Tender For Comprehensive B/R And E/M Repair/Maint In Yogerndra Vihar Under Ge Gwalior.
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
17 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive B/R And E/M Repair/Maint In Yogerndra Vihar Under Ge Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed. |
| 2 | M & L for Washed stone grit plaster on exterior walls in two layers, (i) under layer 12mm thick in CM 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, (ii) top layer 15mm thick in CM 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern and colour including scrubbing and washing, the top layer with brushes and water to expose the stone chippings (Payment for providing grooves shall be made separately) complete all as specified and directed. |
| 3 | M & L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction. |
| 4 | M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement complete all as specfied and directed. |
| 5 | M&L for cleaning and preparing existing decorated surfaces of exterior and interior walls, ceilings, projections and chajjas by removing the old paint treatment through mechanical sanding using high speed sander (RPM 1500–2700) fitted with inbuilt dust extraction arrangement to minimise dust during operation, approved by reputed paint manufacturers; including removal of vegetation, cutting of tree trunks/branches and uprooting of grass adjacent to surfaces, cleaning the surfaces with bleaching powder solution to control fungal growth and allowing the surface to dry properly; thereafter applying minimum two coats of premium quality 100% acrylic exterior emulsion paint having VOC content not exceeding 50 gm/litre with UV resistance conforming to IS 15489:2004, resistant to alkali, fungus and dirt with high elasticity capable of covering hairline cracks up to 3.2 mm, of approved shade (Company Depot Tinted) containing silicon additives, applied @ 1.43 litre per 10 sqm over one coat of exterior primer recommended by the manufacturer applied @ 0.90 litre per 10 sqm, complete all as specified and directed. |
| 6 | Material & Labour for applying two coats of premium quality 100% acrylic exterior emulsion paint having VOC content not exceeding 50 gm/litre with UV resistance conforming to IS 15489:2004, resistant to alkali, fungus and dirt with high elasticity capable of covering hairline cracks up to 3.2 mm, of approved shade (Company Depot Tinted) containing silicon additives, applied @ 1.43 litre per 10 sqm over one coat of exterior primer recommended by the manufacturer applied @ 0.90 litre per 10 sqm, complete all as specified and directed. |
| 7 | M&L for 10 mm thick rendering in cement mortar (1:6) on fair faces or brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed. |
| 8 | M&L applying two coats OBD over & including 1mm thick waterproofing putty complete all as specified and directed. |
| 9 | S&F GI wire netting/ Chicken wire mesh 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed. |
| 10 | M&L for 5mm thick rendering in CM (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M/L for three coats of white wash on New surfaces (wall) including all prereration complete all as specified & directed |
| 12 | M/L for three coats of white wash on New surfaces of Ceiling including all prereration complete all as specified & directed |
| 13 | M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed. |
| 14 | M&L for preparation of for complete removing of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coats of distemper oil bond emulsion by using rollers over & including 2 mm thick water proof putty complete all as specified and directed. |
| 15 | M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on wall complete all as specified and directed. |
| 16 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and directed. |
| 17 | S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 18 | ditto as item No 17 but fixed in wall |
| 19 | S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 20 | ditto as item No 19 but fixed in wall |
| 21 | S& F PVC SWR bends any radius 75mm dia with access door or without access door complete all as specified and directed. |
| 22 | S& F PVC SWR bends any radius 110 mm dia with access door or without access door complete all as specified and directed. |
| 23 | S& F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door or without access door complete all as specified and directed. |
| 24 | S& F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door or without access door complete all as specified and directed. |
| 25 | S&F PVC SWR vent cowl 110 mmn dia complete all as specified and directed. |
| 26 | S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified and directed. |
| 27 | S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified and directed. |
| 28 | S&F 75 mm bore PVC (SWR) couplers complete all as specified and directed. |
| 29 | S&F 110 mm bore PVC (SWR) couplers complete all as specified and directed. |
| 30 | S&F 110 mm bore PVC (SWR) junction (double T), equal or unequal complete all as specified and directed. |
| 31 | S&F 110mm bore PVC pipe 'P' or 'S' trap, complete all as specified and directed. |
| 32 | S&F 40mm bore steel water tubing medium grade galvanised inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specified and directed. |
| 33 | Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed. |
| 34 | Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed. |
| 35 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and directed. |
| 36 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and directed. |
| 37 | S&F in repair W.C vitreous china, (semi pedestal pattern) anglo type white (excluding flushing cistern and flush pipes ) including seat cover, jet fixing bolt & P - or S trap,flush pipie complete all as specified and directed |
| 38 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 39 | S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. |
| 40 | S&F in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore, waste pipe of PVC 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and directed. |
| 41 | S&F in repair 15mm bore CP fancy type bib tap cast copper alloy with crutch or butter fly handle (Long Body), screwed down screwed for iron pipe complete all as specified and directed |
| 42 | S&F 600mmx450mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 43 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 44 | S&F in reapir 15 mm bore brass CP wall mixer for mixing hot & cold water with shower controlled (3 in 1 wall mixer) screwed down for iron pipe and fixed complete all as specified and directed. |
| 45 | S&F in repair stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 46 | S&F in repair 15 mm nominal bore two way angle valve brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 47 | S&F in repair Brass chromium plated shower rose 125mm dia size with15 mm shower arm complete all as specified and directed. |
| 48 | S&F in reapir 15 mm bore brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed |
| 49 | S&F in reapir 15 mm bore brass CP Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed |
| 50 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender