Tender For Providing And Fixing New Motorized Operated Curtains For Stage And Also Providing & Fixing Partition Of Al Ac2 Frame With Milky Frosted Glass & Louvered Al Ac2 Panel With Al Ac2 Sliding Door (Partially Milky Glazed & Laouvered ) Near Side
Tender Value
2.36 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
6 days left
EMD
4722
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing New Motorized Operated Curtains For Stage And Also Providing & Fixing Partition Of Al Ac2 Frame With Milky Frosted Glass & Louvered Al Ac2 Panel With Al Ac2 Sliding Door (Partially Milky Glazed & Laouvered ) Near Side Of Stage Of Community Hall Of Amd Complex, Shillong.
BOQ
| Sl. No. | Item Description |
| 1 | Providing, supplying, fixing and stitching of new motorized curtains (1 No. motorized channel , 1 No. remote , 19 Rft. channel, 16 Rft. normal channel & 60 m curtains) for stage of community hall including taking out old existing curtains , rods, electric switch points & finished the wall surface as before, all cost of material, labour,carriage, taxes etc. complete, curtain's fabric quality & colour as per direction of Engineer-in-charge. |
| 2 | Providing & fixing partition of Al AC2 frame ( section size 60mm x 40mm & thickness 1.5 mm bronze anodized) with milky frosted Glass 5mm thick & Al AC2 louvered 82mm bronze anodized panel and partially milky glazed & louvered Al AC2 sliding door ( Al door frame size 82mm x 45mm & thickness 1.5 mm bronze anodized ) near side of stage of community hall of AMD Complex, Shillong including material, silicon, labour charges, fixing, carriage of materials, taxes etc. all complete. as per direction of Engineer-in-charge. |
| 3 | Supplying, Installation, Testing & Commissioning of 12-15 watt LED Down lighter LED Recessed /surface Down lighter (Round / square/ Rectangular) (SMD Type) (System lumen efficacy >135lm/Watt). SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range - 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection , life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/ 4000°K /5700°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3. Fixture shall be of relevant BIS standard. Manufactures Mark/ Name Engraved/ Embossing / Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. |
| 4 | Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface including cutting the wall and making good the same in case of recessed conduit as required. |
| 5 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required: Double pole ( 20 amp) |
| 6 | Supplying and fixing 6 way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 7 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface medium class PVC conduit as required: 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 8 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.: 15/16 A switch |
| 9 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.: 6 pin 15/16 A socket outlet |
| 10 | Supplying and fixing 12 Module (200mmX150mm) size/ modules, GI boxalong with modular base & cover plate for modular switches in recess etc. as required. |
| 11 | Note-1: General Notes 1.For their own interest, contractors are advised to inspect the site with prior permission before quoting their rates. 2. All the samples of materials which are to be used shall be approved by the department in advance. 3. The contractor shall comply with the provision of the Payment of Wages act 4. Rates quoted shall be inclusive of all cost of materials, labour, carriage, taxes, GST, labourcess, water charges, elctricity charges, signorage charges, wastages etc.. 5. Rates quoted shall be excluding the amount of EPFO and ESIC contributions. EPFO and ESIC contributions are reimbursable on production of valid proof of payment made by the contractor as per CPWD norms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender