Tender For Construction Of Toilet Building For Sanitary Workers @ Thallakulam Muthanandhasamimadam Street In Ward No : 31 Zone - Ii
Tender Value
4.82 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
5 days left
EMD
4821
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet Building For Sanitary Workers @ Thallakulam Muthanandhasamimadam Street In Ward No : 31 Zone - Ii
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete 10 m3 |
| 2 | Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standardspecification |
| 3 | Plain Cement Concrete 1:4:8 (One cement four sand and eight aggregates) using 40mm gauge hard broken granite jelly for foundation including consolidation and dewatering for foundation whenever necessary etc. complete. |
| 4 | Supplying and filling the basement with Well Gravel filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification. |
| 5 | Suppling and erecting shuttering with necessay supports for Plinth Beam with all cross bracings etc., complete ( Side Only) the payment for centering shall be given offer the concrete is laid vertical portion using steel plate. |
| 6 | Supplying, erecting with necessary supports for plain surface such as RCC Boxing side slab and silmilar RCC slab with all cross bracing etc., complete in all floors of any height ( the retrived materials ) should be taken back by the contractor the payment for cenetering shall be given after the concrete is laid ( vertical portion ) 10m2 etc., complete |
| 7 | Supplying and erecting centering for size and sofftits support for plain surface such as reinforced cement slap rectangular beams tee or L beams linteals bed blocks stair and landing slap landing beams , beams etc., comp. in all any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (Bottom only) portion using steel plates – 10m2 |
| 8 | Reinforced Cement concrete 1:1 1/2:3 (One cement one and half sand and three aggregates) using 20 mm gauge band broken granite chips for foundation including consolidation and dewatering for foundation wherever necessary etc.complete. (GF) |
| 9 | Suppling and fabricating and placingin position MS (or) R.T.S.bar for reinforcement toal lRCC works as per the design given including cost of steel and binding wire also in all floors. |
| 10 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\\"X43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT, For Ground floor. |
| 11 | Plastering with cement mortar (1:5),12 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 12 | Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 13 | White washing Two coats using freshly burnt shell lime, in all floors, including cost of lime and other materials such as brushes, kanjee, scafolding charges etc. Complete. |
| 14 | Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 15 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement Colour |
| 16 | Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 17 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc.,complete complying with standard specifications and as directed by the departmental officers |
| 18 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 19 | Supply of PVC Pipe and Specials etc Complete 32mm CPVC Pipe |
| 20 | 32mm CPVC Coupler |
| 21 | 32mm CPVC Bend |
| 22 | 32mm CPVC Elbow |
| 23 | 32mm CPVC End Cap |
| 24 | 32mm CPVC Tee |
| 25 | 32mm Non Return Valve |
| 26 | 75mm PVC Pipe |
| 27 | 75mm PVC Coupler |
| 28 | 75mm PVC Bend |
| 29 | 75mm PVC Elbow |
| 30 | 75mm PVC End Cap |
| 31 | 75mm PVC Tee |
| 32 | 110mm PVC Pipe |
| 33 | 110mm PVC Coupler |
| 34 | 110mm PVC Bend |
| 35 | 110mm PVC Elbow |
| 36 | 110mm PVC End Cap |
| 37 | 110mm PVC Tee |
| 38 | PVC Adhesive (Solution) - 100Gram |
| 39 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). etc, complete as per standard specifications. SD 23 |
| 40 | Supply and fixing of AC Exhaust Fan 300 mm (12”) sweep (Light duty) including cost of all materials,/abour, lead, lift, etc complete |
| 41 | Supplying and Fixing for 18W 4 Feet LED fitting with LED including Labour Charges Etc Complete |
| 42 | Supply and delivery and Iixing of HDPE tank as per lS 12701 / 1996including loading,unloading, transportation and labour charges for fixingof the Gl pipes and specials for pipe connection works including cutting, lhreadino and flxino charoes elc.. (500 Litre Capacity) |
| 43 | Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing medium weight L.S cover and frame etc.complete.., (Size 90X90) |
| 44 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. Fully panelled Single leaf - Door |
| 45 | Ventilator |
| 46 | Add GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender