Tender For Construction Of New Toilet At Near Nehru Stadium Voc Sports Complex In Ward No 83 Central Zone Roc No. 3484 /2026/Md5
Tender Value
30 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
9 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Toilet At Near Nehru Stadium Voc Sports Complex In Ward No 83 Central Zone Roc No. 3484 /2026/Md5
BOQ
| Sl. No. | Item Description |
| 1 | Earth \/icrk excavation for foundation in Hard stiff clay, stitf black cotton, hard red earth, shales murram,gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wetsand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete Earthwork Excavation |
| 2 | Supplying and fllling in foundation and basement wth Crushed Stone Sand (M-Sand) in layers of not more than '1scm thick well rammed watered and compacted etc., Complete complying with standard Specification.-M Sand filling |
| 3 | Plain Cement Concrete l:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance ot all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 4 | Supplying and erecting steel centering including necessary supports for plane surfaces for ReinforcedCement Concrete works such as column footings, column pedestals, plinth beams, grade beams,staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, Iaid over silveroak joists of size 1ocm x 6.scm spaced at about 75cm centre to centre or at suitable intervals etc.complete in all floors complying with standard specifcation. (Payment for centering shall be givenafter the concrete is laid) - Centering 1 |
| 5 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 1ocm x 6.50 cm spaced at abote 30 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) - Centering 2 |
| 6 | a)For plane surface such as slab ,beam ,ete |
| 7 | b)For plane surface such as rectangular or square RCC coloumns,sunshades,top and bottom slab of Rcc boxing ,etc |
| 8 | M-20 CONCRETE - Providing and laying in posrtjon, standarised design mix M-20 Grade using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350K9/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) inrecommended proportions as per lS:9103 to accelerate, retard setting of concrete, rmprove workability without impairing strength and durability Wth about (5.70 cu.m.)940.50K9 of 20mm machine crushed stone jelly and with about (2.80 cu.m.)462.00K9 of 10-12mm machine crushed jelly and with about (4-25 cu.m.) 701.25K9 of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating wth mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor/roof slabs wherever neccessary without clambing extra, etc. complete complying with standard specification and as directed by the departmental offlcers. the coarse and fine aggregates to be used should comply with the requierments of lS 383-2016. (No separate payment will be made by the department for the exces usage of materials as per desiqn mix.) |
| 9 | Suppling and fabricating and placing in position MS (or) R,T.S, bar for reinforcement to all RCC worksas per the design given including cost of steel and bindinq wire also in all floors. |
| 10 | Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4\\" x 41/4\\" x 23/4\\") including cost of materials and labour charges etc., as per standard specification - 1m3 |
| 11 | Supplying and filling in foundation and basement with Good earth in layers of not more than 1scm thick well rammed watered and compacted etc., complete complying with standard specification.- Basementfilling |
| 12 | Brick Partition Walls using II class ground moulded chamber bricks of size 9\\"X43/8\\"X 23/4\\" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm (Sl.No.211) |
| 13 | Plastering with cement mortar (l:5) 12mm ,thick in all floors including cost and conveyance of all matenlasto site and labour charges etc,complete as per standard specifications (S. 1.306) |
| 14 | Plastering with cement mortar (1:3) '1omm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications |
| 15 | White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and asdirected. -100sq.m S.I.333 |
| 16 | Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other newsurface and including cleaning, preparing the surface and curino etc.. comolete. |
| 17 | Paving the floor Wth design antiskid ceramic tiles (colour and shade as directed) of size 305mm x 305 mm x 6mm in all floor aver a base layer of cement mortar 1:3 (one cement and three sand) 20 mm thick laid in situ and pointed with same coloured cement. |
| 18 | Providing granolithic floor finish of 75mm thickness with plain cementconcrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly includinglaying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessaryplanking for panelling wherever necessary and as directed by the departmental officers) |
| 19 | Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and qualityand colour I Set in cement moftat 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointingwith white cement neatly as directed. |
| 20 | Solid PVC door shutters using 19 Gauge 1gmm MS square tubes for styles and outer frames. 15mm MSsquare tubes for top, Iock and bottom rails. The steel tubes shall be covered with smm thick solid PVCsheets. Shutter using smm thick solid PVC sheets for paneling shall rigidly fixed in position includingnecessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of toprail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm,with suitable rebale for housing the shutter and should have provision to fix AL drops, tower bolt hinges and lock plates inclusive of cost of all materials etc. complete complying with thew standard specifications. |
| 21 | Providing and fixing louvered ventilator fabricated from lroll formed sections made of galvanized steel colour lcoated or reported they still as per lS 513 D quality lgalvanized as per lS 277 ,vl/,lh the zinc of 120 grams lper sqm) with the total coated thickness of lPaint specification: court at sections should be with lprimer court of epoxy primer of 5-7 microns thick, lFinish painted with polyester paint of 12 - 16 microns thick, Dimensions of the sections: the section for external frame should be 57 mm x 33 mm Fixing details: the section should be cut to length jointl with profile to profile component Accessories: glass holding planes made of glass filled nylonGlass: louveres to be provided with 4 mm pin headed glassGrill: ventilator should be provided with grill made of 10 mm square MS bar to 12 mm x smm flat at 4 inchintervals.Total grill unit should be powder coated and fix it to ventilator frame with screws.The frames should be fixed to brick or concrete / Masonry walls and floor by means of self expaningscrews |
| 22 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from flnished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. ol 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 23 | Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1 mm thick)of size 100 mm x 60 mm with a rebate of 30/ 35 mm x 15 mm on one side of the frame including supplyingand fixing dovetail splayed end stainless steel Hold fast etc., PWD SOR P.NO 158 |
| 24 | Supplying & fixing door shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leafconforming to lS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesivesand CP screws complying with standard speciflcations. The rate is inclusive of threee coats of best qualityvarnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no.300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete. |
| 25 | Supplying and fixing in position best approved of BIS quality PVC Waste water pipes having a pressurekg. / sq.cm including cost of special clamps,brass screws nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall beinclusrve of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamps at the centre of the pipe line in addition to those for more than 6.0 meter pipe length, etc., complite with standared specification |
| 26 | 110mm dia pipe |
| 27 | 90mm dia pipe |
| 28 | Supply and delivery and fixing of HDPE tank as per lS 12701 / 1996 including loading,unloading,transportation and labour charges for fixing of the Gl pipes and specials for pipe connection works including cutting. threadina and fixino charges etc.. |
| 29 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / WheelValve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 30 | 25mm gun metal gate valve |
| 31 | 90mm dia pipe |
| 32 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved qualityand best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specialsusing PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs,PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good thedismantled portion to original condition with necessary brick work / cement concrete and plastering neatlyvvherever necessary with necessary scaffolding charges up to 4 meter height above ground level, etc.,complete complying with standard specifications. The PVC pipes shall be got approved by ExecutiveEngineer before use on works. |
| 33 | Supplying PVC Specials (with working pressure '10 kg. / sq.cm.) in water supply anangements (both in internal and external water suoolv arranoements |
| 34 | Coupler |
| 35 | 25mm dia |
| 36 | 32mm dia |
| 37 | Elbow |
| 38 | 25mm dia |
| 39 | 32mm dia |
| 40 | 25mm dia |
| 41 | 32mm dia |
| 42 | End Cap |
| 43 | 25mm dia |
| 44 | 32mm dia |
| 45 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 46 | PVC Elbow |
| 47 | 110mm dia |
| 48 | 75mm dia |
| 49 | PVC Tee |
| 50 | 110mm dia |
| 51 | 75mm dia |
| 52 | Supplying and flxjng in position best quality and approved make lndian made white / colour glazedearthenware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets,including cost 1smm dia brass CP pillartap. 32mm dia \\"8\\" class Gl waste pipe with rubber plug and chain.15mm dia GM wheel valve. 1smm brass nipple, 'smm dia nylon connection, 32mm dia CP brass wastecoupling including fixing of wash basin using Cl brackets on to the wall in position with TW plugs andscrews, rubber washers, white lead and givingl necessary water supply connectjon and painting thelbrackets with two coat of painting over a priming coatl of anti-corrosive paint including testing for teakagesl etc., complete complying with standard speciflcationl and as directed by the departmental officers. (Thel wash hand basin and specials should be got approvedl by the Executive Engineer before use on works). |
| 53 | Supplying and fixing in position {smm dia C.P.Shower rose & stop cock of approved make confirming to specifications and quality including cost of Shellac thread etc. complying with standard specification. |
| 54 | C.P.Shower Rose |
| 55 | Stop cock |
| 56 | Supplying and fixing in posltion C.P. Towel rail 600mm long and 20mm dia with brackets of samematerials including cost of teak wood plug and C.P. Screws etc. complete complying with standardspecrfication. |
| 57 | Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug andC-P. screws. etc. complete complying with standard specification. |
| 58 | Supplying and fixing in position lndian make bewelled edge miror of size 600 x 450mm quality including cost of Rawal plugs, brass screws. etc. |
| 59 | Supplying and fxing in position white / colour glued European Water Closet of best quality and approved make wilh 10O mm \\"P\\" or \\"S\\" trap connecting with Cl pipe of 100mm dia / PVC pipe of 11omm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 'l 0 liters capacity PVC I 12.5liters capacity porcelin low level flushing tank with a pair of Cl brackets, etc., complete with all fittings such as 1smm brass ball vafue with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using lndian adopter joint including all intnal fittings |
| 60 | Supply and fixjng in position of best lndian make white / colour glazed earthenware lipped mouth flal back urinal of best quality and approved make of size 430mm x 260mm x 350mm with Gl pipe, 32mm dia bellmouth PVC connection and waste pipe, 15mm dia Gl pipe of required length, 'l5mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws,etc., including dismantling masonry and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying wilh standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) |
| 61 | Supplying and fixing position Cl Nahani Trap I Floot kap of the following sizes with best slainless steel gralings of approved brand and quality, lixed over a bed of brick ielly lime concrete 1:2:5 (One part of lime, two part of Sand and five part of 40mm gauge brick jelly) and flnished with Cement Mortar 1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good thedismantled portions to the original condition and giving conneclion 10 the Cl / PVC pipes, etc., complete complylng with slandard specification. Ohe Nahani Trap should be gol approved by the Execulive Engineer before |
| 62 | Providing rain water harvesting using 3 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 6mm dia MS rod vertically and 3 No. of 6mm dia MS rod circumferentially tied together with '18 guage binding wire for well rings including necessary earth work excavation 'lm dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thickwhich inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directionsand one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing,finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects. |
| 63 | Earthling as per lSl Specification with an ea(h electrode ol 2.1mt class 'B' Gl pipe of dia not less than40mm and with 20mm dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangementusing charcoal, common salt, G.l-reducer, check nuts etc., and masonry work and providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers. (sD 233) |
| 64 | Supplying and run off 8 SWG copper wire on walls or below ground level with necessary'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental otflcers.(SD 75) |
| 65 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End |
| 66 | Supply and run otf 2 of 2.50sqm PVC insulated single core unsheathed copper conductor cable of 1100 Vgrade with lSl mark confirming to 15:694/1990 with continuous earth connection by means of 1.50 sqmPVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitablePVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials,cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. (denved from SD 55) |
| 67 | Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathed copper conductor cable of1100 V grade with lSl mark confirming to IS:694/1990 with continious earth connection by means of 1.50sqm PVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitablePVC rigid pipe 1.8mm thick concealed in wall ior mains including the cost of PVC pipes and specials,cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 54) |
| 68 | Supply and fixing of TNEB meter Board suitable for 32 A Three phase service connection with 32A fuseunit(500v)32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on T.W plank of size 600mm x450mm x19mm with supportingT.W.reepers of '1\\" thick oneither sider with painting withsuitable bolt and nuts forfixingthe TW plank on wall withearth connection and interconnection wlh 7120 Pvcinsulated copper wirefrom EBmeter to fuse unit. SO 127) |
| 69 | Supplyandrunof4of6sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitableheavygaugeMSconduitpipeonwallandceilingwithcontinuousearthwireconnectionof6sq.mmcopperwirewithpaintingofsuitable colour |
| 70 | Supply and run of 4 core '10 Sq.mm PVC Armoured cable of 1100 V grade with lsl mark.(Part E c) V |
| 71 | Wiring with 2 x 1.5 sqmm (22 lo.3 ) PVC insulated single core unsheathed copper conductor cable ol1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. swtch with continuous earth Wreconnection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVCconcealed light point / Fan point (For Electronic requlator). SD 23 |
| 72 | Wiring with 2 x 1.5 sqmm (22 10.3 \ PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories rnflush \Mth $all with 150 x 100 x 1'13 mm TW swtch box wth 3mm hylum sheet cover for 5A 3 pin non nteT locking CS plug with continucus eartn wrre connecticn of 14 SWG TC wire anc n'akin j Eood of the concealed portion with suitable ccloJr'3r ccncealed PVC plug point. SD 38 |
| 73 | 18 W LED Tubelight for T8 Fitting Single side (15- e) |
| 74 | Supply and Fixing 12\\" (30cm dia ) light duty Exhaust fan including coast at matterials labour,lead,lift,etc complette Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender