Tender For Special Repair Of Motor Cycle Garage, Light Vehicle Garage At Mt Section installation Utkrosh And Footpath And Drain From Atc To New Cg Link installation Utkrosh Under Ge Minniebay, Sri Vijaya Puram (8817/E8)
Tender Value
38.50 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
19 days left
EMD
77000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Motor Cycle Garage, Light Vehicle Garage At Mt Section installation Utkrosh And Footpath And Drain From Atc To New Cg Link installation Utkrosh Under Ge Minniebay, Sri Vijaya Puram (8817/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or PCC block masonry wall in any description complete all as directed. |
| 2 | M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth complete all as specified and as directed. |
| 3 | M&L for rendering 15mm thick in two layers of first layer 10mm thick in CM (1:6) and second layer 5mm thick rendering in CM (1:4) using water proofing compound (WPC will be paid separatley) on brick masonry or stone block masonry or concrete surfaces complete all as specified and directed. |
| 4 | Supply only water proofing compound conforming to IS-2645-1975 complete all as directed. |
| 5 | Demolition of Pecast concrete articles and precast concrete block walling any description any position complete all as specified and directed. |
| 6 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 8 | M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. etc., complete all as specified and as directed. Note : Considered for Railing on balcony /staircase portion at any postition |
| 9 | M&L preparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Tractor uno), Berger (Bison Emulsion), Nerolac (beauty smooth), Shalimar Paints (No.1 Silk). |
| 10 | M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additives coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). |
| 11 | M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). |
| 12 | M&L for complete removal of old distempered surfaces and applying wall care putty 2 to 3 mm thick on walls surfaces in two layers by rubbing with sand paper to achieve smooth surfaces complete all as specified and directed. |
| 13 | M&L for preparation of old plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion distemper complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (Beauty smooth), Shalimar (No.1 silk) |
| 14 | Dismantling, Plain or corrugated steel sheeting any gauge thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 15 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ150 as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed. |
| 16 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ150 as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 17 | S & F in repairs Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed. |
| 18 | S& F in repairs for tubular MS Pipes as in trusses / Rolled sections, cross beam , hip and jack rafters , vertical posts purlins where connected to common rafters fixed with angle cleats or connecting plates any similar work including welding, and all necessery works complete all as specified conforming to grade of steel Fe-410- (Gde- E-250) quality- B. |
| 19 | M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of (grade of steel Fe-410- (Gde- E-250) quality- B ) completely all as specified and as directed. |
| 20 | S & F Mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as specified and as directed. |
| 21 | S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts, two way and three waystraps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 (R) complete all as specified and as directed. |
| 22 | M&L for preparing new or previously untreated surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 23 | Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed. |
| 24 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 25 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) etc., complete all as specified and as directed. |
| 26 | M&L Hardcore with brocken stone or boulders of gauge n.exc 63 mm , deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 27 | M& L PCC 100mm (1:4:8) Type D2 (using 40mm graded aggregte) in foundations, filling and mass concrete complete all as specified and directed. |
| 28 | M&L for 50 mm thick Sand filling under floors as in sand cushioning for paver tiles including watering and consolidation complete all as specified and as directed. |
| 29 | M& L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 30 | M&L 75 mm thick PCC(1:4:8) Type D2 (using 40mm graded aggregte) in sub floors , sub bases , floors and pavings etc complete all as specified and directed. |
| 31 | M&L for PCC(1:2:4) type B1 using 20 mm stone graded aggregate as in coping at sides of paver blocks complete all as specified and directed. |
| 32 | S&F in stainless steel tubing of any diameter or square or rectangular in shape, thickness of wall not more than 16 gauge of grade AISI-316 type Austhetic anticorrssive in nature as in framed work / Posts / fencing work / railings / grills / designer work,purposily made doom and base welded with tubing where required including cutting, bending, welding, grinding, buffing and bright polishing the welded joints and adjacent areas and fixing in any type of location complete all as speccified and as directed. |
| 33 | Demolition of Precast Concrete work/ precast concreteblock built in cement mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 34 | M&L Precast cement concrete block masonry with solid block, exc 10 cm in width in PCC type C-1 , (1:3:6) (using 20 mm graded stone aggregate) set in CM (1:6) complete all as specified and directed. |
| 35 | M&L for rendering 15mm thick plaster in CM (1:4) on brick/PCC block wall or concrete surfaces finished even & smooth (without using extra cement) complete all as specified and as directed. |
| 36 | S&F in Reinforced drain pipe 300mm dia Class NP-3 laid and jointed complete with collors complete all as specified and directed. |
| 37 | M&L Concrete bed to drain pipes 300 mm bore including packing under and haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6, Type C2 complete all as specified and as directed. |
| 38 | S&F 150 mm bore PVC (SWR) pipes single socketed in any length fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls or as in weep holes complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender