Tender For Providing Miyawaki Arrangements At Salamedu Housing Board In Villupuram Municipality.
Tender Value
9 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
5 days left
EMD
9000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Villupuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Miyawaki Arrangements At Salamedu Housing Board In Villupuram Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, Conveyance of surplus earth upto 2Km etc., complete complying with standard specification. |
| 2 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means |
| 3 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means |
| 4 | Supply and fixing of Chain link - 2\\" x 2\\" using 10 Gauge Galvanised Iron Wire (of all sizes) the rate is inclusive of the labour chargess for cutting and fixing with binding wire etc.complet. |
| 5 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 6 | Drilling of 150 mm dia vertical bore well in hard rock area including drilling charges and including injection of casing pipe in the drilled hole etc complete (Page No:219) |
| 7 | Supply and delivery of 160 mm dia PVC causing pipe 6KSC/CM2 including cost of pipe ea complete |
| 8 | Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete |
| 9 | Supply and delivery of Wet type Submergible including all labour charges etc., complete., Submergible Motor 15 lpmx 80m.head 1 H.P (Page No:96) |
| 10 | Supply of 32mm UPVC Pipes specially made for deep borewell Submersible motor erection (ISI Make) including all cost materials, conveyance labours etc., complete as directed by departmental officers. |
| 11 | Cost and supply of 4Sqm cable 3 core including cost and conveyance of materials etc., complete (Page No:114) |
| 12 | Cost and supply of Nylon rope including cost and conveyance of materials etc., complete |
| 13 | Cost and supply of 32mm GI pipe inculding cost and conveyance of materials etc., complete (Page No:39) |
| 14 | Cost and supply of 32mm GI Coupling inculding cost and conveyance of materials etc., complete (Page No:42) |
| 15 | Cost and supply of 32mm GI Union inculding cost and conveyance of materials etc., complete (Page No:42) |
| 16 | Cost and supply of 32mm GI Gatevalve inculding cost and conveyance of materials etc., complete (Page No:43) |
| 17 | Cost and supply of 32mm GI Elbow inculding cost and conveyance of materials etc., complete |
| 18 | Cost and supply of 32mm GI Tee inculding cost and conveyance of materials etc., complete |
| 19 | Cost and supply of 32mm PVC Ball Valve. inculding cost and conveyance of materials etc., complete |
| 20 | Cost and supply of 20mm PVC screw down tap heavy type including cost and conveyance of materials cost. As per PWD schedule rates pg.no 48 |
| 21 | Cost and supply of 40mm Clamp Set including cost and conveyance of materials cost etc., complete (Page No:42) |
| 22 | Cost and supply of 160 mm pvc end cap including cost and conveyance of materials cost etc., complete |
| 23 | OVER HEAD MAINS;Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD - 64 |
| 24 | Cost and supply of Panel Board including cost and conveyance of materials cost etc., complete |
| 25 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.sd 125 |
| 26 | Labour charges for Errection of submergible Pump set in bore well including fixing and jointing submergible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth values Errection clamps pressure gauges up to the exterior wall of pump room and errction of panel board consisting of TPICN switches starter volmeter ammeter three pilot indicator lamps complete and testing the pump set and trail run for 10 days up to 5 HP. (Page No:226) |
| 27 | Supply and delivery of MS KIOSK of size 0.75 x 0.45 x 0.75m made up MS angle of size 50mm x 50mm x 3mm alround coverd with 18 gauge MS up of MS plates of size 25mm x 3mm including cutting Welding Grinding, Locking arrangements and Labour charges etc., complete for fixing of meter board. Switch board with MS door and lock and key arrangements (Page No:83) |
| 28 | Supply and delivery and fixing of HDPE tank including loading and unloading. Transportation fixing and necessary GI Pipe and specials for pipe connection works including cutting. Threading and fixing charges as directed by departmental officers etc., complete (1000 Lit capacity 1 No) (Page No:83) |
| 29 | Providing Sintex Tank Peddestal with RCC 1:1.5:3 platform of Size 1.20 X 1.20 X 0.15 using with Column hight 1.00m from ground level and bottam platform with tailes .including cost and conveyance of materials and labour charges etc., complete. |
| 30 | Providing KISOK Box Platform of Brick Masonary Peddestal of size 0.90 x 0.60m 1.20m to fix the ' KISOK' with plat form in B.W Cement Mortor 1:5 masonry to a required item of 1.00m above grand level and plastering with Exposed surface with cement mortor 1:5 12mm thick including cost and conveyance of materials and labour charges etc., complete. |
| 31 | Light Jungle Clearance including removal of grass, shrubs in complete as per standard specification |
| 32 | Digging of 60 cm3 pit in all type of soils for avenue plantation (FR-L5155, Man days required -9.26) |
| 33 | Planting/ Seeding of plant in all type of soil ( FR- L5301, Man days required- 1.710) |
| 34 | Supplying of plant to site |
| 35 | Shurb |
| 36 | Sub tree |
| 37 | Watering for Plantation/ Tree from the nearby source open well/ Bore well / open source (FR-L5135, 1.33 for 1000 plants ) |
| 38 | GST. 18% (CGST-9%, SGST-9%) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender