Tender For Repair/Maint/Improvement Of Various Types Of Pump Sets With Allied Works Incl Maintenance Of Swimming Pool, Distribution & Rising Mains At Af Stn Sirsa
Tender Value
20 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
4 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint/Improvement Of Various Types Of Pump Sets With Allied Works Incl Maintenance Of Swimming Pool, Distribution & Rising Mains At Af Stn Sirsa
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I (PUMP & MOTORS) |
| 2 | Taking down Electric/Induction motor 40 HP capacity, of any Make/Model from existing position, Shifting to workshop for the repair work, removing the burnt winding, cleaning rotor, stator, re-winding the motor with super enamelled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc and installing back to the original position, testing and commissioning on full load for 8 hrs continuous running complete all as specified & directed by Engr-in-Charge. NOTE : Bearing & Bush will be measured and paid separately under relevant items. |
| 3 | -ditto- but for motor of capacity 20 HP, 3 phase, AC, 415V |
| 4 | -ditto- but for motor of capacity 10 HP, 3 phase, AC, 415V |
| 5 | -ditto- but for motor of capacity 1 to 2 HP, 1 phase, AC, 220V |
| 6 | S&F in repairs TC 15 rubber Coupling including dismantling of old unserviceable from shaft complete all as specified and directed. |
| 7 | M&L for Rewinding Submersible Motor 15 HP, 3 phase, AC, 415V with PVC insulated Copper wire of same Gauge High Class Insulating materials of the existing Size, Varnishing, Heating, etc., for the following capacities of Motor all as specified & directed. NOTE : Bearing & Bush will be measured and paid separately under relevant items. |
| 8 | -ditto- but for submersible motor of capacity 20 HP, 3 phase, AC, 415V |
| 9 | -ditto- but for submersible motor of capacity 25 HP, 3 phase, AC, 415V |
| 10 | Taking down Unserviceable Centrifugal/ Mono Block/ Vertical High pressure Pump Set any type & any Model 7.5/10 HP by disconnecting from Motor, Suction and Delivery Line for carrying out repairs at Workshop by replacing Defective/ unserviceable Parts including Greasing replacement of Packing Sheet, Gland, Stud, Bearing, Cover Sheet & Lath Work of Impeller Shaft, etc. including transportation and Testing & Commissioning after replacement of parts, complete all as specified and directed. NOTE : Bearing & Bush will be measured and paid separately under relevant items. |
| 11 | -ditto- but for pump of capacity 1 to 2 HP, 1 phase, AC, 220V |
| 12 | Supply only Ball Bearing (as approved) suitable for Pump Set 7.5/10 HP, complete all as specified and directed. |
| 13 | Supply only Ball Bearing (as approved) suitable for Pump Set 1-2 HP, complete all as specified and directed. |
| 14 | S&F in repairs Gun Metal Bush (as approved) suitable for Pump Set 7.5-10 HP, complete all as specified and directed. |
| 15 | Taking down Unserviceable Centrifugal Pump Set 20 HP by disconnecting from Motor, Suction and Delivery Line for carrying out repairs at Workshop by replacing following Defective Parts including Greasing replacement of Packing Sheet, Gland, Stud, Bearing, Cover Sheet & Lath Work of Impeller Shaft, etc. including transportation and Testing & Commissioning after replacement of parts, complete all as specified and directed.NOTE : New Spare Parts will be Measured and Paid separately. |
| 16 | -ditto- but for centrifugal Pump Set of capacity 40 HP, 3 phase, AC, 415V |
| 17 | Supply only Ball Bearing (as approved) suitable for Centrifugal Pump Set 20 HP, complete all as specified and directed. |
| 18 | Supply only Gun Metal Bush (as approved) suitable for Centrifugal Pump Set 20 HP, complete all as specified and directed. |
| 19 | Supply only Ball Bearing suitable for Centrifugal Pump Set 40 HP, complete all as specified and directed. |
| 20 | Supply Gun Metal Bush suitable for Centrifugal Pump Set 40 HP, complete all as specified and directed. |
| 21 | Supply only Gland Packing suitable 10mm complete all as specified and directed. |
| 22 | Repair/Overhauling of Submersible Pump Set 15/20 HP including replacement of Unserviceable Parts as required, complete all as specified and directed.NOTE : Bearing, Bush & Impeller will be measured and paid separately under relevant items. |
| 23 | -ditto- but for Submersibe Pump Set of capacity 25 HP, 3 phase, AC, 220V |
| 24 | Supply only SS Impeller suitable for Submersible Pump Set 20 HP, complete all as specified and directed. |
| 25 | Supply only Stainless Steel Bush suitable for Submersible Pump Set 20 HP, complete all as specified and directed. |
| 26 | Supply only Thrust Bearing suitable for Submersible Pump Set 20 HP, complete all as specified and directed. |
| 27 | Supply only SS Impeller suitable for Submersible Pump Set 25 HP, complete all as specified and directed. |
| 28 | Supply only Stainless Steel Bush suitable for Submersible Pump Set 25 HP, complete all as specified and directed. |
| 29 | Supply only Thrust Bearing suitable for Submersible Pump Set 25 HP, complete all as specified and directed. |
| 30 | Supply only shaft of motor suitable for submersible pump set motor of 25 HP complete all as specfied and directed. |
| 31 | Taking down Unserviceable Pump Set, 1 to 2 HP by disconnecting from Motor, Suction and Delivery Line for carrying out repairs at Workshop by replacing Defective Parts viz Bearing/bush, Impeller, Capacitor, Water Seal, Washers & Lath Work of Impeller Shaft etc. complete all as specified and directed. NOTE : Cost of new bearing, bush, Seal, Washers, Impeller, etc. shall deem to be included in the Quoted Unit Rate. |
| 32 | S&F in repairs Gun metal Air release valve suitable for any type Monobloc/Coupled pump set complete all as specified and directed. |
| 33 | M&L for Preparing Old Painted/treated Surfaces of Pump Sets and Motors of any description including cleaning of Grease/Oil Spots, etc. from the Pump Sets and Motors and applying Two Coats of Synthetic Enamel Paint and re-writing SM No. and MES No. on Pump Sets and Motors of suitable size, complete all as specified and directed. |
| 34 | Taking out Pumping Set for repair from Bore Well by dismantling Suction/ Delivery Column Pipe 50mm to 150mm dia and Lowering the Column Pipe after repairing the Pump including replacement of Gasket Set, worn out/ damaged Nuts and Bolts of required size carefully without causing any damage to the Pumping Set, Submersible Cable, complete all as specified and directed. NOTE : Job for taking out the Pumping Set consisting a Set of Pump & Motor shall be Paid for ONE Unit. |
| 35 | M&L for Rewinding Submersible Motor, non clog, vertical type up to 1.5 HP, 3 phase, AC, 415V with PVC insulated Copper wire of same Gauge High Class Insulating Materials of the existing Size, Varnishing, Heating, etc. complete all as specified & directed. NOTE :- Cost of taking out Pump Set for repair from UG Sump by dismantling Delivery Pipe and refixing after repairing of Pump to be included in the Quoted Unit Rate. |
| 36 | -ditto- but for Submersible Motor of capacity 3 HP, 3 phase, AC, 415V |
| 37 | Repair/Overhauling of Submersible Pump Set, non clog, vertical type 2 to 3 HP including replacement of Unserviceable Parts as required, complete all as specified and directed.NOTE :- Cost of taking out Pumping Set for repair from UG Sump by dismantling Delivery Pipe and refixing after repairing the Pump to be included in the Quoted Unit Rate. |
| 38 | Supply only SS Impeller suitable for Submersible Pump Set up to 3 HP, complete all as specified and directed. |
| 39 | Supply only Stainless Steel Bush suitable for Submersible Pump Set 3 HP, complete all as specified and directed. |
| 40 | Supply only Bearing suitable for Submersible Pump Set 3 HP, complete all as specified and directed. |
| 41 | Repair/Overhauling of Submersible Pump Set, non clog, vertical type 4 HP including replacement of Unserviceable Parts as required, complete all as specified and directed.NOTE :- Cost of taking out Pumping Set for repair from UG Sump by dismantling Delivery Pipe and refixing after repairing the Pump to be included in the Quoted Unit Rate. |
| 42 | Supply only SS Impeller suitable for Submersible Pump Set 4 HP, complete |
| 43 | Supply only Stainless Steel Bush suitable for Submersible Pump Set 4 HP, complete |
| 44 | Supply only Bearing suitable for Submersible Pump Set 4 HP, complete |
| 45 | SCHEDULE 'A' PART-II (DEVELOPMENT OF BOREWELL) Please Enable Macros to View BoQ information |
| 46 | SCHEDULE 'A' PART-II (DEVELOPMENT OF BOREWELL) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender