n exc 12 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing complete all as specified and directed. |
| 50 | Supply only 10 mm dia Round bars for support to chain link fencing confirming to Fe-290 (Gde E-165) complete all as specified and as directed. |
| 51 | M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 52 | Material & Labour in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 53 | M&L for PCC solid blcok masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) complete all as specified and directed. |
| 54 | M&L rendering 15mm thick in concrete or brick surface in CM 1:4 even & smooth without using extra cement complete all as specified and as directed. |
| 55 | S&F for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed. Note:- Each line wire to be measured |
| 56 | M&L for applying two coats of cement based paint over a coat of chalk whitening on newly plastered surface of wall including preparation complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender