Tender For Drilling Of Tubewell By F.D.R Machine Amd Installation Of 5 Hp Submersible Motor Pump Set & Pipe Line At Shree Mangalnath Mandir Parisar
Tender Value
3.70 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
12 days left
EMD
7410
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ujjain → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Drilling Of Tubewell By F.D.R Machine Amd Installation Of 5 Hp Submersible Motor Pump Set & Pipe Line At Shree Mangalnath Mandir Parisar
BOQ
| Sl. No. | Item Description |
| 1 | Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings.20.1/254 |
| 2 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 150mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.4/P-255 |
| 3 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc.20.4.1/P-255 |
| 4 | in all types of rocks.20.4.2/P-255 |
| 5 | Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 1992 with IVth revision (Up-to-date amendments) 150 mm dia20.25/P-259 |
| 6 | Drilling of perfectly vertical bore hole of 150mm diameter upto desired depth below ground level in all types of rock including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete20.5/P-255 |
| 7 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 125mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125mm nominal diameter M.S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.2/P-254 |
| 8 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. 20.2.1/P-254 |
| 9 | in all types of rocks.20.2.2/P-254 |
| 10 | Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 1992 with IVth revision (Up-to-date amendments) 125 mm dia20.25/P-259 |
| 11 | Drilling of perfectly vertical bore hole of 115 mm diameter up to desired depth below ground level in all types of rocks including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.3/P-254 |
| 12 | Providing and fixing of well cap on top of the tube well for protection m.s. caps20.9/P-256150 mm dia |
| 13 | Supplying & Installation of Energy efficient five star BEE rating ISI Marked required capacity of Three Phase, 50 Hz, 415V, deep well submersible pump Steel body, suitable for 6\\" tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including 3 mtr. submersible flat cable ISI marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. The size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire ropeMPPHED SOR Sep. 2023 5 H.P. with 10 to 11 stages, Head Mt. 101-40 Discharge LPM 60-27011.3/P-164 |
| 14 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.4.0 Sq.mm.multi strand 11.5/P-165 |
| 15 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part II3.1/P-47 |
| 16 | 32 mm dia (medium) |
| 17 | 50 mm dia (medium) |
| 18 | Labour for laying and jointing of following galvanized Iron (MS) pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints and cost of jointing materials but excluding cost of pipes & specials.32 mm dia (medium)3.2/P-48 |
| 19 | Labour only for taking out of three phase submersible pumping set from the tube well with pipe line assembly, electrical cable, testing etc. complete including disconnecting the electrical cable from pump & starter (i) 3 HP to 7.5 HP - Depth up to 150 mtr26.22.1/P-331 |
| 20 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 8 Kg/sq.cm : 32 mm dia UADD SOR VOL. - I 2nd Aug. 20217.1.3/P-103 |
| 21 | Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. Screwed 32mm dia6.8.4/P-90 |
| 22 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work) 32mm dia6.27.4/P-95 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender