Tender For Parakena Padmapur_Road_Wbm-Iii,Sdbc And 900 Mm Dia special repair Hpc,600 Mm Dia special repair Hpc,1.000 To 3.450 At 1.300 Km And 1.500 Km
Tender Value
20.17 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
1 days left
EMD
20171
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Parakena Padmapur_Road_Wbm-Iii,Sdbc And 900 Mm Dia special repair Hpc,600 Mm Dia special repair Hpc,1.000 To 3.450 At 1.300 Km And 1.500 Km
BOQ
| Sl. No. | Item Description |
| 1 | Clearing & grubbing road land including uprooting rank vegetation , grass, bushes,shrubs, saplings & trees girth upto 300 mm, removal of stumps of such trees cut earlier & disposal of unserviceable materials by manual means & stacking of serviciable materials to be used or acutioned, upto a lead of 1000 m including removal & disposal of top organic soils not exceeding 150 mm in thickness as per technical specification clause 210 & as per direction of the Engineer-in-Charge. |
| 2 | Scarifying the existing bituminous road surface to a depth of 50mm (By mechanical means) and disposal of scarified materials within all lifts and lead upto 1000 metres etc.complete as per the specification and direction of the Engineer-in-charge. |
| 3 | Re-Working of Scarified bituminous Surface suitable after supplementing base materials with sand & compacting fnished surface as per Technical specification & as per Clause-601.8.3.2 of MoSRT&H Specification for road & Bridge Works(Latest Revision) |
| 4 | Construction of granular subbase by providing close gaded granular sub-base grading-III materials as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with retovator at OMC, and compacting with vibrator roller to achieve the desired density comlete as per clasue 401 of MOSRT & H speciciation for road & bridge works (4th revision) etc.complete as per the specification and direction of the Engineer-in-charge. |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with PRR 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of H.G stone screening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 404 of MoSRT&H specifications including cost, conveyance, royalty, taxes, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. WBM Gr.II(with Stone screening) |
| 6 | WBM Gr.III(with Stone screening) |
| 7 | Providing and applying primer coat with bitumen emulsion SSI on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H specifications including cost, conveyance, royalty, taxes, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. |
| 8 | Providing and applying tack coat using bitumen emulsion RS-I@ 0.30kg per sqm on the prepared bitumenous surface/granular base treated with primer/ granular base (not primed) cleaned surface including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge. |
| 9 | Providing and applying tack coat using bitumen emulsion RS-I@ 0.20kg per sqm on the prepared bitumenous surface/granular base treated with primer/ granular base (not primed) cleaned surface including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge. |
| 10 | Providing and laying semi dense graded bituminous concrete with batch type hot mix plant using crushed agreegates of specified grading , premixed with bituminous binder of 60/70 penetration grade of bitumen ,transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled ,vibratory and tandem rollers to achive the desired compaction as per clause 508 of MoSRT&H specification for the road and bridge works (4th Revision) . |
| 11 | Construction of embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site by mechanical means within a lead of 5 kms, spreading, grading to required slope & compacting to meet requirement of table 300-2 & clause 305 of MoSRT&H specifications forRoad & Bridge works (4th Revision) |
| 12 | Earthwork in excavation for foundation of structures in hard soil upto 3 m depth as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, and disposal up to a lead of 50m, dressing of sides and bottom and backfilling with excavated suitable materials and as per direction of Engineer-in-charge. |
| 13 | Filling in foundation and plinth with sand well watered and rammed including cost, conveyance, royalty, taxes of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. |
| 14 | Providing Plain cement concrete of M-15 grade with 40mm size H.G. chips & down graded of approved quality and from approved quarry including hoisting, lowering and laying concrete & ramming in layers not exceeding 0.15m thick watering and curring including cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 15 | Providing & laying NP3 hume pipes including cost of labour for laying hume pipes including cost, conveyance, royality, taxes, T&P & all other materials required for the work etc. complete as per specification and direction of the Engineer-in-Charge.1000mm Dia |
| 16 | 600mm Dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender