Tender For Estimate For Repair Of Quarters At Rest House Kokri.
Tender Value
7.76 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
7 days left
EMD
15535
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Moga → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Repair Of Quarters At Rest House Kokri.
BOQ
| Sl. No. | Item Description |
| 1 | Mud plaster on floor and roofs 25mm thick with gobri leeping including all materials on Floor & Roofs. As per CSR Item No 15.56 |
| 2 | Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing. |
| 3 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified |
| 4 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 5 | Cement concrete 1:3:6 with stone ballast or shingle mixing by manual means |
| 6 | Scraping - cement plaster |
| 7 | 12.5 mm thick cement plaster 1:4 |
| 8 | 20mm thick cement plaster 1:3 in two coat work |
| 9 | Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including disposal of rubish to the dumping ground within 50 m lead (excluding the cost of scraping of plaster and replastering). |
| 10 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position . Double Rebate (60mm x 150mm) |
| 11 | Wire gauge Hollock wood door shutter without springs housed in chowkhat. (35 mm thick) |
| 12 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts and screws etc.complete :300mm x 16mm.As per CSR Item No.17.49 a |
| 13 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. 35MM thick |
| 14 | Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete. (b) Iron helical spring |
| 15 | Providing & fixing 4\\" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 16 | Providing & fixing 6\\" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 17 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect. Glazing area above 0.09 sqm. 5.0mm thick Plate glass (INDIAN) |
| 18 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 19 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 20 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 21 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish |
| 22 | Distempering with Acrylic washable oil bound 331.23 sqm 26,170.48 distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 23 | Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm |
| 24 | Scraping -White wash and colour wash |
| 25 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). For shutter area above 0.50 sqm |
| 26 | Corrugated G.I. Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks 10mm dia, G.I. Limpot and bitumen washers complete excluding the cost of purling rafters and trusses |
| 27 | Providing and Fixing Galvanized Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge. |
| 28 | Providing and fixing 1st quality ceramic glazed wall tiles of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 29 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. |
| 30 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. (i) Tripple Layer Tanks , As per CSR Item No 30.97 A |
| 31 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect (C) G.I. tank nipple 25mm i/d , As per CSR Item No 30.98 (c) |
| 32 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. As per CSR Item No 30.80 |
| 33 | Providing and fixing in position automatic brass Ball Cock in tanks. Brass Ball Cock with rod and Plastic Ball , 25mm i/d , As per CSR Item No 30.96 B (iii) |
| 34 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. As per CSR Item No 30.20 |
| 35 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P.brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (ii) Size 550 mm x 400 mm x 815 mm |
| 36 | Providing and fixing in position Chinaware European type water closet P trap or Strap of approved make (to theapproval of the Engineer-in-charge) consisting of 10ltr. PVC flushing cistern ISI marked, PVC short bend 32mmdia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 37 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in charge:- (ii) Overall size 1.5sq.mm (Un-sheathed) .As per CSR Item No 34.09(ii) |
| 38 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. (d) C.P.brass 20mm concealed stop cock with flange |
| 39 | Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer in-charge ) complete in all respect. 20mm i/d |
| 40 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI markedwith the prior approval of Engineer-in_x0002_Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. (c) CPVC SDR 11 Pipe & fitting 25mm o/d |
| 41 | Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 42 | Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make including cutting, jointing, wastage. 110mm o/d SWR UPVC pipe line laid complete. As per CSR Item No 30.74 (iii) B (b) |
| 43 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc. (i) (a) Wiring fan point (Without fan box) |
| 44 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 45 | Wiring fan point with sheet metal fan box in PVC insulated copper conductor single core FLRS cable (I.S.I. marked) overall 1.5 sqmm 1100 volts Grade with Regulator complete |
| 46 | Wiring Light point in PVC insulated copper conductor single core FLRS cable (I.S.I. marked) overall 1.5 sqmm 1100 volts Grade complete |
| 47 | Wiring 3 Pin 6 Amp. Wall socket point in PVC insulated copper conductor single core FLRS cable (I.S.I. marked) overall 1.5 sqmm 1100 volts Grade complete |
| 48 | Wiring 3 Pin 16/20 Amp. power plug control point in PVC insulated copper conductor single core FLRS cable (I.S.I. marked) overall 1.5 sqmm 1100 volts Grade complete |
| 49 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 50 | Supply and erection of Ceiling Rose (Flush Piano type) switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. |
| 51 | Supply and erection of Bakelite Batten Holder (Large size) switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. |
| 52 | Supply and erection of 3 Pin Plug Top 6Amp. (ISI marked) (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. |
| 53 | Supply and erection of 3 Pin Plug Top 16Amp. (ISI marked) (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. |
| 54 | Supply and erection of Step type Fan Regulator Flush Piano type (Socket size) (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. |
| 55 | Supply and erection of 6/10amp. One Way Modular Switch (One Module) (Socket size) (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. |
| 56 | Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):- Powder Coated Concealed Metal Box with Brass Lugs Twelve Module |
| 57 | Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:- Modular Cover Frame Twelve Module |
| 58 | Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):- Powder Coated Concealed Metal Box with Brass Lugs Eight Module |
| 59 | Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:- Modular Cover Frame Eight Module |
| 60 | Earth work in excavation in foundations, trenches. |
| 61 | Cement concrete 1:4:8 with stone ballast 40mm gauge. |
| 62 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. |
| 63 | Extra for bitumen painting @0.69 kg per sqm |
| 64 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. |
| 65 | Bearing Plaster of 10 mm thick cement mortar 1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on top of walls when dry for bearing of R.C.C. slabs & beams. |
| 66 | Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels. |
| 67 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 68 | Reinforced cement concrete M-20 mechenically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 69 | Cold twisted deformed (Ribbed/Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008 for R.C.C. works, where not including in the complete rate of R.C.C. including bending and placing in position complete in all respect. |
| 70 | Embedding 100mm dia CI rain water non pressure ISI mark pipe in cement mortar during masonry work. |
| 71 | Providing ceiling fan 1200 mm. |
| 72 | Providing LED flood light 100 W |
| 73 | Providing LED tube light 22 W |
| 74 | Any other Item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender