Tender For Repair And Renovation Works Of Type-Iii (P), Type-Iii (T), Type-Iv (P) & Type-Iv (T) Quarters At Rangit Power Station
Tender Value
70.55 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
9 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West District → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Works Of Type-Iii (P), Type-Iii (T), Type-Iv (P) & Type-Iv (T) Quarters At Rangit Power Station
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (Steel or wood) shutter incl. chowkhats, architrave, holdfasts etc. complete and stacking within 50 mtrs lead of area 3 Sqm and below |
| 2 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm and under, incl. cutting the patch in proper shape, racking out joints and prepairing and plastering in the surface of the walls complete incl. disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge with cement mortar 1:4 (1 Cement : 4 Fine Sand) |
| 3 | Providing and fixing anodized aluminum works for doors,windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws, all complete as per design and drawings and the direction of the Engineer ‐ in ‐ Charge. |
| 4 | Providing and fixing glazing in Al. doors and windows ventilaor shutters and partitions etc. with PVC / neosprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer ‐ in‐ Charge. |
| 5 | Providing and Laying flooring with granite marble stone slab 20mmthickgranitestoneslabsflooringofsizenotlessthan1.0 sqm of 20mm thick laid over 20mm (average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, asper the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 6 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size). |
| 7 | Providing and laying first class brick workin half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1cementand4coursesand) including carriage of bricks upto work site, curing etc all complete. |
| 8 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete. 1:4 Mix. |
| 9 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on Old surface. |
| 12 | Providing and Providing and painting with plastic Emulsion paints one or more coats on Old surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 13 | Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including cleaning the surface complete on old surface. |
| 14 | Providing and erecting single scaffolding arrangements by bamboos, planks, etc. complete including dismantling and removing after use. |
| 15 | Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 16 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state). Floor slab, roof slab, landing, balcony and accessplatform. |
| 17 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state). Floor slab, roof slab, landing, balcony and accessplatform. |
| 18 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state). Square columns. |
| 19 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3 (1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm & down size) |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. 15 mm nominal outer dia Pipes. |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter. |
| 22 | Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. 100 mm dia. Supreme / Prince. |
| 23 | P/F stainless Steel Kitchen Sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. 610 x 450 x 200 mm. |
| 24 | Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete. With locally available timber. |
| 25 | Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete. 30mm. |
| 26 | Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete. |
| 27 | Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 28 | Providing / Fitting / Fixing Gypsum board ceiling having composite thickness of 67mm consisting of frames and double skin 8.5mm thick glass reinforced gypsum (GRG) board manufactured by spray suction technique with high strength plaster of paris confirming to IS 8272 i/c providing and fixing frame works made of special section power pressed MS sheet and galvanized with Zinc coating of grade 175and consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm width 0.50 m thick fixed to floor/ceiling at spacing 610 mm centre to centre by 6mm dia. bolts and nuts to both ends of ceiling (hang on truss)/ partition fixed on wall with rawl plugs) at the spacing of 450mm c/c and fixing of GRG boards to either frame work by 20mm long drive screws on studs, floors, ceiling channel spacing of 300mm c/c i/c jointing and finishing to a flush finish with recommended joints filler, join paper tapes i/c two coats of primer suitable for GRG board as per manufacture specification all complete: |
| 29 | Providing, fitting, fixing of 24 BWG Pre‐painted HULAS sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete |
| 30 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 31 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 32 | Head load of stock materials for a distance beyond 30m and within 100m distance |
| 33 | Head load of non stock materials for a distance beyond 30m and within 100m distance |
| 34 | Loading and unloading of Boulder/Stone/aggregates/sand/kanker/Moorum |
| 35 | Loading and unloading of cement or steel by manual means and stacking. |
| 36 | Cost of Haulage Excluding Loading and Unloading Surfaced Road (CEMENT & STEEL) |
| 37 | Cost of Haulage Excluding Loading and Unloading Surfaced Road (Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender