Tender For Shifting Of Dg Sets And Misc Petty Works At Hub/T.E/Bts Sites In Pilibhit Oa Under Bareilly Ba.
Tender Value
4.71 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
8 days left
EMD
9439
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pilibhit → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Shifting Of Dg Sets And Misc Petty Works At Hub/T.E/Bts Sites In Pilibhit Oa Under Bareilly Ba.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of existing DEA Set Open type/ silent canopy of following capacity & type i/c control panel with Power and control cable , Silencer and exhaust pipe , diesel tank , and associated fuel line and all other electrical accessories etc i/c placing the same in same bldg/ loading vehicle as per direction of Eng-In-charge i/c making good the damage etc. as reqd. (a) 10 KVA to 20 KVA |
| 2 | b) 25 KVA to 40 KVA |
| 3 | Shifting & transportation of existing dismantled DG Set of following capacity and type i/c all accessories i/c loading with Crane /hydra/chain pully and safe transportation from one location to other location as given below i/c unloading with Crane /chain pully on existing CC Foundation /space as per direction of Eng-In-charge at new location etc etc. as required (a) 10 KVA to 20 KVA (up to 50 KM) |
| 4 | b) 25 KVA to 40 KVA (up to 50 KM) |
| 5 | Installation, testing , commissioning of Existing DEA set on existing foundation/surface with all accessories like Cubical type manual /AMF control panel i/c fixing of Silencer ,exhaust pipe , fuel tank , fuel line connections, control wiring from panel to engine i/c cutting, jointing, welding of flanges (if reqd) , nuts, bolts , i/c loading and assembling ,fixing the the DG Set i/c making good the damage etc. i/c One hour testing of DG set on exchange load etc as reqd (a) 10 KVA to 20 KVA |
| 6 | b) 25 KVA to 40 KVA |
| 7 | Visit charges to check the fault of existing DG Set at TE / BTSs sites i/c analysis of fault and making the detailed list of defects with the help of specialized manpower and estimation of the same etc. complete as required. a) Up to 25 KM from the District head quarter |
| 8 | b) From 26 KM to 100 KM from the District head quarter |
| 9 | Providing & Making of General Servicing of the following capacity existing E/A sets of different make and model installed at TE/BTS Sites i/c replacement of Lube oil, lube oil filter and diesel filter and cleaning of all parts of DG set like fuel line ,cooling system ,checking of all DG control wiring ,belt and drives for proper working as per manufacturer recommendations complete i/c Fare and labour charge i/c complete as reqd. - Note: (1) 1. Diesel for initial testing of DG set will be arranged by the contractor 2. The recovered black oil shall be given to contractor) (a) 10 to 20 KVA EA Set |
| 10 | b) 25 to 40 KVA EA Set |
| 11 | Replacement of following item in the existing DG sets upto 40 KVA of different make and model installed at TE/BTS Sites, i/c removing of faulty item (if reqd), making connection, testing etc complete as reqd. a) Radiator Coolant Pre Mix ready to use (Make -kirloskar /HP/Fleet guard) |
| 12 | b) Steel wire braided fuel pipe with benjo bolts & washer |
| 13 | c) Battery Leads with brass terminals of Standard Length & Size suitable up to 130 AH battery |
| 14 | d) Battery leads Brass Terminals |
| 15 | e) Solid state SMPS or SCR based battery charger with suitable capacity input and output supply leads suitable up to 12V, 180 AH Battery |
| 16 | f) 12 V DC Stop Solenoid (Fuel shut off valve ) |
| 17 | g) Fan V Belt |
| 18 | h) Starting key switch |
| 19 | i) Hose pipe Set with Clip |
| 20 | j) Stop /Start Push button |
| 21 | k) Electronic Hour Meter suitable for 230 Volt AC supply |
| 22 | l) Air cleaner element |
| 23 | m) Fuel feed pump |
| 24 | n) Lube oil temperature gauge |
| 25 | o) Lube oil pressure gauge |
| 26 | p) Safety for low lube oil pressure along with necessary control wiring etc. |
| 27 | q) Safety for High cylinder temperature along with necessary control wiring etc. |
| 28 | r) Safety for high frequency/over speed along with necessary control wiring etc. |
| 29 | Calibration of the fuel injection pump & Injector up to 62.5 KVA capacity of DEA sets of different makes and models under various exchanges I/c removal of fuel pump from site, transportation at Workshop, calibration of pump and nozzles, grinding and fixing the same after calibration at site in the existing DEA set etc complete as reqd. |
| 30 | Repairing & General Servicing of the existing faulty radiator in existing DEA set up to 62.5 KVA by repairing of leakage and cleaning of copper tubes with help of cleaning gents, Dismantling of radiator assembly including transportation, brazing and testing for leakage and re-installation after repairing the same etc. reqd. |
| 31 | Repairing of Control Wiring of existing engine protection system /control panel /Start- stop with suitable size copper wire i/c 12 DC Relay with lugs, terminal, connection plate, testing commissioning etc as reqd. |
| 32 | Replacement of AVR Card in the existing Alternator at TE / BTS Sites i/c dismantling the faulty, replacement by new one i/c fixing, testing, commissioning etc. complete as reqd. |
| 33 | Providing following items in the existing sound proof enclosure of DG set, capacity upto 40 KVA E/A sets i/c removing of faulty item (if reqd) fixing with welding ,finishing etc complete as reqd. (a) Canopy inter lock |
| 34 | b) Chitakani (Sliding Door Bolt) |
| 35 | Repairing and Servicing of the 12 V self-starter of DEA set i/c dismantling, cleaning of self with petrol, greasing and oiling of bearing i/c replacement of carbon brush, solenoid coil, bentrx gear testing etc complete as reqd. |
| 36 | Replacement of 12 V Self-Starter of DE/A set i/c dismantling etc. complete as required. |
| 37 | Replacement of 12 V battery charging alternator i/c dismantling etc. complete as required. |
| 38 | Repairing of existing control panel of E/A set up to capacity of 40 KVA i/c replacement of following faulty components (a) 0-500 Volt Voltmeter |
| 39 | b) 0-100 A Ammeter with CT |
| 40 | c) Indicating lamp |
| 41 | Providing rewinding of alternator with good quality enameled copper conductor of suitable size up to 62.5 KVA DG sets i/c dismantling/reassembling of alternator and transportation from TE/BTS to workshop and back etc. complete as reqd. (The old copper shall be the property of contractor) |
| 42 | Supplying and fixing of 12 Volts Maintenance free Battery of following capacity for E/A sets, i/c initial charging, battery terminals, transportation, testing, commissioning etc. complete as reqd.(Note: Battery should be of at least 24 months full replacement warranty/ Manufacturer warranty card with dealer stamp shall be submitted along with new battery) (a) 12 V, 88 AH |
| 43 | b) 12 Volt 130 AH |
| 44 | Supplying & Fixing of 63 Amp 415 Volt TPN Switch disconnector fuse Unit (M/s L&T Make : FN-63 or SS make) with sheet steel enclosure, HRC fuses and all accessories i/c connection etc complete as required. |
| 45 | Replacement of faulty 63 Amp, 4 pole 415 V off Load Change over Switch with side handle operation in sheet steel enclosures on wall, connection etc. (Make - HPL or SS make) |
| 46 | Supplying & Laying of 4 x 16 Sqmm PVC insulated PVC sheathed Al. conductor armored cable of 1.1 KV grade etc. complete as required. |
| 47 | Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 4 X 16 sq. mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender