Tender For Construction Of Office Building, Residential Quarters (T-Iv-2, T-Iii-4 & T-Ii-7) And Retaining Wall At Bip Yingkiong Under Sib Itanagar
Tender Value
6.29 Crore
Estimated cost
Bid Submission
18 Jul 2026
4 days left
EMD
6.29 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Upper Siang → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Building, Residential Quarters (T-Iv-2, T-Iii-4 & T-Ii-7) And Retaining Wall At Bip Yingkiong Under Sib Itanagar
BOQ
| Sl. No. | Item Description |
| 1 | TYPE - IV - 2 unitsEarth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 2 | Providing and laying in foundations and plinth cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. |
| 3 | Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 4 | Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete. |
| 5 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 6 | c) Column, pillars, posts and struts etc. |
| 7 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 8 | e) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 9 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) 1 : 1.5 : 3(1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 10 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) 1 : 1.5 :3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 11 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a)1 :1.5 :3(1 cement : 1.5 coarse sand : 3stone aggregate 20 mm nominal size). |
| 12 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 13 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 14 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 15 | Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) blocks in cement mortar 1 : 3(1 cement : 3 fine sand)for percast cement block masonary in super structure above plinth upto floor two level. |
| 16 | Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level. |
| 17 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 18 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 35mm thick |
| 19 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I |
| 20 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 21 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 22 | Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. |
| 23 | Welding by gas plant |
| 24 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Total coated thickness 0.45mm Roofing Sheets |
| 25 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. (a) Total coated thickness 0.45mm Ridge |
| 26 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 27 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
| 28 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. |
| 29 | Extra for making chamfered edges of beading. |
| 30 | 12 mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 31 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 32 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone shingle 40 mm nominal size). |
| 33 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 34 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete. |
| 35 | Providing and fixing Aluminium sliding door bolts anodised transperent or dyed to requred colour or shade with nuts and scrows etc complete.a) 300 x 16 mm |
| 36 | Providing and fixing Aluminium tower bolts anodised or transperent or dyed to requred colour or shade with necessary screws etc complete.a) 250 x 10 mm |
| 37 | Providing and fixing Aluminium handels anodised or transperent or dyed to requred colour or shade with necessary screws etc complete.a) 100 mm |
| 38 | White washing with lime on new work (two or more coats) to give an even shade. |
| 39 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 40 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 41 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 42 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 43 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 44 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).f) 50 mm nominal bore |
| 45 | Providing and fixing brass bib cock of approved quality.b)15 mm nominal bore |
| 46 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.b) Orissa Pattern WC Pan |
| 47 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 48 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 49 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 50 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes |
| 51 | Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore |
| 52 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.c) 100 mm dia |
| 53 | Providing and fixing sand cast iron heel rest sanitary bend.c) 100 mm dia |
| 54 | Providing and fixing sand cast iron single equal plain junction of required degree.a) 100 x 100 x 100 mm |
| 55 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 56 | TYPE-III - 2 UNITS (GROUND FLOOR)Civil WorksEarth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m. |
| 57 | Providing and laying in foundations and plinth cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) excluding the cost of centering and shuttering.a) Foundation and plinth |
| 58 | Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 59 | Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete. |
| 60 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 61 | c) Column, pillars, posts and struts etc. |
| 62 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 63 | f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 64 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 65 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 66 | Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5 mm nominal size). |
| 67 | Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement. |
| 68 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 69 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 70 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 71 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 72 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 73 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 74 | 50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement. |
| 75 | Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth. |
| 76 | Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level. |
| 77 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 78 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 79 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 80 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 35mm thick |
| 81 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I |
| 82 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 83 | Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 84 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)(a) flaot glass panes of 4,00mm thickness |
| 85 | 12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls. |
| 86 | 15 mm cement plaster in 1:3 (1 cement :3 fine sand) cement mortor |
| 87 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :a) 25 mm thick |
| 88 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 89 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 90 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 91 | Providing and fixing Aluminium handles with necessary screws etc. complete.a) 125 mm |
| 92 | b) 100 mm |
| 93 | Providing and fixing Aluminium tower bolt( barrel type) with necessary screws etc. complete.a) 250x10 mm |
| 94 | Providing and fixing MS Hooks and Eyes.a) 300 x 16 mm |
| 95 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 96 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 Coarse sand:6 graded stone aggregate 20 mm nomina; size over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and considered and grouted with fine sand including finishing top smooth. |
| 97 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete. |
| 98 | White washing with lime on new work (two or more coats) to give an even shade. |
| 99 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 100 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 101 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 102 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 103 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 104 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 20 mm nominal bore |
| 105 | f) 50 mm nominal bore |
| 106 | Providing and fixing brass bib cock of approved quality.b)15 mm nominal bore |
| 107 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.b) Orissa Pattern WC Pan |
| 108 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 109 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 110 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 111 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes |
| 112 | Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore |
| 113 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.c) 100 mm dia |
| 114 | Providing and fixing sand cast iron heel rest sanitary bend.c) 100 mm dia |
| 115 | Providing and fixing sand cast iron single equal plain junction of required degree.a) 100 x 100 x 100 mm |
| 116 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 117 | TYPE- III - 2 UNITS (FIRST FLOOR)Civil Works Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 118 | Centring and shuttering including strutting, propping etc and removal of form work for :c) Column, pillars, posts and struts etc. |
| 119 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 120 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 121 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 122 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 123 | Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth. |
| 124 | Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level. |
| 125 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 126 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 127 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 128 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 35mm thick |
| 129 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I |
| 130 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 131 | Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 132 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)(a) flaot glass panes of 4,00mm thickness |
| 133 | 12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls. |
| 134 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :(a) 25 mm thick |
| 135 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 136 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 137 | 50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement. |
| 138 | Providing and fixing Aluminium handles with necessary screws etc. complete.a) 125 mm |
| 139 | b) 100 mm |
| 140 | Providing and fixing Aluminium tower bolt( barrel type) with necessary screws etc. complete.a) 250x10 mm |
| 141 | Providing and fixing MS Hooks and Eyes.a) 300 x 16 mm |
| 142 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 143 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 144 | Welding by gas plant |
| 145 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Total coated thickness 0.45mm Roofing Sheets |
| 146 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. (a) Total coated thickness 0.45mm Ridge |
| 147 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 148 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
| 149 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.b)Best local Approved quality Wood |
| 150 | Extra for making chamfered edges of beading. |
| 151 | White washing with lime on new work (two or more coats) to give an even shade. |
| 152 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 153 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 154 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 155 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 156 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 157 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 20 mm nominal bore |
| 158 | Providing and fixing brass bib cock of approved quality.b)15 mm nominal bore |
| 159 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.b) Orissa Pattern WC Pan |
| 160 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 161 | Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore |
| 162 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 163 | TYPE-II - 2 UNITS (GROUND FLOOR)Civil WorksEarth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m. |
| 164 | Providing and laying in foundations and plinth cement concrete 1:3:6(1 cement : 3 coarse sand :68 graded stone aggregate 20mm nominal size) excluding the cost of centering and shuttering.b) For walls |
| 165 | Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 166 | Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete. |
| 167 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 168 | c) Column, pillars, posts and struts etc. |
| 169 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 170 | f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 171 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 172 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 173 | Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5 mm nominal size). |
| 174 | Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement. |
| 175 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 176 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 177 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 178 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 179 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 180 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 181 | 50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement. |
| 182 | Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth. |
| 183 | Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level. |
| 184 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 185 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 186 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 187 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 35mm thick |
| 188 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I |
| 189 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 190 | Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 191 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)(a) flaot glass panes of 4,00mm thickness |
| 192 | 12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls. |
| 193 | 15 mm cement plaster in 1:3 (1 cement :3 fine sand) cement mortor |
| 194 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :a) 25 mm thick |
| 195 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 196 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 197 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 198 | Providing and fixing Aluminium handles with necessary screws etc. complete.a) 125 mm |
| 199 | b) 100 mm |
| 200 | Providing and fixing Aluminium tower bolt( barrel type) with necessary screws etc. complete.a) 250x10 mm |
| 201 | Providing and fixing MS Hooks and Eyes.a) 300 x 16 mm |
| 202 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 203 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 Coarse sand:6 graded stone aggregate 20 mm nomina; size over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and considered and grouted with fine sand including finishing top smooth. |
| 204 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete. |
| 205 | White washing with lime on new work (two or more coats) to give an even shade. |
| 206 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 207 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 208 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 209 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 210 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 211 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 20 mm nominal bore |
| 212 | f) 50 mm nominal bore |
| 213 | Providing and fixing brass bib cock of approved quality.b)15 mm nominal bore |
| 214 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.b) Orissa Pattern WC Pan |
| 215 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 216 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 217 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 218 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes |
| 219 | Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore |
| 220 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.c) 100 mm dia |
| 221 | Providing and fixing sand cast iron heel rest sanitary bend.c) 100 mm dia |
| 222 | Providing and fixing sand cast iron single equal plain junction of required degree.a) 100 x 100 x 100 mm |
| 223 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 224 | TYPE-II - 2 UNITS (FIRST FLOOR)Civil WorksReinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 225 | Centring and shuttering including strutting, propping etc and removal of form work for :c) Column, pillars, posts and struts etc. |
| 226 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 227 | f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 228 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 229 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 230 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 231 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 232 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 233 | 50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement. |
| 234 | Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth. |
| 235 | Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level. |
| 236 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 237 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 238 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 239 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 35mm thick |
| 240 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I |
| 241 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 242 | Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 243 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)(a) flaot glass panes of 4,00mm thickness |
| 244 | 12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls. |
| 245 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :a) 25 mm thick |
| 246 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 247 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 248 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 249 | Providing and fixing Aluminium handles with necessary screws etc. complete.a) 125 mm |
| 250 | b) 100 mm |
| 251 | Providing and fixing Aluminium tower bolt( barrel type) with necessary screws etc. complete.a) 250x10 mm |
| 252 | Providing and fixing MS Hooks and Eyes.a) 300 x 16 mm |
| 253 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 254 | White washing with lime on new work (two or more coats) to give an even shade. |
| 255 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 256 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 257 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 258 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 259 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 260 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 20 mm nominal bore |
| 261 | b) 50 mm nominal bore |
| 262 | Providing and fixing brass bib cock of approved quality.b)15 mm nominal bore |
| 263 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.b) Orissa Pattern WC Pan |
| 264 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 265 | Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore |
| 266 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 267 | TYPE-II - 2 UNITS (SECOND FLOOR)Civil Works Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 268 | c) Column, pillars, posts and struts etc. |
| 269 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 270 | f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 271 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 272 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 273 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 274 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 275 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 276 | 50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement. |
| 277 | Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth. |
| 278 | Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level. |
| 279 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 280 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 281 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 282 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 35mm thick |
| 283 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I |
| 284 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 285 | Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 286 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)(a) flaot glass panes of 4,00mm thickness |
| 287 | 12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls. |
| 288 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :(a) 25 mm thick |
| 289 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 290 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 291 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 292 | Providing and fixing Aluminium handles with necessary screws etc. complete.a) 125 mm |
| 293 | b) 100 mm |
| 294 | Providing and fixing Aluminium tower bolt( barrel type) with necessary screws etc. complete.a) 250x10 mm |
| 295 | Providing and fixing MS Hooks and Eyes.a) 300 x 16 mm |
| 296 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 297 | White washing with lime on new work (two or more coats) to give an even shade. |
| 298 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 299 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 300 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 301 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 302 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 303 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 20 mm nominal bore |
| 304 | a) 50 mm nominal bore |
| 305 | Providing and fixing brass bib cock of approved quality.b)15 mm nominal bore |
| 306 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.b) Orissa Pattern WC Pan |
| 307 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 308 | Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore |
| 309 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 310 | TYPE-II - SINGLE UNIT (THIRD FLOOR)Civil Works Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 311 | Centring and shuttering including strutting, propping etc and removal of form work for :c) Column, pillars, posts and struts etc. |
| 312 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 313 | f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 314 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 315 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 316 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 317 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 318 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size). |
| 319 | 50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement. |
| 320 | Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth. |
| 321 | Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level. |
| 322 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 323 | Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. |
| 324 | Welding by gas plant |
| 325 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Total coated thickness 0.45mm Roofing Sheets |
| 326 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. (a) Total coated thickness 0.45mm Ridge |
| 327 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 328 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
| 329 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. |
| 330 | Extra for making chamfered edges of beading. |
| 331 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 332 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 333 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 334 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 35mm thick |
| 335 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I |
| 336 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 337 | 12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls. |
| 338 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :a) 25 mm thick |
| 339 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 340 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 341 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 342 | Providing and fixing Aluminium handles with necessary screws etc. complete.a) 125 mm |
| 343 | b) 100 mm |
| 344 | Providing and fixing Aluminium tower bolt( barrel type) with necessary screws etc. complete.a) 250x10 mm |
| 345 | Providing and fixing MS Hooks and Eyes.a) 300 x 16 mm |
| 346 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 347 | White washing with lime on new work (two or more coats) to give an even shade. |
| 348 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 349 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 350 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 351 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for Wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 352 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 353 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 20 mm nominal bore |
| 354 | f) 50 mm nominal bore |
| 355 | Providing and fixing brass bib cock of approved quality.b)15 mm nominal bore |
| 356 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.b) Orissa Pattern WC Pan |
| 357 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 358 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 359 | OFFICE BUILDINGEarth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 360 | Providing and laying in foundations and plinth cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. |
| 361 | Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 362 | Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete. |
| 363 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 364 | c) Column, pillars, posts and struts etc. |
| 365 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 366 | e) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 367 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) 1 : 1.5 : 3(1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 368 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) 1 : 1.5 :3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 369 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a)1 :1.5 :3(1 cement : 1.5 coarse sand : 3stone aggregate 20 mm nominal size). |
| 370 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 371 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 372 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 373 | Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) blocks in cement mortar 1 : 3(1 cement : 3 fine sand)for percast cement block masonary in super structure above plinth upto floor two level. |
| 374 | Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level. |
| 375 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 376 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 35mm thick |
| 377 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I |
| 378 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 379 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 380 | Welding by gas plant |
| 381 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Total coated thickness 0.45mm Roofing Sheets |
| 382 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. (a) Total coated thickness 0.45mm Ridge |
| 383 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 384 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
| 385 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. |
| 386 | Extra for making chamfered edges of beading. |
| 387 | 12 mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 388 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 389 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone shingle 40 mm nominal size). |
| 390 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 391 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete. |
| 392 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 393 | Providing and fixing Aluminium tower bolts anodised or transperent or dyed to requred colour or shade with necessary screws etc complete.a) 250 x 10 mm |
| 394 | Providing and fixing Aluminium handels anodised or transperent or dyed to requred colour or shade with necessary screws etc complete.a) 100 mm |
| 395 | White washing with lime on new work (two or more coats) to give an even shade. |
| 396 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 397 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 398 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 399 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 400 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 401 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 20 mm nominal bore |
| 402 | f) 50 mm nominal bore |
| 403 | Providing and fixing brass bib cock of approved quality.b)15 mm nominal bore |
| 404 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.b) Orissa Pattern WC Pan |
| 405 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.a) One urinal basin with 5 Litres CI automatic flushing cister |
| 406 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 407 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 408 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 409 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes |
| 410 | Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore |
| 411 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.c) 100 mm dia |
| 412 | Providing and fixing sand cast iron heel rest sanitary bend.c) 100 mm dia |
| 413 | Providing and fixing sand cast iron single equal plain junction of required degree.a) 100 x 100 x 100 mm |
| 414 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 415 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work)(f) 50 mm nominal bore |
| 416 | (i) 100 mm nominal bore |
| 417 | SH- CC PavementPreparation of sub grade (Preparation of sub grade by excavating earth to an average depth of 22.50 cm, dressing to camber and consolidating with road roller, making good theundulations etc. and disposal of surplus earth, lead upto 50 m.) |
| 418 | Consolidation of sub-grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the sub grade |
| 419 | Plant Mix Method (Construction of granular sub base by provided close graded material,mixing in a mechanical mix plant at OMC,carriage of mixed material to work site,spreading in uniform layers with motor grade on prepared surface and compacting with vibratory power roller to achive the desire density complete as per clause 401)a)For Grading I Material |
| 420 | Cement Concrete PavementConstruction of unreinforced ,dowel jointed,plain cement concrete pavement over a prepared subbase with 43 grade cement @400 Kg per cum,coarse and fine aggregate conforming to IS 383 maximum size of coarse aggregate not exceeding 25mm mixed |
| 421 | C.C. DRAINExcavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling withapproved material.)I Ordinary soilA Manual Means(i) upto 3 m depth |
| 422 | Plain/Reinforced cement concrete in Open foundation complete as per drawing and technical specificationsA PCC Grade M15 |
| 423 | Plain/Reinforced cement concrete in Open foundation complete as per drawing and technical specificationsB PCC Grade M20 |
| 424 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall. |
| 425 | RCC R/Wall - 80.00 Mtr Length 4.00 Mtr HtExcavation for structures (Earth work in excavation of foundation of structures as per drawing and technically specification, including setting out, construction of shoing and bracing, removal of stumps and other deletenious matter, dressing of sides and bottom and backfilling with approved material) |
| 426 | PCC 1:3:6 in foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crusged stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.) |
| 427 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.RCC Grade M20 |
| 428 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and Technical Specifications |
| 429 | Providing and laying of Filter media with stone boulder to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. |
| 430 | Providing weep holes in Brick masonary/Plain/ Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC Pipe, extending through the full width of the structure with slope of 1V:20H towards drawing foce. Complete as per drawing and Technical specifications. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender